BroadLink RM4 Pro Universal Remote Control / Control Unit
User Manual
Package Contents
- RM4 Pro x1
- Mounting Plate x1
- USB Cable x1
- User Manual x1
Visual Description of Components
Sensor Accessory Cable: A USB cable with an integrated sensor module. Total length: 1000±50mm.
USB Cable: Standard USB cable. Total length: 1000±50mm.
Mounting Plate: Circular plate with a central hole and two smaller holes for mounting. Dimensions: 22.4 x 29.6 x 4.7 mm.
Product Overview
Top View: Circular device with a central circular depression.
Base View: Circular device with a textured base and a central circular element.
LED Indicator: A small light on the device surface indicating status.
Reset Button: A small recessed button for resetting the device.
Power Input (Micro USB): A Micro USB port for power connection.
Indicator Description
- Flashing rapidly (5 times/second): The unit is in smart configuration mode (waiting to be added).
- Flashing slowly and then off: The unit is being configured and added to the network.
- Flashing slowly and continuously: The device cannot connect to the network or is disconnected from the network.
- Flashes once: An IR or RF signal has been sent.
Reset for AP Configuration
When the device is in any state, press and hold the reset button with a pin for 5 seconds until the LED starts flashing. DO NOT hold it for more than 10 seconds, otherwise the device will enter smart configuration mode.
Reset for Smart Configuration
When the device is in any state, press and hold the reset button with a pin for 10 seconds until the LED starts flashing rapidly.
Troubleshooting
Cannot add a device to the app.
Ensure the Wi-Fi network operates on the 2.4 GHz band and the password does not contain more than 32 non-specific characters. Ensure there are not too many devices on the network (not more than 15, including phones, tablets, laptops).
Failed to learn code.
Please read the instructions before learning to identify the type of remote control and make the correct selection. When learning IR, briefly press the button on the remote control, while when learning RF, press and hold the button.
Cannot find my device in the Alexa and Google Home app.
Alexa and Google Home recognize slave devices (IR and RF devices) and not the universal remote control itself. Ensure IR and RF devices can be controlled from external networks in the BroadLink app before being detected by Alexa and Google Home.
How to use the HTS2 sensor cable?
If you purchased a product with a sensor cable and use it with a universal remote control, temperature and humidity data will automatically appear in the app when you add the universal remote control.
Important Notes
- Please select a suitable adapter with a 5V DC 1A output.
- For indoor use only in a dry environment.
- Keep the area around the device clean.
- The product supports frequencies 305~335MHz and 430~440MHz, but 305~335MHz is not available in some countries/regions. This includes USA, Canada, Australia, New Zealand, and all EU countries.
Simplified Declaration of Conformity
Manufacturer: Hangzhou BroadLink Technology Co., Ltd.
Address: Building C, 57 Jiang'er Road, Binjiang, Hangzhou, 310052, China
Product: Universal Remote Control / Control Unit
Model: RM4 PRO
Radio Frequency: 2412-2472MHz for 802.11b/g/n(HT20), 2422-2462MHz for 802.11n(HT40)
Maximum Radio Frequency Power: 4.32dBm
The product complies with Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC.
The declaration of conformity is available at: https://files.innpro.pl/BroadLink
Additional Product Information
Environmental Protection
Electronic waste marked with the European Union directive symbol must not be disposed of with other municipal waste. It is subject to separate collection and recycling at designated points. By ensuring their proper disposal, potential negative consequences for the environment and human health will be prevented. The used equipment collection system complies with local environmental regulations for waste disposal. Detailed information on this matter can be obtained from your municipality, the recycling plant, or the store where you purchased the product.
The product complies with the requirements of the so-called New Approach Directives of the European Union (EU), which deal with issues related to user safety, health protection, and environmental protection, identifying risks that must be detected and eliminated.
Li-Ion Battery
The device is equipped with a Li-Ion (lithium-ion) battery, which, due to its physical and chemical structure, ages over time and with use. The manufacturer specifies the maximum operating time of the device under laboratory conditions, where optimal operating conditions for the device prevail and the battery itself is new and fully charged. Actual operating time may differ from that stated in the offer and this is not a defect of the device but a characteristic of the product. To maintain maximum battery life, it is not recommended to discharge the battery below 3.18 volts or 15% of its total capacity. Lower values, such as 2.5 V for a single cell, will permanently damage it and this is not covered by the warranty. If you do not use the battery or the entire device for more than one month, charge the battery to 50% and periodically check the charge level every two months. Store the battery and device in a dry place, away from sunlight and negative temperatures.
LiPo Battery
The device is equipped with a Li-Ion (lithium-ion) battery, which, due to its physical and chemical structure, ages over time and with use. The manufacturer specifies the maximum operating time of the device under laboratory conditions, where optimal operating conditions for the device prevail and the battery itself is new and fully charged. Actual operating time may differ from that stated in the offer and this is not a defect of the device but a characteristic of the product. To maintain maximum battery life, it is not recommended to discharge the battery below 3.18 volts or 15% of its total capacity. Lower values, such as 2.5 V for a single cell, will permanently damage it and this is not covered by the warranty. If you do not use the battery or the entire device for more than one month, charge the battery to 50% and periodically check the charge level every two months. Store the battery and device in a dry place, away from sunlight and negative temperatures.
Maintenance
The product must be regularly maintained (cleaned) by the user or by specialized service centers at the user's expense. In the absence of information regarding necessary maintenance actions, cycles, or service in the user manual, the difference in the physical condition of the product from a physically new product should be regularly assessed, at least once a week. If any deviation is detected or observed, urgent maintenance (cleaning) or service measures must be taken.
Improper maintenance (cleaning) and reaction when an abnormal condition is detected can lead to permanent damage to the product. The guarantor is not responsible for damages resulting from negligence.
Precautions
- Check that the device contacts are clean before charging.
- Never leave the device unattended during use and charging.
- Ensure you can quickly disconnect the device from the power source in an emergency.
- Never expose the device to high temperatures.
- Charge the device in a dry and well-ventilated area, away from flammable materials, keeping a distance of at least 1 m from other objects.
- Never cover the device during charging.
- Never use a power supply, charging station, cables, etc. without the manufacturer's recommendation and approval.
- Take care of your property; the device is equipped with cells that are difficult to extinguish. Equip yourself with a fire blanket.
Detailed information on the distributor/manufacturer's warranty terms is available at: https://serwis.innpro.pl/gwarancja.
