VIKARN Shower Curtain Rod
Important Information
As wall materials vary, screws for fixing to wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
Product Components
The VIKARN shower curtain rod system includes the following components:
- 2 x Long rods
- 1 x Short rod
- 2 x Screws (Part 110548)
- 2 x Curved connectors
- 1 x Straight connector
- 2 x End caps/bases (Type A)
- 2 x End caps/bases (Type B)
Installation Configurations
The VIKARN rod can be configured in several ways:
- Corner Setup: Two rods forming an L-shape. Visual: Two rods bent at a right angle, mounted to adjacent walls. Dimensions shown are 90 cm (35 1/2") for each rod section.
- Straight Setup: A single rod. Visual: A single straight rod mounted between two parallel walls or points. Dimension shown is 160 cm (63").
- U-Shape Setup: Two rods forming a U-shape. Visual: Two rods bent at right angles and connected to form a U-shape, mounted to three points on a wall or corner. Dimensions shown are 90 cm (35 1/2") for each rod section.
Installation Steps
Step 1: Mounting Brackets
Mark two points on the wall for bracket placement. Use a spirit level ? to ensure the points are horizontally aligned. The typical distance between mounting points is approximately 88.7 cm (35"). Secure the two wall brackets to the wall using appropriate screws (not included).
Step 2: Attaching Rods to Brackets
Insert the end of a rod into the wall bracket. Push the rod firmly until it is securely seated. A click sound ✔️ indicates proper attachment.
Step 3: Connecting Rods
If creating a longer or shaped rod, use the provided connectors. Slide the straight connector into the end of one rod section, then insert the next rod section into the other end of the connector. Ensure a snug fit.
Step 4: Final Assembly and Adjustments
Assemble the rod sections as per your desired configuration using the connectors. Attach the assembled rod(s) to the wall brackets, ensuring each section clicks securely into place. Specific U-shaped configurations may require bracket placements such as 88.7 cm (35") x 88.7 cm (35") or 87 cm (34.25") x 87 cm (34.25").