Artemide Meteorite 15

Product Overview

The Meteorite 15 is a lighting fixture designed by Pio & Tito Toso for Artemide. It is suitable for both indoor and outdoor use.

Key features and icons:

• [Indoor Use Icon]
• [Outdoor Use Icon]

General Information & Safety

Before proceeding with installation, please consult the provided documentation. The installation process involves several steps requiring careful attention.

General icons found in the manual:

• ❓: Indicates a question or point of clarification.
• ?: Refers to documentation or instructions.
• ?‍?: Represents guidance or a person following instructions.

Installation Steps

The following steps detail the installation process for the Meteorite 15 fixture:

1. Step 1: Detach Diffuser

   Rotate the spherical diffuser counter-clockwise to detach it from the main body of the fixture.

2. Step 2: Remove Diffuser

   Carefully lift the detached diffuser upwards.

3. Step 3: Remove Retaining Ring

   Remove the circular retaining ring from the lamp holder assembly.

4. Step 4: Unscrew Assembly

   Using a screwdriver ?, loosen and remove the screws securing the lamp holder assembly to the mounting base.

5. Step 5: Disconnect Assembly

   Gently pull the lamp holder assembly downwards and away from the mounting base.

6. Step 6: Wiring and Sealing

   Connect the electrical wires to the appropriate terminals. The wire colors are typically white/blanc/blanco, green/vert/verde, and black/noir/negro. Apply silicone sealant to the wire entry points for protection.

7. Step 7: Component Seating Check

   Ensure all components are correctly seated. A correct fit is indicated by a check mark ✔️, while an incorrect fit is shown with a cross mark ❌.

8. Step 8: Install Light Bulb

   Install a light bulb into the socket. The recommended bulb type is a Max 7W E12 cULus SBLED. The bulb should not exceed 80 mm in height and 50 mm in diameter.

9. Step 9: Reattach Diffuser

   Carefully place the diffuser back onto the lamp holder assembly.

10. Step 10: Secure Diffuser

    Rotate the diffuser clockwise to secure it in place. A final check mark ✔️ confirms the diffuser is properly installed.

Technical Specifications

• Bulb Type: Max 7W E12 cULus SBLED
• Maximum Bulb Height: 80 mm
• Maximum Bulb Diameter: 50 mm

Care and Maintenance

For cleaning, use a soft cloth ?. Ensure the fixture is powered off before cleaning.

Product Code: Y513000988A