Power Dynamics BGB50 In-/Outdoor Active Speaker Set BT

Introduction

Congratulations on your purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit to benefit fully from all features.

Read this manual before using the unit. Follow the instructions to avoid voiding the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician to avoid electrical shock. Keep the manual for future reference.

Safety Precautions and Warnings

• Ask advice from a specialist before using the unit. A slight smell may occur upon first use, which is normal and will disappear.
• The unit contains voltage-carrying parts; do NOT open the housing.
• Do not place metal objects or pour liquids into the unit, as this may cause electrical shock and malfunction.
• Do not place the unit near heat sources (e.g., radiators) or on vibrating surfaces. Do not cover ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead and do not damage it. A faulty or damaged lead can cause electrical shock and malfunction.
• When unplugging, always pull the plug, never the lead.
• Do not plug or unplug with wet hands.
• If the plug or mains lead is damaged, it must be replaced by a qualified technician.
• If the unit is damaged such that internal parts are visible, do NOT plug it in or switch it on. Contact your dealer.
• To avoid fire and shock hazard, do not expose the unit to rain or moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• Unplug during thunderstorms or if the unit will not be used for a longer period. The rule is: unplug when not in use.
• If the unit has not been used for a long time, condensation may occur. Let it reach room temperature before switching on.
• Follow applicable guidelines to prevent accidents, especially in company environments.
• Do not repeatedly switch the unit on and off; this shortens its lifespan.
• Keep the unit out of the reach of children. Do not leave the unit unattended.
• Do not use cleaning sprays on switches; residues can cause dust and grease buildup. Seek specialist advice for malfunctions.
• Do not force controls.
• Keep the unit at least 60cm away from computers or TVs due to potential magnetic fields.
• If the product has a built-in lead-acid rechargeable battery, recharge it every 3 months if not used for extended periods to prevent permanent damage.
• If the unit has fallen, have it checked by a qualified technician before switching it on again.
• Do not use chemicals to clean the unit; use a dry cloth only, as chemicals can damage the finish.
• Keep away from electronic equipment that may cause interference.
• Use only original spares for repairs to avoid damage or dangerous radiation.
• Switch off the unit before unplugging. Unplug all leads and cables before moving the unit.
• Ensure the mains lead cannot be damaged by people walking on it. Check the mains lead for damage before every use.
• Check mains voltage compatibility (220-240Vac/50Hz) when traveling.
• Keep original packing material for safe transport.
• ⚡ This mark indicates high voltages that can cause an electric shock.
• ? This mark indicates important instructions that must be read and followed.
• The unit is CE certified. Do not make any changes to the unit, as this will invalidate the CE certificate and guarantee.
• NOTE: For normal operation, use the unit in rooms with temperatures between 5°C/41°F and 35°C/95°F.
• Dispose of electric products responsibly at recycling centers.
• Do not attempt self-repair; this voids the warranty. Do not modify the unit. Warranty is void for accidents, misuse, or failure to follow warnings. Power Dynamics is not responsible for personal injury or damages resulting from not following safety recommendations.

Overview

The speaker features a front-mounted driver and tweeter, with connection ports on the rear.

Components:

1. Power switch
2. DC Power connector
3. Speaker output connector for passive speaker
4. Aux input Jack
5. LED indicator

Connection

Connect the DC adapter to the speakers and then to a 110V~230V AC power outlet. Turn on the power switch. The status indicator LED will be red and blink rapidly. After approximately 10 seconds, the speaker will emit a tone, indicating it is ready.

Aux Connection

If there is no Bluetooth connection, you can use the aux input jack.

Connect BT-Device

To connect a Bluetooth device:

1. Enable the search function on the BT device you want to play music from. Refer to that device's operating instructions.
2. On your BT device, search for "Power Dynamics" and establish the connection.

If a password is required, you can enter "0000".

Attention: The BT range is approximately 10 meters without any barrier.

Technical Specifications

The specifications are typical. Actual values may vary slightly between units. Specifications are subject to change without prior notice.

The products conform to the following European Community Directives:

• Low Voltage (LVD) 2014/35/EU
• Electromagnetic Compatibility (EMC) 2014/30/EU
• Restriction of Hazardous Substances (RoHS) 2011/65/EU

CE Certified