Inventum STK01W Stacking Kit

This diagram illustrates the assembly of the main frame (labeled B). It shows how parts labeled A and C are attached to frame B using screws (also labeled A). A warning symbol ⚠️ is displayed with the text: 'Torque should not exceed 5 N.m.'

This diagram shows a hand wiping the top surface of a washing machine (labeled 'Washer'). The instruction is: 'Clean the top cover of washer.'

This diagram shows the frame with red arrows indicating where to place stickers. A '3M' logo is visible on the stickers. A warning symbol ⚠️ is shown with the text: 'Please note, remove the backing of the stickers.'

This diagram shows the top of the washing machine (labeled 'Washer') and the stacking bracket (labeled B) being placed on it. A magnified view shows the alignment of bracket B with the washing machine's edge and the placement of stickers on the underside of bracket B. The note reads: 'Note: Align the bracket B and the washing machine before sticking the bracket B with the stickers on the bottom of the bracket.'

This diagram shows a dryer (labeled 'Dryer') and a close-up of its adjustable feet. The text indicates: 'If the dryer base is not metal, adjust the adjusting feet of the dryer to the lowest position directly.'

This diagram shows the rear and front of the dryer, with a close-up of the front adjustable feet. It details the process for a metal dryer base:

1. Unscrew the two front adjustment feet of the dryer downwards.
2. Insert the two fixing parts D.
3. Tighten the two adjustment feet upwards.

This diagram uses silhouette figures to show a person placing a dryer on top of a washing machine. The dryer is positioned at the back of the washer's top surface and then pushed forward until the holes align. The text reads: 'Place the dryer at the back of the top of the washer and then push the dryer forward until the hole matches the hole.'

This diagram shows the stacked washer and dryer, with a close-up view of the connection points on the back of the washer and front of the dryer. It indicates securing the units with screws labeled G. The text states: 'If the dryer base is not metal, tighten the front and rear four screws G.'

This diagram shows the stacked washer and dryer, with a close-up view of the connection points. It indicates securing the units with screws labeled A. The text states: 'If the dryer base is metal, only tighten the front two screws A.'

This diagram shows the stacked washer and dryer, with labels E and F pointing to connection points or parts of the bracket and appliances, indicating the final assembly stage. Ensure all connections are secure and the stacked units are stable. The installation is now complete.