ATN X-Sight LTV Series

Features

• Day/Night Mode
• Record HD Video
• Image Capture
• One Shot Zero
• Step Zoom
• 3D Gyroscope
• 3D Accelerometer
• Multiple Reticles
• USB Type C
• Ultra Low Power Consumption
• Ergonomic Design

Application

The ATN X-Sight LTV scopes are powered by the new ATN Obsidian LT Core, optimized for low power consumption in a small and ergonomic form factor. They offer vivid and crisp clarity during the day and amazing night time performance with the new QHD+ sensor. This model offers a simple, no-frills experience with a competitive price point. Users can record HD videos, achieve fast target acquisition with One Shot Zero, and enjoy over 10 hours of battery life. The scope can be mounted on any platform with standard 30 mm rings. The ATN X-Sight LTV is the digital scope for the masses.

Specifications

* ATN reserves the right to change the above specifications at any time without notice.

Preparing the Device

Unpacking

Follow these steps before using the device:

1. Open the packaging box and remove the X-Sight LTV. Check the contents: Eyecup, Scope Cover, USB-C cable, IR Illuminator, Standard Rings, Manual, Cloth.
2. Ensure that all items are present.
3. Inspect the device for any damage to optical surfaces, body, eyecups, or operation buttons.
4. Ensure all optical surfaces are clean and ready for use.

NOTE: If any accessories are missing or broken, contact ATN's Customer Service at 1.800.910.2862.

Charging the Device

The device is charged via a USB Type-C port located under the rubber cap on the right side. Use the included USB Type-C cable and a 2-amp USB wall charger (not included). Charge the scope for 6 hours using a 2A USB wall charger. Using a charger with lower amperage will increase charging time. Recommended charger is 2A USB. Battery charging time (0-100%) is 6 hours with a 2A USB charger. Battery run time is 10 hours on a single charge.

On/Off

To turn the device on, press and hold the power button for 3-5 seconds until the ATN logo screen appears. To turn the device off, press and hold the power button. If the scope freezes, press and hold the power button for 3-5 seconds, wait 5-10 seconds, and then turn it on again.

Using Your Keypad

The keypad can be used in two ways:

• Short and Quick Taps: Used for most functions and menu navigation.
• Press and Hold: Used for On/Off, Menu, and Night Vision Mode.

Focusing

Diopter Adjustment

Rotate the Diopter Adjustment Ring to achieve optimal sharpness for your vision. Look through the eyepiece, focusing on the reticle and widgets. Rotate the ring until the reticle and widgets appear sharp.

NOTE: Once the Diopter Adjustment is set, it will not need to be adjusted unless another user alters the focus.

Distance Focus

Rotate the Adjustment Ring as necessary to achieve proper focus at various distances.

Mounting Your Scope

CAUTION: Ensure your weapon is not loaded. Use safe weapon handling procedures at all times.

The X-Sight LTV has a 3.5-inch eye relief and can be mounted using 30 mm mounting rings. Place the scope on the bottom half of the rings mounted to the weapon's rail, ensuring sufficient eye relief. Place the top portion of the ring over the bottom portion, align the holes, and tighten the screws. Apply equal torque to all screws. Ensure the rings are tight on the rifle's rail to prevent movement due to recoil.

Interface

Operation with Keypad

1. On/Off Button: Press and hold for 3-5 seconds to power the unit on or off.
2. Up Button: Short press to cycle through zoom levels (3-5.4-7.2-9x or 5-9-12-15x).
3. Left Button: Short press to start/stop video recording. Press and hold to toggle between video and image capture.
4. Center Button: Press to open the Menu.
5. Right Button: Short press to cycle through display brightness levels (1→2→3→1).
6. Down Button: Long press to switch between Day and Night modes. In Night mode, short press to adjust light sensitivity (Auto, High, Low).

Homescreen

The Homescreen displays Scales, Status Bar icons, and Information Widgets.

• Roll Scale: Shows rifle cant based on the internal 3D Gyroscope.
• Pitch Scale: Shows rifle inclination based on the internal 3D Gyroscope.

Menu

Press the Center button to open the Menu. Use the Right button to navigate through the menu options.

• Zeroing: Access the One Shot Zero procedure to zero your reticle to your weapon.
• Reticle: Select one of six reticle styles and change the reticle color.
• Settings: Adjust Sleep Mode, Display Widgets, Date and Time, Language, SD Card, and Factory Settings.

