KÄGELKAKTUS Curtain Rod Set
This document provides assembly instructions for the KÄGELKAKTUS curtain rod set from IKEA. Please read all instructions carefully before beginning assembly.
Important Information
Different wall materials require different types of screws. Choose screws that are specially suited to the material in your wall.
The following languages are available for this product's instructions:
- English
- German
- French
- Dutch
- Danish
- Icelandic
- Norwegian
- Finnish
- Swedish
- Czech
- Spanish
- Italian
- Hungarian
- Polish
- Estonian
- Latvian
- Lithuanian
- Portuguese
- Romanian
- Slovak
- Bulgarian
- Croatian
- Greek
- Russian
- Ukrainian
- Serbian
- Slovenian
- Turkish
- Chinese (Simplified)
- Chinese (Traditional)
- Korean
- Japanese
- Indonesian
- Malay
- Arabic
- Thai
- Vietnamese
Tools Required
You may need the following tools for assembly:
- Screwdriver
- Spirit level
- Pencil
- Measuring tape
Parts Included
Please check that you have all the parts before starting:
- 3x Brackets (Part number: 10096482)
- 3x Rod ends
- 3x Screws (Part number: 10048812)
- 3x Screws (Part number: 10096240)
- 3x Screws (Part number: 10048812)
- 3x Screws (Part number: 10096240)
- 2x End caps
Assembly Steps
- Step 1: Position the brackets on the wall. Use a spirit level to ensure they are aligned. Mark the screw positions with a pencil.
- Step 2: Secure the brackets to the wall using appropriate screws for your wall material. Ensure the brackets are firmly attached.
- Step 3: Slide the brackets onto the wall-mounted brackets.
- Step 4: Attach the rod ends to the curtain rod.
- Step 5: Insert the curtain rod into the brackets.
- Step 6: Adjust the position of the rod by sliding it within the brackets.
- Step 7: Secure the rod in place using the provided screws.
- Step 8: Attach the end caps to the ends of the curtain rod.
Maximum load capacity: 5 kg (11 lb)
Important: Ensure proper disposal of packaging materials according to local regulations.
