Kemei Electric Shaver User Manual
Important Safety Precautions
DANGER: To reduce the risk of electric shock:
- Do not reach for an appliance that has fallen into water. Unplug immediately.
- Do not use the appliance while bathing or showering.
- Do not place or store the appliance where it can fall or be pulled into a bathtub or sink, or into water or other liquids.
- Always unplug the appliance from the USB socket immediately after use.
- Unplug the appliance before cleaning, disassembling, or assembling parts.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons:
- Never leave the appliance unattended when plugged in.
- Close supervision is necessary when this appliance is used by, on, or near children or persons with certain disabilities.
- Use this appliance only for its intended purpose as described in this manual.
- Do not use accessories not recommended by the manufacturer.
- Do not operate the appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has fallen into water. Return the appliance to a service center for examination or repair.
- Keep the cord away from heated surfaces.
- Never drop or insert any object into any opening.
- Do not use the appliance outdoors or in places where aerosol products are used or where oxygen is present or administered.
- Do not use the appliance with a damaged or broken foil or cutter, as it may cause skin injury. Replace damaged parts before use.
- When connecting, always plug the USB connector into the USB socket first, then into the power outlet. To disconnect, set all controls to 0, then pull the plug from the USB socket.
Product Information
This product is intended for professional use.
User Instructions
Charging the Shaver
- The shaver is not charged at the factory.
- Charge the shaver for at least 3 hours before first use for maximum performance.
- Remove the shaver and DC cable from the packaging.
- The associated voltage for this product is DC5V.
- Ensure the shaver's 1/0 switch is in the 0 position for charging.
Shaving
- Keep the appliance clean and dry at all times.
- Remove the plastic protection from the head.
- Check that the outer foils and inner cutters are not damaged. Replace damaged parts before use.
- Ensure the battery is charged.
- Wash and thoroughly dry your skin before shaving.
- Slide the 1/0 switch upwards to position 1.
- Gently stretch the skin of your face with your free hand.
- Move the shaver slowly and evenly with short, circular motions. This will help the hairs stand out and facilitate shaving.
- Hold the shaver at a 90-degree angle to your face, maintaining contact with the foil.
- To facilitate cutting and avoid foil wear, use minimal pressure on your skin.
- To maximize shaving comfort, clean the shaver thoroughly after use.
User Maintenance
If the shaver is to remain unused for a long period of time, store it in a safe, cool, dry place. Do not wrap the power cord tightly around the shaver. Do not hang the shaver by the power cord.
Apart from the recommended maintenance described in this manual, no other maintenance should be performed, except by our after-sales service center.
Dry Cleaning with Brush
- Remove the foil assembly by pressing the button on the right side of the unit. Grasp the foil assembly on both sides and gently lift it off the shaver.
- Gently tap the base of the foil assembly on a flat surface so that the hairs inside fall out. Do not remove the foils, as they may be accidentally damaged.
- Lightly brush the hairs out from the cutters. You can remove them from the shaver if necessary. Blow out any remaining loose hairs.
- Replace the cutters and foil assembly.
Troubleshooting: Charging Issues
- Verify that voltage is present at the outlet (check with a known working appliance).
- Verify that the DC cable is securely plugged into the shaver. Twist the cable connector slightly to ensure a good connection. If charging still does not work, send the shaver to our customer service center for examination and repair or replacement.
