Industrial Automation Solutions
BEA offers a comprehensive range of sensors for industrial automation, enhancing safety and efficiency across various applications.
Opening Sensors for Industrial Doors
BEA sensors utilize microwave and magnetic induction technology to detect people and vehicles in critical industrial environments.
Sensor Series
- FALCON: The high-performance motion detector.
- SPARROW: The basic industrial motion sensor.
- MAGIC SWITCH: The proximity contactless opening sensor.
- MATRIX: The 11-pin loop detector for reliable opening.
- Remote Control: Industrial remote control for various door applications.
FALCON
Description: A high-performance motion detector using microwave technology for precise opening detection with pedestrian and parallel cross-traffic filtering.
Features
- Unidirectional motion detection for optimized door closing and energy savings.
- Option to filter people and detect vehicles only.
- Capability to filter cross-traffic to avoid unwanted detection.
- Immunity and stability due to BEA planar antenna and digital signal treatment.
- IP65 housing for harsh environmental conditions.
Installation
- Simple plug-and-play installation.
- Adjustable parameters via remote control.
Application
- Big doors (up to 7 m): FALCON.
- Small doors (up to 3.5 m): FALCON XL.
- Industrial doors: Cold storage, high-speed doors.
- Explosion proof: FALCON EX.
- Explosion intrusion proof: PHOENIX EX.
Technical Specifications
| Technology | Microwave, 24.150 GHz |
| Detection mode | Motion |
| Tilt angles | 0° to 180° in elevation |
| Detection area | 4 m (W) x 2 m (D) (FALCON XL)@2.5 m; 4 m (W) x 5 m (D) (FALCON)@5 m |
| Supply voltage | 12 V to 24 V AC ±10%; 12 V to 24 V DC -10%/+30% |
| Power consumption | < 2 W |
| Dimensions | 127 mm (W) x 102 mm (H) x 96 mm (D) |
| Temperature range | -30°C to +60°C |
| Degree of protection | IP65 |
| Mounting height | 3.5 m to 7 m (FALCON); 2 m to 3.5 m (FALCON XL) |
Accessories
- Remote control accessory.
Diagram Description: Image shows industrial doors with a sensor detecting motion. Another image illustrates cross-traffic filtering.
SPARROW
Description: A microwave-based sensor designed to detect approaching people and vehicles, optimizing door operation with unidirectional detection.
Features
- Detects people and vehicles.
- Flexible rotation angle from -120° to +120°.
- Unidirectional motion detection for optimized door closing and energy savings.
- 10 detection areas available, ranging from 1 m (D) x 2 m (L) to 6 m (D) x 10 m (L).
Installation
- Mounting height up to 6 m.
- Simple plug-and-play installation.
- Parameter adjustment via remote control or push-buttons.
Application
- Motion sensor for all types of industrial doors.
Technical Specifications
| Technology | Microwave, 24.150 GHz |
| Detection mode | Motion |
| Tilt angles | 0° to 90° vertical; -120° to +120° lateral |
| Detection area | Max. 6 m x 10 m |
| Supply voltage | 12 V to 24 V AC ±10%; 12 V to 24 V DC -10%/+30% |
| Power consumption | < 2 W |
| Dimensions | 140 mm (W) x 55 mm (H) x 57mm (D) |
| Temperature range | -30°C to +60°C |
| Degree of protection | IP64 |
| Mounting height | 2 m to 6 m |
Accessories
- Remote control accessory.
Diagram Description: Images show flexible and wall mounting positions for the sensor.
MAGIC SWITCH
Description: A contactless alternative to manual activators, using microwave technology for hygienic applications.
Features
- Ideal hygienic solution for retail, pharmaceutical, chemical, and healthcare sectors.
- Efficient alternative to push-buttons and manual solutions.
- Immunity and stability via BEA planar antenna and digital signal treatment.
- Can be installed behind non-metallic materials for aesthetics and protection.
- Adjustable detection area from 10 to 50 cm.
- Supports Pulse mode/Toggle mode.
Installation
- Flush or concealed mounting.
- Mounting behind non-metallic surfaces is possible.
Application
- Retail, pharmaceutical, chemical, and healthcare sectors (e.g., operating theatres).
