Aldes TO GALVA - D450/450: Galvanized Steel 45° Oblique Tee
The Aldes TO GALVA - D450/450 is a specialized galvanized steel fitting designed for ventilation systems. It allows for the connection of two branches of a galvanized duct system at a precise 45° angle.
Product Description
The 45° oblique tee (TE 45°) is specifically engineered to connect two branches of a galvanized duct system at a 45° angle. These fittings, often referred to as 'TO' fittings, are recommended over standard 90° tees ('TE') in supply air applications. They ensure a leak-free installation and minimize excessive pressure drops at the takeoff point.
Applications
This fitting is suitable for a range of applications including:
- Residential collective housing
- New construction
- Renovations
- Tertiary sector premises
Installation and Features
- Ease of Assembly: Fittings are designed for push-fit assembly, with male fittings connecting to female ducts.
- Sealing: A sealant and/or a perforated tape should be used to ensure airtightness.
- Fixing: Secure the fitting to the duct using self-drilling screws (4 to 6, depending on the diameter).
Reference Argument
- Application: Connects two duct branches at a 45° angle in tertiary and collective residential networks.
- Performance: Offers superior performance in supply air systems compared to a 90° tee.
Product Details
- Type: Oblique tee
- Material: Galvanized steel
- Diameter: 450/500 mm
Key Characteristics
- Available in diameters ranging from 80 mm to 900 mm.
- Manufactured from galvanized steel conforming to EN 10346 standard, ensuring consistent coating quality.
- Fire classification: MO.
General Data
| Reference | Main Material | Nominal Diameter (mm) | Fire Classification |
|---|---|---|---|
| 11093295 | Galvanized Steel | 450/500 | MO |
For more information, please contact your Aldes advisor. Visit www.aldes.com.
