Jackery SolarSaga 200 User Guide
Model: JS-200C
Technical Parameters
| Parameter | Value |
|---|---|
| Product Name | SolarSaga 200 |
| Model | JS-200C |
| Peak Power | 200W |
| Power Voltage | 18V |
| Power Current | 10 A |
| Open Circuit Voltage | 24.8V DC |
| Short Circuit Current | 11.2A |
| Operating Temperature Range | -20~65°C(-4~149°F) |
| Dimensions (unfolded) | 552x2340x25mm |
| Dimensions (folded) | 552x615x40mm |
| Waterproof Rate | IP68 |
| Product Weight | 6.4kg |
Safety Tips
- Do not bend or flex the folding solar panels.
- Minimize placement in shaded areas (e.g., under tree shades, near buildings) that obstruct sunlight.
- Do not immerse the solar panels in water or other liquids.
- Clean the solar panel gently with a damp cloth; do not use water.
- Keep away from open flames or flammable materials.
- Avoid scratching the surface of the solar panels with sharp objects.
- Prevent corrosive substances from contacting the solar panels.
- Do not step on or place heavy objects on the solar panels.
- Do not disassemble the solar panels.
- Ensure the output circuit of the solar panels is correctly connected to the equipment.
- Do not short-circuit the positive and negative poles of the panel.
- Ensure there is no gap between the connector and the insulated connector to prevent arcing or electrical shock.
- Carefully check the connection status of all components, including cables and plugs.
How to Use
Tips: This guide introduces the power cable equipped with a connector and adaptor to support the full range of Jackery portable power stations.
1. DC7909 Connector: Suitable for the 8.0 mm DC input port of Jackery portable power stations.
2. DC7909-DC8020 Adaptor: Suitable for the 8.1mm DC input port of Jackery portable power stations.
Connecting with DC7909 Connector
- Unzip the carrying bag to take out the charging cable.
- Unplug the adaptor from the power cable.
- Connect the charging cable to the solar panel and the DC input port of the portable power station.
[Diagram Description: A Jackery portable power station connected to a solar panel via a DC7909 connector.]
Connecting with DC7909-DC8020 Adaptor
- Unzip the carrying bag to take out the charging cable and plug it into the adaptor.
- Connect the charging cable to the solar panel(s) and the DC input port of the portable power station.
[Diagram Description: A Jackery portable power station connected to a solar panel via a DC7909-DC8020 adaptor.]
Using the Solar Generator Connector
- Unzip the carrying bag to take out the charging cable.
- Connect the two power cables to the two input ports of the solar generator connector.
- Plug the output port into the DC input port of the portable power station.
[Diagram Description: A Jackery portable power station connected to a solar generator connector, which is in turn connected to solar panels.]
Note: To maximize power generation efficiency, adjust the direction of the SolarSaga 200 to ensure it is exposed to direct sunlight.
Note: The SolarSaga solar generator connector may be an option or standard depending on the portable power station type. Consult the Jackery website and User Manual for details.
Warranty
The product is covered by a limited warranty from Jackery for the original purchaser. This warranty covers defects in workmanship and materials for 24 months from the date of purchase. It excludes damages from normal wear and tear, alteration, misuse, neglect, accident, service by unauthorized personnel, or acts of God.
During the warranty period, and upon verification of defects, this product will be replaced when returned with proper proof of purchase.
Frequently Asked Questions (FAQ)
Q: What kind of battery can be charged by these solar modules?
- Jackery Explorer series
- Sealed lead-acid battery
- Colloidal lead-acid batteries
- Open lead-acid batteries
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance.
Q: Are the foldable solar modules waterproof?
To maximize the lifespan of the module, it should not get wet.
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the device.
Contact Us
For any inquiries or comments concerning our products, please send an email to hello.eu@jackery.com, and we will respond as soon as possible.
If there is any quality-related issue with the product, you may request a replacement or refund by submitting a request form at www.jackery.com/support/.