Technical Specifications
| Technology | Microwave, 24.150 GHz |
| Detection mode | Motion |
| Detection area | ±10 to 50 cm (movement towards sensor at 90°, adjustable) |
| Supply voltage | 12 V to 24 V AC ±10%; 12 V to 24 V DC -10%/+30% |
| Power consumption | < 1.2 W |
| Dimensions | 85 mm (L) x 85 mm (H) x 45 mm (W) |
| Temperature range | -20°C to +55°C |
| Degree of protection | IP52 |
Accessories
- Visible box MAGIC SWITCH IP65 accessory.
Diagram Description: Images depict a reliable opening in an industrial environment and flush or concealed mounting installations.
MATRIX
Description: An induction loop controller for detecting vehicles and metallic objects.
Features
- 4 frequency adjustments to avoid interferences.
- Defines motion direction on 2-channel loop controllers.
- ASB function for sensitivity to raised floor vehicles, trail tillers, or forklifts.
- Accurate, stable detection parameter adjustment.
Installation
- Available in one or two-channel versions (12-24V, 220V).
- Embeddable into most control boxes via standard connectors.
Application
- Industrial doors, parking barriers, and sliding gates.
- Supports 12-24V AC/DC & 220-240V AC/DC with single and dual channel versions.
Technical Specifications
| Technology | Inductive loop |
| Detection mode | Presence |
| Presence time | 1 minute to infinity |
| Supply voltage | MATRIX S&D 12-24: 12-24 V AC/DC ±10%; MATRIX S&D 220: 220-240 V AC ±10% |
| Power consumption | < 2.5 W |
| Dimensions | 77 mm (W) x 40 mm (H) x 75 mm (D) |
| Operating temperature | -30°C to +40°C |
| Degree of protection | IP40 |
Accessories
- Matrix Socket accessory.
Diagram Description: Images show vehicle detection and parking applications.
Remote Control
Description: A practical solution for opening doors, garage doors, gates, and barriers.
Features
- Robust design suitable for industrial environments.
- Control distance up to 100 m in open space.
- Unique rolling code activation.
- Multiple applications with programmable delay options.
- Supports up to 100 transmitters per receiver; transmitter codes can be removed.
- 4 programmable relays.
- Available in 1, 2, 3, or 4 button versions.
- Red LED indicator for transmission confirmation and battery status.
- Extended antenna option available.
Installation
- BEA 433MHz receiver easily installs in door/gate operators.
Application
- Ideal for industrial doors, garage doors, gates, and barriers.
Technical Specifications
| Frequency | 433 MHz |
| Emitted Radio Power | ≤ 7 dBm (Transmitter) |
| Current Consumption | 32 mA (Transmitter), 40 mA (Receiver) |
| Contact range | 1.0 A @ 30 V DC |
| Power supply | 3 V DC (CR 2032 3V battery*2); 9 V to 30 V DC/AC (Receiver) |
| Max No. of programmed units per receiver | 100 Transmitters |
| Operating temperature | -30°C to 70°C |
| Modulation | GFSK |
Image Description: Multiple remote control models (IDRC 433 K1-K4), receiver units (IDRC 433, IDC 433+), and an antenna (IDATN) are shown.
Safety Sensors for Industrial Doors
BEA sensors use active infrared and laser technology for reliable presence detection and high-precision safety.
Sensor Series
- LZR®-I100/I110: Safety sensor for people and door protection, up to 10 m.
- MILAN: Industrial presence sensor, up to 5 m.
- IXIO-S INDUS: Presence sensor with 2 active infrared curtains, up to 4 m.
LZR®-I100/I110
Description: A laser scanner based on time-of-flight technology, offering dynamic laser beam orientation for enhanced safety at door thresholds.
Features
- High safety with complete 3D detection in front of the door.
- Detects small objects.
- Variable depth of plane (up to 1 m) based on installation height.
- Easy installation and retrofit opportunities.
- Replaces traditional solutions like contact edges, light beams, and light grids.
- Available versions: LZR®-I100 (Max. 10 m x 10 m), LZR®-I110 (Max. 5 m x 5 m).
Installation
- 10 m cable provided.
- Automatic door dimension teach-in.
- Setup via universal remote control.
- Easy zone setup with 3 visible LASER beams.
