BroadLink HTS2 Sensor Accessory: Quick Start Guide

Introduction

This guide provides essential information for the setup and operation of the BroadLink HTS2 Sensor Accessory. This accessory is designed to work with the BroadLink RM4 Mini, enabling you to monitor temperature and humidity in your environment.

Overview

The HTS2 Sensor Accessory package includes:

• USB Cable
• Cable Tie
• Sensor Accessory

The sensor accessory measures approximately 1000±50mm in length.

Adding the Device

1. Connect the sensor accessory to the RM4 mini using the provided USB cable.
2. Power on the RM4 mini. If it's the first time use, it should enter smart configuration mode automatically. If not, you may need to reset the device.
3. Once in smart configuration mode, follow the on-screen instructions within the BroadLink App to add the device. You can then name the device and assign it to a specific room.
4. After the device is added, temperature and humidity data will be displayed automatically in the App.

Important Notices

This device is intended for indoor use only and should be kept in a dry environment.

Support and Information

For further assistance and product information, please visit the BroadLink website at www.ibroadlink.com or contact support via email at support@ibroadlink.com.

Global Hotlines are available 24/7, 5 days a week (Mon-Fri).

• North America: +1-40-4476-4482
• Europe: +33-4-81-68-12-80
• India & UAE: 1800-103-6262 (Toll Free)
• Other Asian Countries: +91-1800-103-6262
• Latin America: +55-11-4118-4618
• Australia & New Zealand: +61-2-4067-5400