Jackery SolarSaga 100W Portable Solar Panel User Guide

Technical Specifications

Safety Tips

• Do not flex or bend the folding solar panels.
• Do not place folding solar panels in shading places; minimize obstructions like tree shades and buildings.
• Do not soak the solar panels in water or other liquid.
• Clean the solar panel with a damp cloth; do not use water directly.
• Do not use or store solar panels near open flames or flammable materials.
• Do not scratch the surface of solar panels with sharp objects.
• Prevent corrosive substances from damaging the solar panels.
• Do not step on or place heavy objects on the solar panels.
• Do not disassemble the solar panels.
• Ensure the output circuit of the solar panels is correctly connected to the equipment.
• Do not short-circuit the positive and negative poles. Ensure there is no gap between the connector and the insulated connector to prevent sparks or electrical shocks.
• Check the connection status of each component, including cables, wires, and plugs.

Warranty Information

The product is covered by a limited warranty from Jackery for the original purchaser, covering defects in workmanship and materials for 24 months from the date of purchase. This warranty excludes damages from normal wear and tear, alteration, misuse, neglect, accident, unauthorized service, or acts of God. During the warranty period, the product will be replaced upon verification of defects and return with proper proof of purchase.

Frequently Asked Questions (FAQ)

• Q: What kind of battery can be charged by these solar modules?

  A: The solar modules can charge the following types of batteries:

  1. Jackery Explorer series
  2. Sealed lead-acid battery
  3. Colloidal lead-acid batteries
  4. Open lead-acid batteries

• Q: How to clean the solar surface?

  A: First, remove dust and dirt from the surface using a soft brush. Then, use a damp cloth to wipe the solar module surface to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance.

• Q: Are the foldable solar modules waterproof?

  A: To maximize the lifespan of the module, it should not get wet.

Solar Panel Characteristics and Precautions

The power output of the solar panel varies with sunlight intensity and panel temperature. For maximum power generation, install the panel perpendicular to direct sunlight. Do not operate the panel if it is partially folded. Avoid shadows or obstructions on the panel surface, as this significantly reduces power generation. Keep the panel surface clean for optimal efficiency. The panel has no built-in storage function, and the generated current is DC.

Usage Method

The Jackery SolarSaga 100 can be connected to Jackery portable power stations. It features DC7909 ports and may include a DC7909-DC8020 adapter for compatibility with different Jackery power bank input ports.

Connecting to Jackery Portable Power Station 1000:

1. Take out the DC cable from the SolarSaga 100.
2. Connect the applicable port (DC7909 port) of the DC cable to the input port of the Power Station 1000.

Connecting Two SolarSaga 100 Units:

1. Take out the DC cable from the SolarSaga 100.
2. Connect the charging ports (DC7909 ports) of the two solar panel cables to the adapter.
3. Connect the solar adapter to the power bank for charging.

Note: This product does not support charging vehicle batteries.

Important Usage Precautions

• Read the manual carefully before use.
• Avoid prolonged exposure of the charging battery or power bank to direct sunlight. Store in a dry, shaded area.
• Do not use the cable if it is bent.
• Do not bend or fold the product; it may cause damage.
• Handle with care to avoid dropping or impact, which can cause damage.
• Do not puncture the product with nails or sharp objects, or strike it with a hammer.
• Keep the product away from fire, corrosive substances, or water.
• Do not disassemble or modify the product, as it may cause electric shock, fire, or accidents.
• Ensure the solar panel charging cable is securely connected. Loose connections can lead to overheating, dust accumulation, fire, or electric shock.