Application
- Creates 2 virtual push buttons for door opening.
- Provides safety during opening and closing with 2 separate detection areas.
Technical Specifications
| Technology | Time-of-flight |
| Detection mode | Motion & Presence |
| Rotation angles on bracket | -5° to +5° (lockable) |
| Detection area | 9.9 m x 9.9 m (Max.) |
| Supply voltage | 10 V to 35 V DC @ sensor side |
| Power consumption | < 5 W |
| Dimensions | 125 mm (L) x 93 mm (D) x 70 mm (H) |
| Temperature range | -30°C to +60°C (if powered) |
| Degree of protection | IP65 |
| Vibrations | < 2 G |
Accessories
- Remote control accessory.
- LBA accessory.
Diagram Description: Images show sensors on rolling doors and a virtual push button concept.
MILAN
Description: An active infrared sensor using background analysis to prevent vehicle contact with doors.
Features
- Enhanced protection for vehicles and pedestrians.
- Two outputs for separate presence and motion detection.
- Improves door protection and reduces collision risks.
- 40 active infrared spotlights covering 3 m x 3 m at 5 m mounting height.
- Adjustable detection area and minimal target size.
Installation
- Easy plug-and-play installation.
- Immune to door vibrations and interferences.
- User-friendly adjustment with remote control and spot finder.
Application
- Accurate opening in confined rooms.
- Presence detection at the door for increased protection.
- Not recommended for cool or freezer rooms.
Technical Specifications
| Technology | Infrared |
| Detection mode | Motion & presence |
| Tilt angles | 15° to 45° |
| Detection area | 3 m x 3 m (5 lines x 8 spots) * (at 5 m mounting height) |
| Supply voltage | 12 V to 24 V AC ±10%; 12 V to 24 V DC -10%/+30% |
| Power consumption | < 2 W |
| Dimensions | 127 mm (P) x 102 mm (L) x 96 mm (H) |
| Temperature range | -30°C to +60°C |
| Degree of protection | IP65 |
| Mounting height | 2.5 m to 6 m ** (depending on target size/nature) |
Accessories
- Remote control accessory.
- Spotfinder accessory.
Diagram Description: Images show how to adjust the infrared field size and area monitoring.
IXIO-S INDUS
Description: An active infrared presence sensor based on background analysis for industrial doors.
Features
- Presence detection via 2 infrared curtains (3D safety), each with 24 light spots.
- Enhanced convenience and safety for pedestrians and vehicles.
- Reliable protection due to double presence curtain.
- Ideal for industrial doors up to 4 m high.
Installation
- Intuitive setup with LCD screen and/or BEA remote control.
- Graphic LCD screen with language selection.
- 4 visible red spots for simplified positioning of the safety curtain.
- Easy installation.
- Comes with a 10 m cable.
Application
- Presence detection for industrial doors.
Technical Specifications
| Technology | Infrared |
| Detection mode | Presence |
| Tilt angles | From -7° to +4° (adjustable) |
| Detection area | 3.5 m x 0.6 m (Width x depth)* (at 3.5 m mounting height) |
| Supply voltage | 12 V - 24 V AC ±10%; 12 V - 30 V DC -5%/+10% |
| LED signals | Red |
| Dimensions | 262 mm (L) x 55 mm (H) x 44 mm (W) |
| Temperature range | -25°C to +55°C |
| Degree of protection | IP54 |
| Mounting height | 2 m to 4 m |
Accessories
- Bracket accessory.
- Spotfinder accessory.
- Rain accessory.
- Ceiling accessory.
- Remote control accessory.
Diagram Description: Images show area detection (3 m x 0.6 m @ 3 m) and an LCD screen.
Combined Sensors for Industrial Doors
Combined sensors integrate activation and safety in a single housing, offering reliable opening detection and 3D presence curtains for enhanced user safety.
Sensor Series
- LZR®-WIDESCAN: Opening sensor, area surveillance, and safety for industrial doors.
- CONDOR: Combined sensor for automatic industrial doors up to 6 m.
- IXIO D01: Combined sensor for automatic industrial doors up to 4 m.
LZR®-WIDESCAN
Description: A laser scanner using time-of-flight technology, providing door opening, area surveillance, and safety functions.
