Taurus Fid Bench

Dear Customer

Thank you for choosing a high-quality fitness equipment from the Taurus® brand. Taurus® offers sports and fitness equipment for the sophisticated home sport and for fitness studios and business customers. With Taurus® fitness equipment, the focus is on what sport is all about: maximum performance! The equipment is developed in close consultation with athletes and sports scientists.

Further information can be found at www.sport-tiedje.com.

Intended Use

The equipment may only be used for its intended purpose. It is suitable only for home use and not for semi-professional (e.g., hospitals, associations, hotels, schools) or commercial/professional use (e.g., fitness studios).

Legal Notice

Sport-Tiedje GmbH
Europe's No. 1 for home fitness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany

Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547

Disclaimer

©2010 Taurus® is a registered brand of SportTiedje GmbH. All rights reserved. Use of this trademark without explicit written permission of SportTiedje is prohibited. Product and manual are subject to change. Technical data can be changed without advance notice.

About This Manual

Please read the entire manual before installation and first use. It will help you quickly set up the system and use it safely. Ensure all persons exercising with the equipment (especially children and persons with physical, sensory, mental, or motor disabilities) are informed about this manual. Responsible persons must supervise the use of the equipment if in doubt.

This equipment is manufactured according to the latest safety knowledge. Potential safety hazards have been eliminated where possible. Follow instructions carefully and ensure all parts are securely in place. Reread instructions to correct any mistakes.

Pay close attention to the safety and maintenance instructions. The contract partner cannot be held liable for damage to health, accidents, or equipment damage if not used according to instructions.

Safety Instructions

[ATTENTION] This notice indicates potentially hazardous situations which, if not avoided, may result in property damage.

[CAUTION] This notice indicates potentially hazardous situations which, if not avoided, may result in slight or minor injuries!

[WARNING] This notice indicates potentially hazardous situations which, if not avoided, may result in death or serious injuries!

[DANGER] This notice indicates potentially hazardous situations which, if not avoided, will result in death or serious injuries!

[NOTICE] This notice indicates further useful information.

Retain these instructions in a safe place for future reference, maintenance, or ordering replacement parts.

1 General Information

1.1 Technical Data

Weight and Dimensions:

• Article weight (gross, incl. packaging): 36.7 kg
• Article weight (net, excl. packaging): 30 kg
• Package dimensions (LxWxH): approx. 115 cm x 57 cm x 25.5 cm
• Set-up dimensions (LxWxH): approx. 138.3 cm x 56.8 cm x 49.7 cm
• Maximum load (user weight + weights): 400 kg

1.2 Personal Safety

[DANGER] Before starting, consult your physician to ensure this type of exercise is suitable for you. This is particularly important for persons with a hereditary disposition to high blood pressure or heart disease, those over 45, smokers, those with high cholesterol, the overweight, or those who have not exercised regularly in the past year. If you are under medical treatment affecting your heart rate, medical advice is essential.

Note that excessive training can seriously endanger your health. Heart rate monitoring systems can be inaccurate. If you notice any signs of weakness, nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising immediately and seek medical advice.

[WARNING]

• This equipment may not be used by children under the age of 14.
• Children should not be allowed unsupervised access to the equipment.
• Persons with disabilities must have a medical license and be under strict observation when using the equipment.
• The equipment is strictly for use by one person at a time.
• If your equipment has a safety key, attach the clip to your clothing before training. In case of a fall, the EMERGENCY STOP can be initiated.
• Keep hands, feet, body parts, hair, clothing, jewellery, and other objects clear of moving parts.
• During use, wear suitable sports clothing rather than loose or baggy clothing. Wear sports shoes with suitable, non-slip soles (preferably rubber). Shoes with heels, leather soles, studs, or spikes are unsuitable. Never exercise barefoot.

[CAUTION]

• If your equipment needs to be connected to the power supply with a mains cable, ensure the cable is not a tripping hazard.
• Ensure nobody is within the range of motion of the equipment during training to avoid endangering yourself or others.

[ATTENTION] Do not insert any objects of any kind into the openings of the device.

1.3 Set-Up Place

[WARNING] Do not place the equipment in main corridors or escape routes.

