VIKARN Shower Curtain Rod
IKEA
Important Information
⚠️ As wall materials vary, screws for fixing to the wall are not included with this product. For advice on suitable screw systems for your specific wall type, please contact your local specialized hardware dealer. This information is provided in multiple languages in the original document.
Parts List
- 2x Long Rod
- 1x Short Rod
- 2x Curved Connector Piece
- 1x Straight Connector Piece
- 2x Circular Base Plate
- 2x Cylindrical Mounting Bracket
- 2x Screw (part number 110548)
Possible Configurations and Dimensions
L-Shape (Corner Mount)
Can be configured using two rods of 88.7 cm (35") each, forming a corner installation. The total span might be up to 158 cm (62.2").
L-Shape (Standard)
Can be configured using two rods of 90 cm (35 1/2") each.
U-Shape (Corner Mount)
Can be configured using two rods of 88.7 cm (35") and one rod of 87 cm (34.25") for a corner installation.
U-Shape (Standard)
Can be configured using three rods of 90 cm (35 1/2") each.
Straight Rod
Can be used as a single rod of 160 cm (63").
Assembly Instructions
Tools Required (Not Included)
[Screwdriver symbol] Screwdriver, [Pencil symbol] Pencil, [Spirit Level symbol] Spirit Level.
Step 1: Planning and Marking
Determine the desired configuration (e.g., straight, L-shape, U-shape). For corner installations, measure and mark the distances from the corner (e.g., 88.7 cm / 35" for L-shape, or 88.7 cm / 35" and 87 cm / 34.25" for U-shape). Use a spirit level to ensure accurate horizontal placement of mounting points.
Step 2: Install Wall Mounts
Attach the two cylindrical mounting brackets to the wall at the marked positions using appropriate screws and wall plugs (not included). Ensure they are securely fastened.
Step 3: Attach Base Plates
Attach the two circular base plates onto the installed cylindrical mounting brackets.
Step 4: Insert Rods
Insert the rods into the base plates. A "CLICK!" sound indicates a secure connection. The diagrams show two rods of 2x and one rod of 1x being used in various configurations.
Step 5: Connect Rod Sections (for longer configurations)
If assembling a longer rod or a specific shape (e.g., U-shape), use the provided straight and curved connector pieces. Insert the connector into the ends of the rods and push them together until they click into place.
Step 6: Final Assembly
Complete the assembly by connecting all necessary rod sections and ensuring all connections are secure.
