Please read these instructions before use. Do not discard: keep for future reference.
Product Overview
The Fellowes POWERSHRED 225Mi is a high-performance paper shredder designed for demanding office environments. It offers advanced features for security, efficiency, and ease of use.
Key Components and Controls
Key:
- A. SafeSense® Technology: Detects when hands touch the paper entry and stops shredding.
- B. Paper/card entry: Slot for shredding paper and credit cards.
- C. CD entry: Dedicated slot for shredding CDs and DVDs.
- D. Door: Access to the shredder's waste baskets.
- E. Basket (paper): Main bin for shredded paper.
- F. Basket (CD): Separate bin for shredded CDs/cards.
- G. Casters (4): Wheels for easy mobility.
- H. Disconnect power switch: Main power switch (ON/OFF).
- I. Safety Instructions: Reference to safety guidelines.
- J. Control Panel and LEDs: Buttons and indicators for operation.
- 1. Reverse: Reverses the shredding action.
- 2. ON/OFF: Powers the shredder on or off.
- 3. Forward: Advances the shredding action.
- 4. Auto: Automatically starts shredding when paper is inserted.
- 5. Door open (red): Indicates the cabinet door is not closed properly.
- 6. Bin full (red): Indicates the waste bin is full.
- 7. Remove paper (red): Indicates a paper jam or overload.
- 8. SafeSense® indicator (yellow): Indicates SafeSense® technology is active.
Capabilities
Will shred: Paper, credit cards, CD/DVD, staples, small paper clips, and junk mail.
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, folders, X-rays, or plastic other than noted above.
Paper shred size: Micro-Cut: 5/64 in. x 15/32 in. (2mm x 12mm)
Maximum Performance:
- Sheets per pass: 14*
- CDs/Cards per pass: 1*
- Paper entry width: 9 1/2 in. (240mm)
*Note: Performance based on 8.5"x11", 20lb. (75g) paper at 120V, 60 Hz, 6Amps. Heavier paper, humidity, or voltage variations may reduce capacity. Maximum recommended daily usage: 3,000 sheets; 200 cards; 10 CDs.
Fellowes SafeSense® shredders are designed for office environments ranging between 50-80°F (10-26°C) and 40-80% relative humidity.
⚠️ WARNING: IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
- Operation, maintenance, and service requirements are detailed in the full instruction manual. Read it entirely before operating.
- Keep away from children and pets. Keep hands away from the paper entry. Always set the power switch to OFF (❌) or unplug when not in use.
- Keep foreign objects (gloves, jewelry, clothing, hair, etc.) away from shredder openings. If an object enters the top opening, switch to Reverse (↩️) to back it out.
- Never use aerosol products, petroleum-based lubricants, or other flammable products on or near the shredder. Do not use canned air.
- Do not use if damaged or defective. Do not disassemble the shredder. Do not place near or over heat sources or water.
- The Disconnect Power Switch (H) must be in the ON (✔️) position for the shredder to operate. In case of emergency, move the switch to OFF (❌) to stop the shredder immediately.
- Avoid touching exposed cutting blades under the shredder head.
- Use only the designated entry for CDs/cards. Keep fingers away from the CD entry.
- Do not put foreign objects in the paper entry.
- The shredder must be plugged into a properly grounded wall outlet or socket matching the voltage and amperage designated on the label. The outlet must be near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used.
- ? FIRE HAZARD: Do NOT shred greeting cards with sound chips or batteries.
- For indoor use only.
- Unplug the shredder before cleaning or servicing.
Basic Shredding Operation
- Plug in the shredder and set the disconnect power switch (H) to the ON (✔️) position.
- Press the AUTO (▶) button on the control panel to activate the shredder.
- Feed paper or cards straight into the paper entry (B) and release.
- For CDs/cards, hold them at the edge and feed into the center of the CD entry (C).
- When finished shredding, set the disconnect power switch (H) to OFF (❌).
- The shredder will automatically enter sleep mode after 2 minutes of inactivity.