[CAUTION]

• Choose a location with enough free space/clearance to the front, rear, and sides of the equipment.
• The training room should be well-ventilated during training and not be exposed to draughts.
• The set-up and mounting surface should be flat, loadable, and solid.

[ATTENTION]

• The device may only be used in one building, in sufficiently tempered and dry rooms (ambient temperatures between 10°C and 35°C). Do not use outdoors or in rooms with high humidity (over 70%), like swimming pools.
• A floor protective mat/underlay can help protect floor coverings (parquet, laminate, cork, carpets) from dents and sweat and level out slight unevenness.

2 Assembly

2.1 General Instructions

[DANGER] Do not leave tools, packaging materials (foils, small parts) lying around, as this poses a suffocation risk to children. Keep children away from the equipment during assembly.

[WARNING] Pay attention to the attached instructions to reduce the risk of injuries.

[CAUTION]

• Ensure sufficient room for movement in each direction during assembly.
• Assembly must be carried out by at least two adults. If in doubt, seek help from a third technically skilled person.

[ATTENTION] To prevent damage to the equipment and the floor, assemble on a mat or packaging board.

[NOTICE] Some screws and nuts may be pre-assembled for simpler assembly. Ideally, assemble the equipment at its final set-up place.

2.2 Scope of Delivery

The scope of delivery includes the parts shown in the exploded drawing. Check that all parts and tools are included and that no damage has occurred. In case of complaints, contact the contractual partner directly.

[CAUTION] If parts are missing or damaged, assembly must not be carried out.

2.3 Assembly

Before assembly, carefully review the individual assembly steps and carry out the assembly in the given order.

[NOTICE] First loosely screw all parts together and check fit. Tighten screws using the tool only when instructed.

Step 1:

Attach the rear base (2) and the shaped base to the main frame (1).

Use the following:

• Two screws (11)
• Four washers (15)
• Two nuts (18)
• Two screws (13)
• Four washers (16)
• Two nuts (19)

Diagram Description: Shows the main frame (1) with the rear base (2) and shaped base (3) being attached using screws (11, 13), washers (15, 16), and nuts (18, 19).

Step 2:

1. Attach the seat pad support (4) to the main frame (1).
2. Attach the backrest frame (5) to the main frame (1).

Use the following:

• Three screws (10)
• Six washers (15)
• Three nuts (18)

Diagram Description: Shows the main frame (1) with the seat pad support (4) and backrest frame (5) being attached using screws (10), washers (15), and nuts (18). Components like the backrest frame support (6) are also visible.

Step 3:

1. Attach the headrest cushion (7) and the backrest cushion (8) to the backrest frame (5).
2. Attach the seat cushion (9) to the seat frame (4).

Use the following:

• Six screws (12)
• Six washers (16)

3. Fix the bolt (14), the two washers (17), and the nut (20) to the seat frame (4).

Diagram Description: Shows the attachment of the headrest cushion (7) and backrest cushion (8) to the backrest frame (5), and the seat cushion (9) to the seat frame (4), using screws (12) and washers (16). A bolt (14) with washers (17) and nut (20) is secured to the seat frame (4).

3 Storage and Transport

3.1 General Instructions

[WARNING] The storage location should prevent improper use by third parties or children. If your equipment lacks transportation wheels, it must be disassembled before transportation.

[ATTENTION] Ensure the equipment is protected from moisture, dust, and dirt in the selected storage location. The storage location should be dry, well-ventilated, and maintain a constant ambient temperature between 10°C and 35°C.

3.2 Transportation Wheels

[ATTENTION] If transporting over sensitive or soft floor coverings (e.g., parquet, planks, laminate), lay out the transport route with cardboard or similar to avoid floor damage.

1. Stand behind the equipment and lift it until the weight transfers to the transportation wheels. You can then easily move the equipment to a new position. For long transport distances, disassemble and safely pack the equipment.
2. Select the new location by following the instructions in section 1.3 of this manual.

4 Troubleshooting, Care and Maintenance

4.1 General Instructions

[WARNING] Do not make any improper changes to the equipment.

