IXIO-DT1 Motion and Presence Sensor for Automatic Sliding Doors

Product Overview

The IXIO-DT1 is a sophisticated motion and presence sensor designed for automatic sliding doors. It utilizes advanced technology to ensure reliable and safe operation of door systems.

Key Features:

• Dual technology for motion and presence detection.
• Adjustable detection fields for optimal performance.
• Easy setup and configuration via LCD menu or remote control.
• Compatibility with various door control systems.

Description of Components

The sensor unit comprises several key components:

• 1. Cover: Protective housing for the internal components.
• 2. LED window: Visual indicator for sensor status.
• 3. Radar antenna: Detects motion.
• 4. AIR curtain width adjustment: Adjusts the width of the infrared safety field.
• 5. LCD: Liquid Crystal Display for settings and diagnostics.
• 6. AIR lenses: Focus the infrared beams for presence detection.
• 7. AIR curtain angle adjustment knob: Fine-tunes the angle of the infrared safety field.
• 8. Main adjustment knob: Primary control for various settings.
• 9. Main connector: For power and signal connections.

Accessories

Various accessories are available to enhance the functionality and mounting options of the IXIO-DT1:

• 10IMB Bracket accessory: For mounting the sensor.
• 10ICA Ceiling accessory: For ceiling installations.
• 10URA Universal rain accessory: Protects the sensor from weather elements.
• 35.1609: black cover, 35.1302: white cover, 35.1303: silver cover: Replacement covers.
• 10CDA Curved door accessory: For installation on curved door headers.
• 10IXIOSPACER Spacer: Used to adjust sensor positioning.

Installation and Safety Guidelines

Before Installation/Programming/Setup:

• Mount the sensor securely to avoid extreme vibrations.
• Do not cover the sensor.
• Avoid moving objects and direct light sources in the detection field.
• Avoid highly reflective objects in the infrared field.

Maintenance:

• Clean optical parts at least once a year, or more frequently if environmental conditions require it.
• Do not use aggressive cleaning products on the optical parts.

Safety Precautions:

• Ensure the door control unit and header cover profile are correctly grounded.
• Installation and setup should only be performed by trained and qualified personnel.
• Always test for proper operation after installation, following relevant standards (e.g., ANSI 156.10), before leaving the premises.
• Warranty is void if unauthorized repairs are attempted.

Compliance:

BEA, Inc. installation and service compliance expectations emphasize adherence to industry standards and regulations. Installers must perform risk assessments and safety inspections, ensuring compliance with local and international codes. Verification of appropriate signage and warning labels is crucial.

Technical Specifications

Technology / Performance

• Detection mode: Motion (min. speed 2 in/s), Presence (active infrared with background analysis).
• Technology: Microwave doppler radar.
• Transmitter frequency: 24.150 GHz.
• Mounting height: 6'6" - 11'6" (local regulations may apply).
• Sensor temperature range: -13°F to 131°F (-25°C to 55°C).
• Humidity: 0-95% relative humidity, non-condensing.
• Response time: < 200 ms (max 500 ms).
• Detection field: Spot: 2" x 2" (typ), max. 24 spots per curtain, 2 curtains.

Electrical Output

• Relay 1: Electromechanical relay (potential and polarity free), Max. contact current: 1A, Max. contact voltage: 30 VAC.
• Relay 2: Solid-state relay (potential and polarity free), Max. contact current: 100 mA, Max. contact voltage: 42 VDC / 30 VAC.
• Test/Monitoring Input: Sensitivity: Low < 1V, High > 10V (max 30V). Response time: typical < 5 ms.
• Supply voltage: 12-24 VAC ±10%, 12-30 VDC ±10% (SELV-compatible).
• Power consumption: < 2.5 W.
• Noise: < 70 dB.

Physical

• Degree of protection: IP54.

Compliance

• FCC certification: FCC: G9B-100606, IC: 4680A-100606.
• Compliance: ISO 13849 PL «c» CAT. 2 (requires door control system monitoring).

Using the LCD

The LCD display provides information and allows for configuration:

• Normal Function Display: Shows activation impulse, safety status, and negative display (active output).
• Factory Value vs. Saved Value: Compares default settings with user-configured settings.
• Navigating Menus: Access the menu by pushing the main knob. Enter password if required. Select language. Use the knobs to scroll and select options.
• Changing ZIP Code: Navigate to menu 3 (Diagnostics), select "ZIP code", and change as needed. Validate the last digit for activation.
• Value Check with Remote Control: Press parameter symbols on the remote to display values on the LCD. The green LED blinks indicate the setting count.

Mounting & Wiring

Mounting

Mount the sensor using the provided template, ensuring the bottom is within 2 inches of the door header. Refer to application notes for specific mounting requirements, such as using an IXIO Spacer.

