Aldes 11091064 Susp. Rapid. 2m 0-45 kg
Mounting Accessory
Product Description
Quick-mount suspension cables are used to suspend circular, oval, and rectangular air handling units, small fans, fan coil units, and also to secure plenums and diffusers. The system consists of a flexible steel cable equipped with a loop end fitting at one extremity. The other extremity, free, slides into the locking system, allowing for the positioning of the supported object during and after installation. The release system is integrated.
Application Areas
- Collective residential housing
- Individual residential housing
- New construction
- Renovation
- Commercial/Tertiary premises
Implementation / How-to
- First, pass the cable around a building structure and then into the loop,
- Pass the cable into a groove of the locking system,
- Pass the cable around the duct and then into the other groove of the locking device.
Visual guide showing the steps for installing the quick-mount suspension cables.
Reference Argument
Application:
- Suspension of circular, oval, rectangular air handling units
- Suspension of small fans, fan coil units
- Suspension and securing of plenums + diffusers
Description:
- Pack of 10 quick-mount suspensions, 2 m, for loads from 0 to 45 kg
- Flexible galvanized steel cable equipped with a loop end fitting at one extremity and free at the other extremity to allow product fixing
- Integrated release system
Key Features
- The entire assembly is made of galvanized steel,
- HK Hook:
- Fixing hook without anchor for solid or hollow concrete slabs, joists, etc.,
- Stainless steel hook fixing into an M8 hole,
- Working load: 75 kg.
- Cable No. 1:
- Thickness: 1 mm,
- Admissible load: 0-15 kg,
- Usage: securing plenums; ducts Ø < 200 mm.
- Cable No. 2:
- Thickness: 2 mm,
- Admissible load: 10-45 kg,
- Usage: all duct types.
General Data
| References | Maximum Load (kg) |
|---|---|
| 11091064 | 45 |