[CAUTION] Damaged or worn components may affect your safety and the equipment's lifespan. Immediately replace damaged or worn components. Contact the contract partner in such cases. The equipment must not be used until repaired. Use only original spare parts if necessary.

[ATTENTION] Additional service and/or repair work may be necessary beyond these instructions; this must only be carried out by authorized service technicians.

4.2 Faults and Fault Diagnosis

The equipment undergoes regular quality controls. However, faults or malfunctions may occur. Individual parts are often responsible for these disturbances, and an exchange is usually sufficient. Refer to the following overview for common errors and corrections. If the equipment still does not function properly, contact your contract partner.

4.3 Maintenance and Inspection Calendar

To avoid damage from body sweat, clean the equipment with a damp towel (no solvents!) after each training session.

The following routine tasks must be performed at specified intervals:

Legend: C = clean; I = inspect

5 Disposal

At the end of its operational life, this equipment cannot be disposed of in normal household waste. It must be disposed of via a recycling centre. Further information can be obtained from your local authority's recycling service.

Materials can be recycled as per their symbols. Through reuse, recycling, or recovery of old equipment, you contribute to environmental protection.

6 Recommended Accessories

To enhance your training experience, we recommend suitable accessories. A floor mat provides stability and protects the floor from sweat. Additional handrails or silicone spray for moving parts can also be beneficial.

For pulse training, a compatible chest strap is strongly recommended for optimum heart rate transmission. Additional grips or weights may be desired for multi-gyms.

Our accessories offer high quality. For more information on compatible accessories, visit the product's detail page on our webshop by entering the article number. You can also contact our customer service via telephone, email, in person at our branches, or through our social media channels.

Featured Accessories:

• Floor mat
• Chest strap
• Towels
• Chest strap contact gel
• Silicone spray

7 Ordering Spare Parts

7.1 Serial Number and Model Name

To ensure the best service, please have the model name, article number, serial number, exploded drawing, and parts list ready. Contact options are in chapter 10.

[NOTICE] The serial number of your equipment is unique and located on a white sticker.

Please enter the serial number in the appropriate field:

Serial number: [____________________]

Brand / Category: Taurus / Weight Bench

Model Name: Taurus Fid Bench

Article Number: TF-B930

7.2 Parts List

7.3 Exploded Drawing

The exploded drawing visually represents all components of the Taurus Fid Bench and their assembly order. It shows the main frame, rear base, shaped base, seat pad support, backrest frame, cushions, and various hardware like screws, washers, and nuts, illustrating how they connect to form the complete bench.

8 Warranty

Training equipment from Taurus® is subject to strict quality control. If purchased equipment does not work perfectly, please contact customer service. We are happy to help via our service hotline.

Error Descriptions

Your fitness equipment is developed for long-term, high-quality training. Should a problem arise, first read the operating instructions. For further assistance, contact your contract partner or call the service hotline. Describe the defect as exactly as possible for quick resolution.

In addition to statutory warranty, Taurus® provides a warranty for every fitness equipment purchased according to the following provisions. Your statutory rights are not affected.

Warrantee

The warrantee applies to the first/original buyer and/or any person who received the product as a gift from the original buyer.

Warranty Period

Warranty periods, shown on the web shop, begin on delivery of the fitness equipment. Respective warranty periods can be found on the product's website.

Repair Costs

Taurus® may choose to repair, replace individual damaged parts, or complete replacement. Spare parts that require mounting during assembly must be replaced by the warrantee personally and are not part of the repair service. After the warranty period for repair costs expires, a pure parts warranty applies, excluding repair, installation, and delivery costs.

Terms of Use:

• Home use: Solely for private use in private households up to 3 hours per day.
• Semi-professional use: Up to 6 hours per day (e.g., rehabilitation centres, hotels, clubs, company gyms).
• Professional use: More than 6 hours per day (e.g., commercial gyms).

Warranty Service

Within the warranty period, equipment faults due to material or manufacturing defects will be repaired or replaced at Taurus®'s discretion. Ownership of replaced equipment or parts transfers to Taurus®. The warranty period is not extended, nor does a new warranty period begin following repair or replacement.