Features
- 7 laser curtains for accurate distance measurement, size, and trajectory calculation.
- Rejects parallel traffic and filters pedestrians based on application.
- Unaffected by weather conditions (rain, snow, fog, reflecting surfaces).
- Configurable detection fields in three dimensions.
Installation
- Two visible spots on the floor for first curtain alignment.
- Intuitive configuration via LCD screen and/or BEA remote control.
- Central or lateral positioning options.
- Teach-in of detection zones (opening, presence, safety) via remote control.
- Plug & play.
Application
- Door opening, area surveillance, and safety for industrial doors.
Technical Specifications
| Technology | Time-of-flight (7 laser curtains) |
| Detection mode | Motion and presence |
| Supply voltage | 10 V to 35 V DC @ sensor terminal |
| Tilt angles on bracket | 10° to 5° |
| Rotation angles on bracket | -45° to +45° (lockable) |
| Power consumption | < 5 W |
| Dimensions | 200 mm (H) x 150 mm (W) x 100 mm (D) (approx.) |
| Temperature range | -30°C to +60°C (if powered) |
| Degree of protection | IP65 |
| Typ. Mounting height | 2 m to 6 m |
Accessories
- Remote control accessory.
Diagram Description: Images show door protection applications.
CONDOR
Description: Combines a microwave motion detector and an active infrared presence sensor for precise opening with traffic filtering.
Features
- Detects all vehicles in front of the door.
- Reduces collision risk and extends door lifespan.
- Accurate pedestrian/vehicle filtering and cross-traffic rejection via planar antenna.
- Decreases door timer, offering energy savings.
Installation
- Easy plug-and-play installation.
- Flexible operation with remote control and spot finder.
Application
- High doors (up to 6 m): CONDOR.
- Small doors (up to 3.5 m): CONDOR XL.
Technical Specifications
| Technology | Microwave and infrared |
| Detection mode | Motion and presence |
| Tilt angles | -8° to 22° (radar); 15° to 45° (infrared) |
| Detection area | CONDOR: 3.5 m x 0.5 m; CONDOR XL: 4 m x 5 m (radar) / 4 m x 4 m (infrared) |
| Supply voltage | 12 V to 24 V AC ±10%; 12 V to 24 V DC -3%/+10% |
| Power consumption | < 3.5 W |
| Dimensions | 127 mm (L) x 102 mm (H) x 96 mm (W) |
| Temperature range | -30°C to +60°C |
| Degree of protection | IP65 |
Accessories
- Remote control accessory.
- Spotfinder accessory.
Diagram Description: Images show applications for all industrial doors and capability to filter pedestrian and cross traffic.
IXIO D01
Description: A sensor combining radar and active infrared technologies for detecting people and vehicles, ensuring presence detection.
Features
- Unidirectional sensor for faster door closing, improving energy efficiency, ideal for airlock applications.
- 4 visible spots for easy setup of the first safety curtain.
- 48 infrared spots across 2 curtains detect people and objects, preventing door contact.
- 32-bit microprocessor for optimized performance and stability.
- Intuitive setup via LCD screen with text and symbol display.
Installation
- Intuitive setup with LCD screen and/or BEA remote control.
- Graphic LCD screen with language selection.
- Lateral radar antenna orientation (-15° to +15°).
- 4 visible red spots for simplified safety curtain setup.
- Plug & play.
Application
- Motion and presence detection for industrial doors.
Technical Specifications
| Technology | Microwave and active infrared |
| Detection mode | Motion and presence |
| Tilt angle | 15° to 45° (radar); -7° to +4° (infrared) (adjustable) |
| Detection area | 4.5 m x 2.5 m (radar), 3.5 m x 0.5 m (infrared) |
| Supply voltage | 12 V - 24 V AC ±10%; 12 V - 30 V DC -5%/+10% |
| Power consumption | < 2 W |
| Dimensions | 269.3 mm (L) x 57.3 mm (H) x 57.9 mm (W) |
| Temperature range | -25°C to +55°C |
| Degree of protection | IP54 |
| Mounting height | 2 m to 4 m |
Accessories
- Bracket accessory.
- Rain accessory.
- Spotfinder accessory.
- Remote control accessory.
Diagram Description: Images show high-speed doors and industrial doors.
