Product Overview
The WT-5810 is a PLL-synthesizer controlled double superhetrodyne diversity tuner designed for use with a UHF wireless system. It employs a compander noise reduction circuit to minimize the influence of ambient RF noise.
Key Features
- Automatic frequency scan
- Integrated squelch function
- Ideally suited for fixed installations such as in event locations, multi-purpose and sports halls, plenary and conference venues, churches, auditoriums etc.
- System always selects the stronger of the two antenna signals for further processing
- Setup with up to 16 simultaneously operating receivers possible
Specifications
| Parameter | Value |
|---|---|
| Power Source | AC mains (supplied AC adapter must be used) |
| Power Consumption | 130 mA (12 V DC) |
| Receiving Frequency | 506 - 538 MHz, UHF |
| Channel Selection | 16 selectable frequencies |
| Receiving System | Double super-heterodyne |
| Diversity System | Space diversity |
| Mixing Output | MIC: -60 dB (*1), 600 Ω, balanced, XLR-3-32 type connector; LINE: -20 dB (*1), 600 Ω, unbalanced, phone jack |
| Mixing Input | -20 dB (*1), 10 kΩ, unbalanced, phone jack |
| Antenna Input | Whip antenna |
| Receiving Sensitivity | 90 dB or more, Signal to Noise ratio (20 dBμV input, 40 kHz deviation) |
| Harmonic Distortion | 1 % or less (typical) |
| Squelch Sensitivity | 16 - 40 dBμV variable |
| Squelch System | Using together of noise SQ, carrier SQ and tone SQ |
| Tone Frequency | 32.768 kHz |
| Indicator | ANT A/B, Audio (peak), Battery alarm, Channel number |
| Channel Check | Usable frequencies scanning |
| Signal to Noise Ratio | 104 dB or more (A-weight, unbalanced output) |
| Frequency Response | 100 Hz - 15 kHz, ±3 dB |
| Operating Temperature | -10 °C to +50 °C (14°F to 122 °F) |
| Operating Humidity | 30 % to 85 %RH |
| Finish | Resin, black |
| Dimensions | 210 (W) x 44 (H) x 205.1 (D) mm (8.27" x 1.73" x 8.07") |
| Weight | 590 g (1.3 lb) |
| Included Accessories | AC adapter x 1 |
*1) 0 dB = 1 V
Dimensions and Views
The WT-5810-AM RM1 Wireless Tuner is depicted with detailed views and measurements:
Unit Views:
Front View: Displays controls such as BATT AF PEAK, SQ, SET, NEXT, VOLUME, and POWER. It also features a display indicating the channel number (e.g., '2') and the model name 'DIVERSITY WIRELESS TUNER WT-5810'.
Rear View: Features ANT A and ANT B antenna connectors, a DC IN power input (12-18V, 130mA), a balanced OUTPUT (600Ω, XLR-3-32 type connector), and an unbalanced MIX IN (10kΩ, phone jack).
Side View: Shows the unit's profile. Key external dimensions indicated on the diagram are approximately 206 mm (8.11 inches) in width, 40.6 mm (1.6 inches) in height, and a depth of 138.7 mm (5.46 inches) for the main body, extending to 152.7 mm (6.01 inches) overall.
Note: These diagrammatic measurements may differ slightly from the overall product specifications.
