CARRY-BIKE

Step 10: Securing Lower Brackets

To fix the lower brackets, pull down the structure. Ensure the Carry-Bike fastening is steady and firm.

Diagram Description: Illustration shows a vehicle rear, a bike carrier structure being pulled down, and components labeled V, Y1, K, P, U. A close-up shows a bracket being secured with a screw. A measurement of "2 mm" is indicated.

Step 11: Attaching Bikes

Illustrations show the process of attaching bikes to the carrier using components labeled L, H, G. Clamps for different tube diameters (Ø 30 mm and Ø 35 mm) are shown.

Product Identification and Support

Product Identification: FP: 999999, Carry-Bike®, S/N: N 2000001, M00.

In case of problems, please contact your local dealer and provide the data from the nameplate.

Safety Guidelines and Specifications

Capacity: 4 bikes, 15 kg per bike (total 60 kg). Maximum speed: 130 Km/h.

Clearance Angles: Observe recommended angles for vehicle clearance: 30° for front/rear approach, 15° for side approach, 45° for departure.

Diagram Descriptions:

• Illustration showing maximum load limits for bikes and vehicle speed.
• Diagram indicating correct and incorrect bike placement on the carrier, with a 'OK' symbol for correct placement and 'X' symbols for incorrect placement.
• Visuals demonstrating vehicle clearance angles (30°, 45°, 15°) relative to the bike carrier.
• Thumbs-up symbol indicating correct carrier attachment, and a warning symbol with 'X' indicating incorrect attachment.

General Usage and Safety Precautions

Read installation instructions carefully. Failure to comply may cause damage and void manufacturer responsibility. Ensure vehicle structure/tailgate is strong enough for mounting points. Do not exceed maximum load per axle or vehicle weight limits. Distribute weight evenly, placing heavier bikes closer to the vehicle. Signal the carrier if it extends beyond vehicle dimensions. Use additional mirrors if rear visibility is reduced. Adapt driving style, especially when reversing, and be mindful of parking assistance systems. Adhere to speed limits and traffic laws. Check trailer hitch for clearance if towing a trailer. Regularly inspect all fixing elements, especially after initial kilometers and before long journeys. Replace worn rubber parts or straps immediately. Ensure clamps do not move laterally or contact the vehicle roof or tailgate hinges. Do not close the tailgate if lower brackets are not securely fastened. Check that the carrier does not interfere with the tailgate opening mechanism or roof structures. Ensure sufficient clearance between bikes and vehicle windows to prevent damage. Remove bike accessories like child seats or baskets, as they may detach due to vibrations. Be aware that bikes may obstruct the rear wiper; check its range before activation. The bike cover cannot be used with this Carry-Bike model.

Available Accessories

• RAIL QUICK PRO (Item No. 98656-993) - 128 cm
• RAIL PREMIUM S (Item No. 98656M133) - 128 cm
• RAIL PREMIUM (Item No. 98656M131) - 128 cm
• BIKE-BLOCK PRO D
• BIKE-BLOCK PRO S D
• BIKE-BLOCK PRO S
• BIKE FRAME ADAPTER (Item No. 06602-01-)
• PLASTIC SIGNAL (Item No. 98782-005) - 50 cm x 50 cm
• ALU SIGNAL (Item No. 98782-010) - 50 cm x 50 cm
• CABLE-LOCK (Item No. 98656-338) - L 250 cm
• LICENCE PLATE CARRIER (Item No. 06146B01-) - Dimensions: 16.5 cm height, 123 cm/131 cm width, 7.5 cm depth.

Warranty Information

In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.