ÅLHULT Table Assembly Instructions

By IKEA

General Information and Tools

Before starting assembly, ensure you have the necessary tools and space. It is recommended to have two people for assembly.

Tools required:

Phillips head screwdriver [screwdriver]
Flat head screwdriver [screwdriver]

Assembly Tips:

Assemble on a soft surface like a rug to prevent scratches. [hand on rug]
Ensure parts are correctly oriented before fastening. [check symbol]
If you encounter issues, contact IKEA customer support. [phone symbol]

Parts List

Please verify you have all the parts listed below:

Allen key: 1x (Part No. 120202)
Threaded rod: 8x (Part No. 100033)
Screw: 12x (Part No. 111656)
Connector: 4x (Part No. 110912)
Corner bracket: 4x (Part No. 120171)
Dowel: 4x (Part No. 101350) - Note: 2 used in Step 1, 2 used in Step 4
Screw: 16x (Part No. 100325)
Nut: 8x (Part No. 100712)
Washer: 8x (Part No. 100843)
Foot/Base: 4x (Part No. 117559)
Screw: 12x (Part No. 112628)
Screw: 4x (Part No. 109067) - Used in Step 2 & 3

Assembly Steps

Step 1: Prepare Frame Pieces

Insert two wooden dowels (101350) into the pre-drilled holes on two long frame pieces. Ensure they are fully seated.

Step 2: Attach Corner Brackets

Attach four corner brackets (120171) to the frame pieces. Use four screws (109067) for each bracket, securing them to the frame. [hand symbol indicating placement]

Step 3: Connect Frame Sections

Continue assembling the frame sections. Insert screws (109067) into the designated holes to connect the parts. Ensure correct alignment; a crossed-out symbol [❌] indicates an incorrect connection.

Step 4: Assemble Main Table Frame

With assistance, lift and connect the frame sections. Secure the frame using twelve screws (112628). Insert the remaining two dowels (101350) into the frame as indicated.

Step 5: Prepare Legs

For each of the four legs: insert a connector (110912) into the top of the leg. Then, screw a threaded rod (100033) into the connector. Repeat for all four legs.

Step 6: Attach Legs to Frame

Position the prepared legs onto the assembled frame. Secure each leg using the corner brackets (100843, 100712) and the Allen key tool (120202). Ensure nuts and washers are used correctly.

Step 7: Attach Feet

Carefully position the table. Attach the four feet/bases (117559) to the bottom of each leg. Insert the component and secure it.

	ÅLHULT Table Assembly Instructions - IKEA Comprehensive guide for assembling the IKEA ÅLHULT table. Includes a detailed parts list, step-by-step instructions with visual descriptions, and necessary hardware information.
	IKEA ÅLHULT Chair Assembly Instructions Step-by-step assembly guide for the IKEA ÅLHULT chair, featuring parts list, tools, and clear visual instructions for home assembly.
	ÅLHULT Chair Assembly and Care Instructions - IKEA Detailed assembly and care instructions for the IKEA ÅLHULT chair, including step-by-step guidance and maintenance tips.
	ÅLHULT Extendable Table Assembly Instructions - IKEA Detailed step-by-step assembly guide for the IKEA ÅLHULT extendable table, including a complete parts list and visual descriptions of each assembly stage.
	ÅLHULT Extendable Table Assembly Instructions Step-by-step assembly guide for the IKEA ÅLHULT extendable table, including part identification and assembly sequence.
	TARSELE Extendable Table Assembly Instructions Comprehensive guide for assembling the IKEA TARSELE Extendable Table, detailing parts, tools, and step-by-step instructions for a secure and functional dining setup.
	SKANSNÄS Extendable Table Assembly Instructions \| IKEA Comprehensive assembly instructions for the IKEA SKANSNÄS extendable dining table. This guide provides a detailed overview of all parts, tools required, and step-by-step instructions for building your SKANSNÄS table.
	SKANSNÄS Extendable Dining Table Assembly Instructions \| IKEA Detailed assembly guide for the IKEA SKANSNÄS extendable dining table. Learn how to assemble your table step-by-step with clear instructions, part identification, and visual descriptions.