Warranty Conditions

For the warranty to be valid, the following steps must be taken:

Contact customer service by email or phone. If the product needs to be sent for repair under warranty, the seller bears costs. After warranty expiry, the buyer bears transport and insurance costs. If the fault is covered by warranty, new or repaired equipment will be provided.

Warranty claims are invalid in case of damage resulting from:

• Misuse or improper handling
• Environmental influences (moisture, heat, electrical surge, dust, etc.)
• Failure to follow safety measures
• Failure to follow operating instructions
• Use of force (e.g., hitting, kicking, falling)
• Interventions not carried out by authorized service centres
• Unauthorized repair attempts

Proof of Purchase and Serial Number

Provide the appropriate receipt when claiming warranty. To identify your equipment and for quality control, provide the serial number when contacting the service team. Have your serial number and customer number ready when calling the service hotline for swift assistance.

If the serial number cannot be found, the service team can provide further information.

Service outside of the Warranty Period

Cost estimates can be provided for problems after warranty expiry or for cases not covered by warranty (e.g., normal wear and tear). Contact customer service for a quick and cost-effective solution. The customer is responsible for delivery costs in such cases.

Communication

Many problems can be solved by speaking to your specialist supplier. Taurus® aims to resolve queries quickly and simply for users, ensuring minimal interruption to workouts. Always keep your customer number and the serial number of the faulty equipment handy.

10 Contact

Germany (DE)

Technical Support: +49 4621 4210-900, +49 4621 4210-698, technik@sport-tiedje.de

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

Service: 0800 20 20277 (Freecall), info@sport-tiedje.de

Hours: Mon-Fri 08:00-21:00, Sat 09:00-21:00, Sun 10:00-18:00

Denmark (DK)

Technical Support & Service: 80 90 16 50, +49 4621 4210-945, info@fitshop.dk

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

France (FR)

Technical Support & Service: +33 (0) 172 770033, +49 4621 4210-933, service-france@fitshop.fr

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

Poland (PL)

Technical Support & Service: 22 307 43 21, +49 4621 42 10-948, info@fitshop.pl

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

Belgium (BE)

Technical Support & Service: 02 732 46 77, +49 4621 42 10-932, info@fitshop.be

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

United Kingdom (UK)

Technical Support: +44 141 876 3986, support@powerhousefitness.co.uk

Service: +44 141 876 3972, Mon-Fri 9am - 5pm

Netherlands (NL)

Technical Support & Service: +31 172 619961, info@fitshop.nl

Hours: Mon-Thu 09:00-17:00, Fri 09:00-21:00, Sat 10:00-17:00

International (INT)

Technical Support & Service: +49 4621 4210-944, service-int@sport-tiedje.de

Hours: Mon-Fri 8am - 6pm, Sat 9am - 6pm

Austria (AT)

Technical Support & Service: 0800 20 20277 (Freecall), +49 4621 42 10-0, info@sport-tiedje.at

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

Switzerland (CH)

Technical Support & Service: 0800 202 027, +49 4621 42 10-0, info@sport-tiedje.ch

Hours: Mon-Fri 08:00-18:00, Sat 09:00-18:00

Find a detailed overview including addresses and opening hours for all Sport-Tiedje Group stores on the website: www.sport-tiedje.com/en/stores.

Webshop and Social Media

Sport-Tiedje is Europe's largest specialist store for home fitness equipment, with over 70 stores and a renowned online mail order company. Customers can order via 25 national web shops or have equipment assembled on-site. The company also supplies fitness studios, hotels, sports clubs, companies, and physio practices with professional equipment for endurance and strength training.

Sport-Tiedje offers a wide range of fitness equipment from renowned manufacturers, high-quality in-house developments, and comprehensive services like build-up assistance and sports scientific advice. The company employs numerous sports scientists, fitness trainers, and competitive athletes.

Visit us on our social media platforms or our blog!

• Website: www.sport-tiedje.co.uk
• Blog: www.sport-tiedje.de/blog
• Facebook: www.facebook.com/SportTiedje
• Instagram: www.instagram.com/sporttiedje
• YouTube: www.youtube.com/user/sporttiedje

Brands offered by Sport-Tiedje: Taurus, cardiostrong, BODYCRAFT, cardiojump, DUKEFITNESS, DARWIN.