PDUMH30HVATNET: Single-Phase Switched Rack-Mount ATS PDU
Tripp Lite
The Tripp Lite PDUMH30HVATNET is a single-phase switched rack-mount Automatic Transfer Switch (ATS) Power Distribution Unit (PDU) designed to provide reliable, redundant power for IT equipment. It distributes 5-5.8kW of power and features automatic transfer switching, network control, and real-time load monitoring.
Key Features
- Distributes 5-5.8kW single-phase redundant power for devices with non-redundant power supply configurations.
- Automatic transfer switching within 2-6ms ensures continuous operation during primary power failures.
- Switched outlets and network interface support individual outlet control on a real-time or programmable basis.
- Digital load meter offers real-time output current monitoring.
Product Overview and Indicators
The unit supports high voltage input/output [AC Power] and features an automatic transfer switch [Automatic Transfer Switch]. It provides 19 switched outlets [Switched Outlets], with a load capacity of 5/5.8kW [5/5.8kW Capacity]. The PDU includes a network interface [Network Interface] and is designed for 2U horizontal rack-mount [2U Rack-Mount] installation. It is equipped with 2 L6-30P plugs [L6-30P Plugs] for input power.
Component Identification
Key components and ports are identified as follows:
- A: Load Bank 1
- B: Load Bank 2
- C: L6-30R Outlet
- D: Cable Retention Brackets
- E: Primary Input Cord with L6-30P Plug
- F: Secondary Input Cord with L6-30P Plug
- G: Network Interface
- H: RJ45 Jack
- I: Manual Configuration Port
- J: ENVIROSENSE Port
- K: SNMP Reset Button
- L: Digital Load Meter
- M: Circuit Breaker - Bank 1
- N: Circuit Breaker - Bank 2
- O: Mounting Ears
The unit also includes an Owner's Manual and Cable Ties.
Diagram Descriptions and Dimensions
Front View
The front panel displays the network interface, digital load meter, circuit breakers for Bank 1 and Bank 2, and the 19 outlets (16 x C13, 2 x C19, 1 x L6-30R). Mounting ears are also visible for rack installation. Indicators for STATUS, LINK, CONFIG, and ENVIROSENSE are present.
Dimensions shown for the front view indicate a width of approximately 18.20 inches (462.826 mm) and a height of 3.41 inches (86.70 mm).
Rear View
The rear panel features two NEMA L6-30P input connectors, an RJ45 network jack, a manual configuration port, an ENVIROSENSE port, and an SNMP reset button. Cable retention brackets are also located on the rear.
Dimensions shown for the rear view indicate a depth of approximately 12.23 inches (310.58 mm) and a height of 3.41 inches (86.70 mm).
Side View
The side view illustrates the unit's profile. Dimensions indicate a height of 3.41 inches (86.70 mm), a width of 2.75 inches (69.85 mm), and a depth of 12.23 inches (310.58 mm).
Top View
The top view shows the unit's overall dimensions. The width is approximately 18.66 inches (473.88 mm), and the depth is approximately 12.23 inches (310.58 mm).
Specifications
| Feature | Specification |
|---|---|
| Model | PDUMH30HVATNET |
| Voltage | 208/240V (Single-Phase Input/Output) |
| Frequency | 50/60 Hz |
| Load Capacity | 5.8kW (240V), 5kW (208V) |
| Input Connector | NEMA L6-30P (x2) |
| Cord Length | 10 ft. / 3 m |
| Outlets | 19 (16 x C13, 2 x C19, 1 x L6-30R) |
| Primary Mounting Option | 2U Horizontal |
| Unit Dimensions (H x W x D) | 3.41 x 17.26 x 12.23 in. / 87 x 438 x 311 mm |
| Unit Weight | 13.7 lb. / 6.2 kg |
| Standards | Tested to UL 60950-1 (US & Canada), NOM (Mexico), FCC Class A; RoHS; TAA |
Certifications
The unit is [NOM Certified] and [RoHS Compliant].
