ATN X-SOUND HEARING PROTECTOR
MANUAL
BATTERY INSTALLATION
Slide the battery housing up to open the compartment. Install the battery with the correct polarity as indicated in the body. Replace the battery cover and slide down to seal the compartment.
[Diagram: Illustration showing the battery compartment of the hearing protector being opened, and a battery being inserted with correct polarity indicated.]
PRODUCT OVERVIEW
[Diagram: A detailed illustration of the ATN X-Sound Hearing Protector, with the following components labeled: PADDED HEADBAND, BT SYNC BUTTON, BT LED SIGNAL, OMNIDIRECTIONAL MICROPHONE, ADJUSTABLE HEADBAND, ON/OFF SWITCH VOLUME CONTROL, BT/AUDIO VOLUME CONTROL KNOB, AUX JACK.]
FEATURES
- Bluetooth Wireless Technology
- Ultra-Low-Profile Ear Cups
- Audio Input Jack
- Independent Volume Control
- Replaceable Ear Pads
- Two Hi Gain Omnidirectional Microphones
- Recessed Volume Control Knob
- Compact Folding Design
- External Battery Door
- Ultra Padded Headband
SPECIFICATIONS
| Name | Hearing Protector |
|---|---|
| Brand | ATN |
| Model | X-Sound |
| SKU# | ACPROTXSND |
| Noise Reduction Rating | 22 dB |
| Sound Activated Compression (reaction time) | 0.02 s |
| Battery type | 2 AAA |
| Battery life | 300 h |
| Bluetooth version | 5.0 |
| Dimensions | 4.9” x 3.7” x 0.5” / 125 x 95 x 13 mm |
| Weight | 0.8 lb / 370 g |
* ATN reserves the right to change the above specifications at any time without notice.
APPLICATION
The ATN X-Sound Ear Muff reduces harmful loud noise down to safe levels below 82 dB and enhances clarity of surrounding low level sounds such as conversations and announcements. The ergonomic volume control knob allows for total adjustment of the two built-in omnidirectional microphones, while built-in wireless capability enables hands-free calling and music enjoyment. Alternatively, connect a playing device via the 3.5 mm audio jack.
WIRELESS PAIRING
Turn the unit on and hold the BT Button down for 1 second. Pairing will initiate and the blue LED will flash every 2 seconds. Select the name “EM030BT” in the Bluetooth settings on your phone or mp3 player to connect.
CALL HANDLING
- ANSWER CALL: Short press the BT Button to answer an incoming call.
- REJECT CALL: Long press the BT Button to reject an incoming call.
- END CALL: During a call, short press the BT Button to end.
- LAST NUMBER REDIAL: Double press the BT Button to re-dial the last phone number.
- AUDIO PAUSE/PLAY: Short press the BT Button to pause/play music.
- CALL ON HOLD/WAITING: During phone calls, if a new call comes in, double press the BT Button to switch from the first call to the second call. To switch back to the first call and end the second call, short press the BT Button.
WIRELESS BT TECHNOLOGY
- Make and Receive Calls and Listen to music with BT Connection.
- Full Dynamic Range HD Speakers for Clear Balanced Sound.
- Audio in Jack Connects Phone or MP3 via 3.5 mm Cable Included.
SAFE VOLUME CONTROL TECHNOLOGY
- 5x Hearing Enhancement.
- Sound Activated Compression 0.01 Second Reaction Time.
- Recessed Volume Control of Ambient Sound when Sound over 82 dB.
- NRR 22 dB+.
- Two-channel control BT volume and sound amplification volume.
CUSTOMER SUPPORT
For customer service and technical support, please contact American Technologies Network Corp. Address: 2400 NW 95 Ave, Doral, FL 33172. Phone: 800-910-2862, 650-989-5100. Email: service@atncorp.com. Website: www.atncorp.com.
©2021 ATN Corporation. All rights reserved.
