Aldes 11091064 Susp. Rapid. 2m 0-45 kg
Accessory for installation
Product Description
The rapid suspension cables are used to suspend circular, oval, and rectangular air ducts, small fans, air handling units, and also to secure plenums and diffusers. The system consists of a flexible steel cable equipped with a loop end fitting. The other end, free, slides into the locking system, allowing the supported object to be positioned during and after installation. The release system is integrated.
Application Areas
Residential collective housing, Residential individual housing, New construction, Renovation, Tertiary premises
Implementation
- First, pass the cable around a building structure and then through the loop.
- Pass the cable through a groove in the locking system.
- Pass the cable around the duct and then through the other groove of the locking device.
Reference Argument
Application:
- Suspension of circular, oval, rectangular air ducts
- Suspension of small fans, air handling units
- Suspension and securing of plenums + diffusers
Description:
- Pack of 10 rapid suspensions of 2 m for loads from 0 to 45 kg
- Flexible galvanized steel cable with a loop end fitting at one end and free at the other end for product attachment
- Integrated release system
Main Features
- The assembly is made of galvanized steel.
- HK hook:
- Hook for fixing without a plug for solid or hollow concrete slabs, etc.
- Stainless steel hook that fits into an M8 hole.
- Working load: 75 kg.
- Cable n°1:
- Thickness: 1 mm,
- Admissible load: 0-15 kg,
- Use: securing plenums; ducts Ø < 200 mm.
- Cable n°2:
- Thickness: 2 mm,
- Admissible load: 10-45 kg,
- Use: all ducts.
General Data
| References | Maximum Load (kg) |
|---|---|
| 11091064 | 45 |
Installation
Diagram showing the installation of rapid suspension cables.
Diagram showing the installation of rapid suspension cables.
