Jackery SolarSaga 200
Model: JS-200D
Technical Parameters
| Parameter | STC | BNPI |
|---|---|---|
| Product Name | SolarSaga 200 | |
| Model | JS-200D | |
| Peak Power (Pmax) | 200W±5% | 208W±5% |
| Open Circuit Voltage (Voc) | 24.8V±5% | 25V±5% |
| Short Circuit Current (Isc) | 11.2A±5% | 11.4A±5% |
| Power Voltage (Vmp) | 20V±5% | 20.2V±5% |
| Power Current (Imp) | 10A±5% | 10.3A±5% |
| Maximum System Voltage | 60V | |
| Maximum Reverse Current | 15A | |
| Protection Class Against Electric Shock | Class II | |
| Waterproof Level | IP68 | |
| Operating Temperature Range | -20°C~65°C (-4°F~149°F) | |
| Dimensions (unfolded) | 2340x552x25mm | |
| Dimensions (folded) | 615x552x40mm | |
| Weight | 6.2 kg±0.3 kg | |
| Bifaciality Coefficient (back/front) | Pmax>30%, Voc>95%, Isc>32% | |
| Voltage Temperature Coefficient | -0.268%/°C | |
| Power Temperature Coefficient | -0.29%/°C | |
| Conditions | STC (1000W/m², 25°C, AM 1.5). BNPI (Front 1000W/m², Rear 135W/m², 25°C, AM 1.5). |
Unfold the bracket and place it on a flat surface. The design load is 1600Pa, and the safety factor is 1.5 times.
Multifunctional Adapter
- USB-A Output: 5V-2.4A
- USB-C Output: 5V-3A
Safety Tips
- Please read the user guide first before using this product.
- Do not bend the folding solar panels.
- Do not place the folding solar panels in trees, buildings or other shaded areas for use.
- Do not immerse the folding solar panels in water or any other liquid.
- Do not put solar panels in water directly, and use a damp cloth to gently wipe them when cleaning.
- Do not use or store the folding solar panels near open flames or flammable materials.
- Do not scratch the folding solar panels with sharp objects.
- Do not put corrosive substances on the folding solar panels.
- Do not step on or place heavy objects on the folding solar panels.
- Do not disassemble the folding solar panels.
- The output circuit of folding solar panel package must be connected to the equipment properly, and reverse connection of positive and negative poles is strictly prohibited.
- Check the connection status of various components, wires, and plugs before use.
- It is strictly prohibited to drop the products due to the nature of the material. Otherwise, it may cause internal damage to the solar panel, rendering the product unusable.
- This product cannot be fixed for installation. Please put away the portable folding solar panels in case of strong winds, hail and other severe weather to avoid product damage or other hazards.
- Under normal circumstances, PV modules may be exposed to higher currents or voltages than under standard test conditions. Therefore, when calculating the rated voltage of component, the rated current of conductor, and the size of the control device connected to the PV output, it is required to multiply the short-circuit current (Isc) and open circuit voltage (Voc) values marked on the component by a factor of 1.25.
- Any damage to the product may lead to electric shock or fire.
- Do not let artificial spotlight shine directly on the solar modules or panels.
How to Use
Connecting the Cable
Connect the cable to the solar panel and the DC input port of the portable power station.
Tip: The cable comes with an adapter that allows it to connect to Jackery portable power station.
- DC8020 connector: suitable for the DC input port of Jackery portable power station (diameter: 8.1 mm).
- DC8020-DC7909 adapter: suitable for the DC input port of Jackery portable power station (diameter: 8.0 mm).
Using the Solar Panel Connector
Connect the two solar panels to the solar panel connector respectively and then connect the solar panel connector to the DC input port of the portable power station.
Sun Angle Indicator
The carry handle has a sun angle indicator. When sunlight hits its surface, a shadow will appear at its bottom.
If the shadow falls on the white inner circle at its bottom, it means that the solar panel is facing directly towards the sun and you can get optimal power generation; if not, it is suggested to adjust its angle until it does.
Diagram Description: The diagram shows a solar panel with sunlight hitting it. An indicator point on the handle casts a shadow. Two scenarios are shown: 1. The shadow falls within the white inner circle, indicating correct alignment for optimal power. 2. The shadow falls outside the white inner circle, indicating the need to adjust the panel's angle. This is represented by a checkmark [✔️] for the correct alignment and a cross [❌] for incorrect alignment.
Power Your Device
Connect the solar panel to charge your devices.
Diagram Description: The diagram shows the SolarSaga 200 connected via a multifunctional adapter to a Jackery portable power station. The power station is then shown connected to various devices: a cell phone, a power bank, and a tablet, indicating the solar panel's capability to power these devices.
Note: This multifunctional charging cable is only suitable for charging the Jackery SolarSaga 200 (JS-200D) and should not be used with other solar panels.
Warranty
The product is covered by a limited warranty from Jackery for the original purchaser, covering defects in workmanship and materials for 36 months from the date of purchase. Damages from normal wear and tear, alteration, misuse, neglect, accident, unauthorized service, or acts of God are not included.
During the warranty period, upon verification of defects, the product will be replaced when returned with proper proof of purchase.
2 Years Extended Warranty: To activate the Warranty Extension, register your product online or contact customer service at hello.eu@jackery.com.
Contact Us
For inquiries or comments, email hello.eu@jackery.com. For quality-related issues, request a replacement or refund via the form at www.jackery.com/support/.
Customer Service
- 3-year limited warranty
- Lifetime technical support
- Email: hello.eu@jackery.com