Wiring:

* The sensor LED will briefly flash RED during monitoring communication, indicating that external monitoring is functional. Monitoring must be active on the sensor, door control, and monitoring wires must be properly connected.

Radar Opening Impulse Field

The detection field size varies with mounting height. Graphics represent field shapes and sizes:

• Angle: Adjustable from 15° to 45° (default 30°), or -15° to 15° (default 0°). Field size: 9, Immunity: 2.
• Width: Adjustable for 'Wide' or 'Narrow' field shapes. Field size: 9, Immunity: 2.

Note: 1x1 grid is approximately 3.28 ft x 3.28 ft.

Infrared Safety Field

Activate visible spots to verify the AIR curtain position. Visibility may vary based on conditions. Use Spotfinder if spots are not visible.

• Distance: The distance between inner curtains of inside and outside door sensors should be less than 8 inches.
• Width Adjustment: The arrow position on the sensor determines the detection field width. Adjust the AIR curtain angle (from -7° to 4°, default 0°) if necessary.
• Verification: Always verify the actual detection field width by walk-testing according to ANSI 156.10.

Setup

Sensor setup can be performed using push-buttons or the remote control.

• SETUP 1 (QUICK): Hold the knob for 2 seconds or use remote control buttons.
• SETUP 2 (ASSISTED): Test full door cycle + reference picture. Hold the knob for 4 seconds or use remote control buttons.

Important: Test proper operation before leaving the premises.

Overview of Settings

The sensor offers a comprehensive range of settings accessible via the LCD or remote control, including:

• RADAR Settings: Field size, immunity, direction, hold time, reentry.
• AIR Settings: Width, output, immunity, number of presence time, frequency.
• Test Settings: Enable/disable test mode.
• Redirection: Configure sensor output behavior.
• Factory Reset: Restore default settings.
• ZIP Code: Configure region-specific parameters.
• Diagnostics: View error logs, power supply status, operating time, and spot view.
• Password/Admin: Secure access to settings.

Notes on Settings:

• Note 1: Use a screwdriver for AIR adjustments.
• Note 2: Defines normally open (NO) and normally closed (NC) relay contacts, and energized/de-energized states.
• Note 3: External monitoring indication via RED LED flash. Ensure monitoring is active and wires are connected.
• Note 4: MTF (Motion Tracking Feature) and uni+reentry settings.
• Note 5: REDIRECTION settings (R1-MW, R2-IR).
• Note 6: Partial outputs are not reset.

LED Signals and Behaviors

• Green LED: Motion detection (flashes, flashes red-green, flashes quickly).
• Red LED: Presence detection (flashes x times, is off).

Troubleshooting

This section provides solutions for common issues:

• E1: ORANGE LED flashes 1x: Internal fault. Replace sensor.
• E2: ORANGE LED flashes 2x: Low/high power supply. Check voltage in diagnostics menu.
• E4: ORANGE LED flashes 4x: Insufficient AIR energy. Decrease AIR curtain angle.
• E5: ORANGE LED flashes 5x: Excessive AIR energy. Increase AIR immunity filter.
• E8: ORANGE LED flashes 8x: Sensor disturbed by external elements. Eliminate sources of disturbance.
• ORANGE LED is on: AIR power emitter faulty. Replace sensor.
• RED LED flashes quickly (after setup): Move AIR curtains away from door, install sensor closer, use bracket assembly, or ensure bottom is within 2" of header.
• RED LED illuminates sporadically: Sensor vibrates. Check security. Check cable/cover position. Adjust AIR angle or launch assisted setup.
• GREEN LED illuminates sporadically: Sensor disturbed by rain/leaves. Increase radar immunity filter. Ghosting from door movement. Change radar field angle. Sensor vibrates. Check security. Sensor sees door/objects. Check cable/cover position. Change radar field size/angle/immunity.
• LED and LCD displays are off: No power. Check wiring and power supply.
• Door reaction incorrect: Incorrect output configuration/wiring. Check wiring and output settings.
• Cannot access LCD/remote: Password protected. Enter correct password or reset power for 1-minute access.
• Sensor not responding to remote: Dead batteries. Replace batteries.
• RED Visible External Monitoring LED does not flash: Monitoring installation/setup error. Verify monitoring is ON in sensor settings.
• RED Visible External Monitoring LED flashes continuously: Sensor malfunction. Replace sensor. Wiring issue. Verify wiring.
• Door cycles open and remains open: Door control not set correctly. Set monitoring to Active Low. Safety/Motion output set incorrectly. Set output as required.

For further assistance, visit www.beainc.com or scan the QR code for Frequently Asked Questions.

Contact Information

BEA, Inc.

Tech Support & Customer Service: 1-800-523-2462

General Tech Questions: techservices-us@BEAsensors.com

Tech Docs: www.BEAsensors.com

BEA is a Halma company.