Sensing Solutions for Automatic Gate Systems ??

BEA is a leading manufacturer of sensing solutions for automatic doors systems. The company was founded in 1965 and its headquarters are located in Liège, Belgium. BEA also has offices in the United States, Japan and China and its products can be found across the globe.

Industrial Door & Gate Sensors

Swinging and sliding gates provide access to numerous types of buildings, such as warehouses, offices, airports, and storage areas. Whether or not with controlled access, the main objective is to open and close gates quickly and safely. The safety sensors are used to prevent any undesired contact between vehicles or other users and the moving gate.

Barriers provide access to numerous types of buildings, such as car parks, sports facilities, warehouses, airports, and storage areas. Whether or not with controlled access, the main objective is to open and close barriers quickly and safely. The combined opening and safety sensors are used to activate the barrier opening for vehicles only and to prevent any undesired contact with vehicles or other users whilst the barrier is closing.

Smart, safe barrier activation and protection.

Our advanced sensors—laser and virtual loop—offer precise, flexible detection to activate barriers for vehicles only and minimize contact risks during closing. With easily adjustable zones and no need for roadworks, they ensure reliable safety for both vehicles and pedestrians.

Secure and protect gate areas with precision.

Our laser scanner sensors offer flexible, wide-area detection to prevent contact between gates and vehicles or pedestrians during opening and closing. Easily configurable to suit various gate types and sizes.

EVOLOOP

Induction loops & photocells replacement for automatic barriers

The EVOLOOP is the alternative to induction loops and photocells, replacing hard work with smart work. Thanks to the 140° field of view, you can configure up to 3 virtual loops independently to fit your application. The EVOLOOP can trigger not only opening and closing of the barrier, but also activate ticketing and license plate recognition systems. Moreover, it can protect both vehicles and pedestrians (EN 12453 type D), by reducing the risk of contact with the boom in all environments and conditions.

Technical Specifications

* External electrical sources must ensure double insulation from primary voltages. **When using AC supply, the maximum temperature is limited to 50°C.

Installation

• Plug & go ▶️, no more heavy and time-consuming road works.
• Can be installed on all types of barriers with skirt or hinged support.
• Position the field of view (-20° to +20°) without accessory.
• Automatic teach-in of the environment with preconfigured loops.
• Intuitive configuration of each virtual loop via app ?.
• Robust accessories to prevent tampering in sensitive environments.

Application

• Access Control: Secure entry points.
• Parking: Manage vehicle flow and payment.
• Toll Gates: Automate toll collection.

Plug & Go

No more dusty road works with noisy and heavy equipment. Enjoy an installer-friendly, clean and time-saving experience with EVOLOOP. Just mount the sensor, plug it and launch a teach-in. Ready to go!

In any weather, at any time ☀️?️❄️

The EVOLOOP can be installed in any weather all year round. The virtual loops are reliable and resistant in all environments and conditions, including challenging weather like fog, heavy rain, frost or snow.

Connect & Set ?

Via mobile app, start a simple teach-in and setup 2 preconfigured loops in no time. If needed, configure up to 3 virtual loops independently to fit the application's needs. Choose the loop type, target type and add a sense of direction to filter out cross-traffic.

Versatile Solution ⚙️

The EVOLOOP adapts to all applications. Whether you need to setup a paid parking system or need protection against collision with the boom, the EVOLOOP has it covered. It can be installed on all types of barriers, even with skirt or hinged support.

LZR®-H100

Opening & safety sensor for barriers

The LZR®-H100 offers a real alternative to induction loops: time gain during installation, detection of all types of vehicles and greater adaptability. This laser sensor for rising barriers is used to open, secure and/or detect a presence. It offers great flexibility in defining the width and depth of the detection zones (max detection field of 9.9m x 9.9m).

Technical Specifications

Installation

• Alternative to induction loops: installation and adjustment without heavy road works.
• Unrestricted, easy configuration of the detection fields.
• 3 visible laser beams to help positioning the detection areas.
• The sensor can be mounted on the left or right of the barrier.
• Automatic learning of the environment.

Application

Comfortable opening

All types of vehicles are detected in the opening field: passenger cars, electrical vehicles, vehicles made of composite materials, trucks with trailers. You can also define the vehicle's trajectory for targeted opening.

