Paulmann Katla LED Wall Luminaire
Installation and Safety Instructions
Product Identification
Brand: Paulmann
Article Numbers: 795.13, 795.14
Model Designation: Katla LED Wall Luminaire
Energy Efficiency Class: F (as indicated on label)
Certifications: CE, UKCA
Additional Information: (+MA326) PSU 10/21
For more information on symbols, visit: www.paulmann.com/symbols
Safety Instructions
Please follow all safety instructions. Key instructions are numbered: 1, 2, 3, 4, 5, 6, 7, 10, 12, 14, 15, 16, 19, 20, 21, 22, 24, 28, 33, 34.
Specific safety notes are referenced in installation steps (e.g., "Safety Instructions Nr. 1, 4, 5 off", "Nr. 3,4,5,6").
Included Components
- LED Luminaire
- Mounting Bracket
- Screws
- Wall Plugs
- Wire Connectors
- Power Supply Unit (PSU)
Installation Steps
The installation involves mounting the bracket, connecting electrical wiring, and attaching the luminaire.
Step 1: Mounting the Bracket
Attach the mounting bracket to the wall using the provided screws and wall plugs. Ensure secure fitting.
Diagram Description: Shows the mounting bracket being affixed to a wall surface with screws and wall plugs.
Step 2: Electrical Connections
Connect the luminaire's wiring to the power supply unit and the mains electrical supply. This typically involves connecting the Live (L), Neutral (N), and Earth wires using the provided connectors.
Diagram Description: Illustrates the connection of wires (Live, Neutral, Earth) to the power supply unit and mains wiring using connectors. A 230V connection is specified.
Measurements: Specific dimensions of 7 mm and 14 mm are indicated, likely for alignment or component placement.
Step 3: Attaching the Luminaire
Slide the luminaire onto the mounted bracket. Secure the luminaire in place, typically by tightening screws.
Diagram Description: Shows the luminaire being slid onto the mounting bracket and then secured with screws using a screwdriver.
Step 4: Final Assembly
Ensure all connections are secure and the luminaire is properly mounted.
Diagram Description: Depicts the fully installed and secured luminaire on the wall.
Product Information: Energy Efficiency and Replaceability
This product contains a light source with a specific energy efficiency class (indicated on the packaging and energy label).
Replaceability of Components:
- The light source or operating device can be replaced by end users without causing permanent damage to the luminaire.
- The light source or operating device can be replaced by a qualified electrician without causing permanent damage to the luminaire.
- If the light source or operating device is not replaceable, the entire luminaire must be replaced.
Note: Specific components (1-6) refer to different scenarios of replaceability as detailed in the original documentation.
