YITAHOME L-Shaped Desk Assembly Instructions
Model Numbers: FTOFOD-6008, FTOFOD-6023, FTOFOD-6024, FTOFOD-6025
Product Overview
This document provides assembly instructions for the YITAHOME L-Shaped Desk. Please follow all instructions carefully to ensure correct assembly.
Notice:
- Follow the installation instructions. Please confirm all accessories are preset before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- If you encounter any problems during installation, please contact YITAHOME customer service.
Parts List
The following parts are included in the package:
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Desk Top Surface | 1 PCS |
| 2 | Small Panel | 1 PCS |
| 3 | Long Desk Surface | 1 PCS |
| 4 | Desk Surface | 1 PCS |
| 5 | Side Panel | 1 PCS |
| 6 | Side Panel | 1 PCS |
| 7 | Vertical Support | 1 PCS |
| 8 | Vertical Support | 1 PCS |
| 9 | Cabinet Side Panel | 1 PCS |
| 10 | Cabinet Side Panel | 1 PCS |
| 11 | Cabinet Top/Bottom Panel | 1 PCS |
| 12 | Cabinet Top/Bottom Panel | 1 PCS |
| 13 | Back Panel | 1 PCS |
| 14 | Support Bar | 1 PCS |
| 15 | Support Bar | 1 PCS |
| 16 | Drawer Front Panel | 1 PCS |
| 17 | Cabinet Side Panel | 1 PCS |
| 18 | Cabinet Side Panel | 1 PCS |
| 19 | Drawer Slide Rail | 1 PCS |
| 20 | Drawer Slide Rail | 1 PCS |
| 21 | Drawer Bottom Panel | 1 PCS |
| 22 | Drawer Bottom Panel | 1 PCS |
| 23 | Back Panel | 1 PCS |
| 24 | Drawer Side Panel | 1 PCS |
| 25 | Drawer Side Panel | 1 PCS |
| 26 | Drawer Back Panel | 1 PCS |
| 27 | Back Panel | 1 PCS |
| 28 | Drawer Base | 1 PCS |
| 30 | Support Bar | 1 PCS |
| 31 | Drawer Side Panel | 2 PCS |
| A | Screw (M7*38) | 45 PCS |
| B | Screw (M4*18) | 26 PCS |
| C | Screw (M6*25) | 26 PCS |
| D | Screw (M6*35) | 6 PCS |
| E | Screw (M3.5*14) | 18 PCS |
| F | Screw | 4 PCS |
| G | Screw | 1 PCS |
| H1 | Drawer Handle | 2 PCS |
| H2 | Drawer Handle Screw | 2 PCS |
| I1 | Drawer Slide | 1 PCS |
| I2 | Drawer Slide | 1 PCS |
| J1 | Cam Lock | 1 PCS |
| J2 | Cam Bolt | 1 PCS |
| DL | Screw | 1 PCS |
| DR | Screw | 1 PCS |
| CL | Screw | 1 PCS |
| CR | Screw | 1 PCS |
Assembly Steps
Step 1
Attach part 15 to part 9 and part 10 using screws (A). Ensure part 9 and 10 are oriented correctly.
Step 2
Connect part 11 and part 12 to parts 9 and 10 using screws (A). This forms the basic cabinet structure.
Step 3
Insert part 13 (Back Panel) into the grooves of the assembled cabinet structure.
Step 4
Attach drawer slide rails (17 and 18) to the cabinet sides using screws (F). Attach CL and CR to the bottom of the cabinet sides using screws (F).
Step 5
Attach drawer slide rails (19 and 20) to the drawer side panels (17 and 18) using screws (A).
Step 6
Insert drawer bottom panels (21 and 22) into the grooves of the drawer side panels (17 and 18). Secure with screws (A).
Step 7
Insert part 23 (Back Panel) into the assembled drawer structure.
Step 8
Attach vertical supports (7 and 8) to the underside of the desk surface (3) using screws (A).
Step 9
Connect side panels (5 and 6) to the desk surface (3) using screws (A).
Step 10
Attach the vertical supports (7 and 8) to the side panels (5 and 6) using screws (D).
Step 11
Attach the assembled cabinet structure (from Step 2) to the left side of the desk using screws (A).
Step 12
Attach the assembled cabinet structure (from Step 6) to the right side of the desk using screws (A).
Step 13
Attach part 3 to the main desk surface using screws (B).
Step 14
Secure the desk structure with cam locks (J1) and cam bolts (J2) (C and E).
Step 15
Attach support bar (30) to the desk using screws (E).
Step 16
Attach part 4 to the desk surface using screws (B).
Step 17
Attach the monitor stand components (1) and (2) to the desk using screws (C and D).
Step 18
Attach back panel (27) to the desk using screws (B).
Step 19
Assemble the drawer using drawer side panels (25 and 31), drawer back panel (26), and drawer base (28). Secure with screws (C).
Step 20
Attach the assembled drawer (from Step 19) to the drawer slide rails.
Step 21
Assemble the drawer sides (24 and 31) with the drawer back panel (31) and drawer front panel (24) using screws (A).
Step 22
Attach drawer handles (H1) to the drawer front panels (16) using screws (H2). Attach drawer slide rails (F) and (J2) to the drawer sides.
Step 23
Attach drawer slide rails (F) to the cabinet interior using screws (F, DL, DR).
Step 24
Insert the assembled drawer into the cabinet. Attach drawer slide rails (F) and (J1) to the drawer and cabinet.
Step 25
Insert the drawer (16) into the cabinet. Attach drawer slide rails (I1, I2) and drawer front panel (16) using screws (F).
Step 26
The drawer assembly is complete.
Step 27
Attach part 1 to the desk using screws (B).
Step 28
Attach part 2 to part 1 using screws (C).
Step 29
Attach the monitor stand components (G) to the desk using screws (F).
