Kemei KM-1506 3-in-1 Grooming Device

Features

• Cutting head
• Body
• Switch
• Indicator light
• Shaver
• Guide comb
• Nose trimmer
• Charger
• Cleaning brush

How to Change the Head

1. Hold the machine with one hand.
2. Pull out the head with the other hand. (Refer to photo 10)
3. Other heads have the same operation.

How to Use

Shaver

1. Stretch your hands upwards, nudge the skin, and hold the shaver at a right angle to the skin.
2. Move the shaver back and forth against the direction of beard growth.
3. Push the switch upwards to operate the sideburns knife.

Hair Clipper

1. Flick the switch upwards to move the knife forward at a slight angle close to the hair.
2. Adjust the guide comb up and down to control the cutting length.

Nose Trimmer

Flick the switch upwards.

How to Clean

Shaver Clean

1. Press and hold both ends of the index finger and thumb as indicated by the arrow to dial up.
2. Unplug the device and use the brush to clean the residue.
3. To install the plug, use the arrow pointing downwards.

Hair Clipper Clean

1. Figure A: Press the head along the direction of the arrow to remove the central head.
2. Figure B: Insert the plastic tank by aligning the second metal parts with the pressure head center along the direction of the arrow.
3. Figure C: Press the comb along the direction of the arrow.

How to Charge

1. Use the original factory charging cable.
2. Charge at temperatures between 5°C and 35°C.
3. Ensure hands are dry before plugging in the AC 220-240V power cord. Do not charge in direct sunlight.
4. The indicator light will show when charging.
5. Standard charging time is 8-12 hours.

Importance

• This product cannot be washed. Place it in a dry, well-ventilated area.
• This product is for adults only and should be kept away from children.