Kemei KM-2024 Classic Web Compound Razor
Before Use
Please read the manual carefully before the first use. It will be helpful for better performance of the shaver.
Charging
- The switch must be turned off when charging.
- Make it fully charged before use it.
- Turn off the switch, open the waterproof plug at the end of the shaver connecting to the USB cord, and connect the other end to the adapter with output 5V 1000mA.
- The indicator light will be red when charging; and the standard charging time is 8 hours.
Specifications
| Model | Type-C | power | IP Rating |
|---|---|---|---|
| KM-2024 | Input: 5V | 3W | IPX4 |
Maintenance for Blade and Foil
- Turn off the switch, hold the body with right hand, and the left hand hold the two sides of the head to pull outward.
- Clean it with brush (refer to figures 3 and 4).
- To install the head.
Replacement Method for Foil
- Turn off the switch.
- Take off the shaver head; and remove the foil from the inside of the head as shown in figure 5.
- Install the outer foil, first bend the foil gently as shown in figure 6, and then put the foil into the head gently from the bottom until it is fixed.
Operation
Please take away the protector and switch to ON position. Remove your unwanted hair by slightly moving this unit against the skin at right angle.
Maintenance
Clean the unit after 2 to 3 times shaving, and then oil it. In this way, the shaver would be better.
Warning
- Please keep the shaver dry.
- Do not charge continuously for more than 24 hours, and do not charge at temperatures below 0°C or above 40°C. Otherwise, the battery life will be shortened.