Pedestrian & cross-traffic filter

The barrier only opens when a vehicle is approaching. Pedestrians and parallel traffic in the opening field are screened.

Safety of its users ?️

The LZR®-H100 protects vehicles and people that are present in the safety field from contact with the boom (installation with reference point).

Easy installation ✅

Installation of the product without any impact on the surrounding ground and unrestricted and easy definition of the detection fields.

Specific Use Cases

• Double Access Lane: Manage traffic flow in both directions.
• Access Control: Secure entry points for authorized vehicles.

LZR®-1100

Safety sensor for industrial doors

The LZR®-1100 works according to the principle of time of flight. This high-precision technology and the dynamic orientation of the LASER beams on 4 planes offer optimal safety in the door threshold and its proximity. The sensor is adapted to industrial environments and has a max. detection range of 9.9m x 9.9m.

Technical Specifications

Installation

• Easy positioning of the detection field thanks to 3 visible LASER beams.
• Automatic teach-in of the door dimensions.
• Various settings via BEA's remote control.
• Cable of 10 m provided.

Application

Two separate detection areas

Safety at the opening and the closing of the door thanks to 2 separate detection areas.

Optimized for industrial environments

IP65, 10 m cable, filters door vibrations and environmental interferences.

Virtual opening buttons ?

Possibility to create 2 virtual push buttons to open the door.

Alternative ?

Replaces the current solutions such as contact edges, light beams and lightgrids.

Specific Use Cases

• Industrial doors: For all types of industrial door automation.
• On rolling doors: Ensures safety and efficient operation.
• On folding doors: Provides reliable detection for folding door systems.

Accessories

LZR® Housing Bracket

A robust bracket accessory designed for the LZR® sensors, ensuring secure and flexible mounting. It allows for precise positioning of the sensor, typically mounted on the side opposite to approaching traffic, horizontally as close to traffic as possible, and vertically below the barrier arm to avoid obstruction.

Remote Control ?

Universal remote control for the adjustments of BEA sensors. It provides access to various parameters for configuration and setup.

User Guides

Parameters

• AG External Monitoring / Test
• BE IR-Detection Field
• C Uncovered Zone
• DD Mounting Height / Frequency
• F1 Output Redirection
• F2 Door Control
• Detection Field Size
• Hold Time
• Detection Mode
• Radar Immunity Filter
• Output Configuration
• Max. Duration Of Presence Detection
• AIR-Immunity Filter
• LZR Laser Scanner Parameters:
• AG Field Dimensions - Optional - Width
• BE Field Dimensions - Optional - Height
• C Field Dimensions - Safety - Width
• DD Field Dimensions - Safety - Height
• F1 Detection Field Redirection
• F2 Uncovered Zone
• Object Size
• Output Activation Delay
• Active Curtains
• Mounting Side
• Output Configuration
• Immunity Filter

Colour Keys

• General Keys: Unlock, Lock, Check Value, Increase by 1, Decrease by 1, Setup/Teach-In Factory Values Presettings.
• Colour Keys: Flatscan, Widescan, Virtual Pull Cord, Safety, Safety, Movement, Reopening, Presence.

NOTES ?

This section is reserved for any additional notes or remarks regarding the products or the catalogue.

Contact Information

EDGE SMITH

New Zealand Crew

Email: ✉️ crew@edgesmith.co.nz

New Zealand HQ

Address: 20 Anvil Road, Silverdale, Auckland 0932

Phone: ? 09 427 4980

East Tamaki Branch

Address: 20 Kerwyn Avenue, East Tamaki, Auckland 2013

Phone: ? 09 777 7268

Christchurch Branch

Address: 4 Anchorage Road, Hornby South, Christchurch 8042

Phone: ? 03 662 9040

Australia Crew

Email: ✉️ crew@edgesmith.com.au

Australia HQ

Address: Unit 6/49 Bertie St, Port Melbourne VIC 3207

Phone: ? 0456 314 652

Brisbane Branch

Address: 55-57 Kabi Circuit, Deception Bay, Queensland 4508

Phone: ? 07 3707 6450