Advanced Product Features
Jam Proof System
Eliminates paper jams and powers through tough jobs. Advanced Jam Prevention electronically measures paper thickness to prevent jams:
- Up to RED: Too many sheets have been inserted.
- Up to YELLOW: Productivity is optimized.
- Up to GREEN: More sheets can be added.
If a misfeed occurs, all indicators light up, and the shredder pauses for 3-6 seconds for automatic correction. Wait for the flashing to stop before resuming regular shredding. If the indicator illuminates after reversing, press reverse again and remove paper.
SafeSense® Technology
Stops shredding immediately when hands touch the paper entry. To test:
- Turn the shredder ON (▶) to activate SafeSense®.
- Touch the test area near the paper entry.
- The SafeSense® indicator (?) should illuminate, confirming it is active and working properly.
- If a hand is held on the SafeSense® area for more than 3 seconds, the shredder will shut off.
Energy Savings System
Provides optimal energy efficiency 100% of the time, both in use and out of use. It saves energy through:
- Energy-efficient electronics.
- Jam prevention.
- Standby mode.
- Sleep mode: Shuts down the shredder after 2 minutes of inactivity.
To exit sleep mode, simply touch the control panel.
Product Maintenance
Cleaning Auto-Start Infrared Sensors
Paper detection sensors are designed for maintenance-free operation but can occasionally become blocked by paper dust. If the motor runs even without paper, clean the sensors:
- Turn off and unplug the shredder.
- Locate the auto-start infrared sensors in the center of the paper entry.
- Dip a cotton swab in rubbing alcohol.
- Gently wipe away any contamination from the sensors.
Oiling Shredder
All cross-cut shredders require oil for peak performance. Failure to oil can lead to diminished sheet capacity, intrusive noise, and eventual shutdown. It is recommended to oil the shredder each time the waste bin is emptied.
Oiling Procedure (Repeat Twice):
- Apply oil across the paper entry.
- Press and hold the Forward (➡️) button for 2-3 seconds.
CAUTION: Only use a non-aerosol vegetable oil in a long nozzle container, such as Fellowes 35250.
Troubleshooting
- Door Open Indicator (?): The shredder will not run if the cabinet door is open. Close the door to resume shredding.
- Bin Full Indicator (?): The waste bin is full and needs to be emptied. Use Fellowes waste bag 36054.
- Remove Paper Indicator (?): Press Reverse (↩️) and remove excess paper. Reduce the quantity of paper to be shredded.
- SafeSense® Indicator (?): If hands are too close to the paper entry, the indicator illuminates, and the shredder stops. If SafeSense® is active for 3 seconds, the shredder will automatically turn off. Press the power button on the control panel to resume shredding.
- Self Cleaning Cycle: The shredder periodically cycles in forward and reverse for 3-6 seconds.
Limited Product Warranty
Fellowes, Inc. warrants the parts of the machine to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. The cutting blades are warranted for 7 years.
Your sole and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product usage standards, operation using an improper power supply, or unauthorized repair. Fellowes reserves the right to charge for costs incurred for parts or services outside the country where the shredder was initially sold.
Any implied warranty, including merchantability or fitness for a particular purpose, is limited to the duration of this warranty. Fellowes shall not be liable for any consequential or incidental damages attributable to this product.
This warranty gives you specific legal rights. Its terms are valid worldwide, except where local law requires different limitations.
For more details or to obtain service under this warranty, please contact your dealer.
Questions or Concerns?
Visit the Support Section at www.fellowes.com for troubleshooting, registration, and manuals.
Customer Service & Support
- Troubleshooting
- Replacement parts
- General questions
Contact Numbers:
- Canada: +1-800-665-4339
- Mexico: +001-800-514-9057
- United States: +1-800-955-0959
Fellowes, Inc.
1789 Norwood Avenue, Itasca, Illinois 60143-1095 USA
630-893-1600
©2012 Fellowes, Inc. Part No. 406936 Rev B