Reticle

Reticle Style

Navigate to the Reticle menu using the Right button. Short press the Center button to access Reticle options. Use the Up or Down buttons to cycle through reticle styles. Short press the Center button to confirm your selection.

Reticle Color

In the Reticle menu, short press the Center button. Use the Right or Left buttons to cycle through color options. Short press the Center button to confirm your selection.

Zeroing

NOTE: Format the micro SD card before Zeroing or Recording.

We recommend using a boresight device for faster target acquisition. Follow the One Shot Zero procedure to zero the scope to your weapon.

To zero the scope, navigate to the Zeroing section in the Menu. Press the Center button until the menu appears. Use the Right button to navigate to the Zeroing option. Two reticles will appear on the display. Keep the weapon steady and fire a round. Use the keypad to move the red reticle to the point of impact, keeping the white reticle on the original point of aim. Short press the Center button to save the zero. To exit the menu, navigate to the exit symbol using the Left button and short press the Center button.

The reticle coordinates (X|Y) are displayed in the upper left corner. At base magnification, coordinates move by one pixel per click.

NOTE: While one shot may be sufficient for zeroing, firing additional shots is recommended to ensure the optic and weapon are zeroed. Make corrections as needed.

Record Video / Image Capture

NOTE: Format the micro SD card before Zeroing or Recording.

The X-Sight LTV records in HD quality. Use a micro SD card (4-64GB, Class 10 SDHC). To activate video recording, short press the Left button. Short press again to stop. To toggle between video and image capture, press and hold the Left button. Short press the Left button to take HD quality images. To return to video recording, press and hold the Left button again.

Settings

Sleep Mode

Sleep mode conserves power by putting the scope into standby when no movement is detected for a preset time (5-30 minutes). The scope will automatically sleep when movement is not sensed. Movement will wake the scope.

Display Widgets

Enable or disable the Roll and Pitch scales.

Date and Time

Set the Date and Time for your scope. Choose between 12H or 24H time format.

Language

Select the menu language: English, Polish, Russian, German, Italian, Bulgarian, and Spanish.

SD Card

Format your micro SD card (4-64GB, Class 10 SDHC) before first use for video recording.

Factory Settings

Reset the scope to factory settings. All custom changes and zero settings will be lost. Save your Zero X/Y coordinates before performing this function.

Warnings and Cautions

• Turn off the device when not in use.
• Do not disassemble, drop, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects, as this will void the warranty.
• Keep the scope in the provided protective cover when not in use.
• Avoid contact with dust, steam, and gas.
• This product contains natural rubber latex, which may cause allergic reactions.
• Handle the scope carefully as it is a precision electro-optical instrument.
• Do not scratch external lens surfaces or touch them with your fingers.

CAUTION: Failure to follow these safety instructions could result in damage to the device!

2 Year Product Warranty

This product is guaranteed against manufacturing defects for two years from the date of purchase. ATN will repair or replace the product at its option. This warranty does not cover products that are misused, altered, modified, or repaired without ATN's prior written consent, or products that are discontinued or for which parts are unavailable. ATN is not responsible for defects or damage resulting from mishandling, abuse, misuse, improper storage, or improper operation, including use with incompatible equipment or failure to maintain specified environmental conditions. The warranty is extended only to the original purchaser. Any breach of warranty must be reported to ATN within the applicable warranty period.

No other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose, apply to this product. All such implied warranties are expressly disclaimed.

Limitation of Liability

ATN is not liable for claims, actions, suits, proceedings, costs, expenses, damages, or liabilities arising from the use of this product. The customer assumes sole responsibility for the product's operation and use. ATN's sole undertaking is limited to providing the products and services outlined in this agreement. ATN's obligations extend solely to the customer. ATN's liability for damages shall not exceed the fees paid to ATN for the product. ATN is not liable for special, indirect, incidental, or consequential damages, including lost income, revenue, or profit, whether foreseeable or not.

Product Warranty Registration

To validate the warranty, ATN must receive a completed Product Warranty Registration Card or complete the registration on the ATN website (www.atncorp.com). Mail the card to ATN Corporation, 1341 San Mateo Avenue, South San Francisco, CA 94080.

Obtaining Warranty Service

To obtain warranty service, contact the ATN service department by calling 800-910-2862 or 650-989-5100, or email service@atncorp.com to receive a Return Merchandise Authorization (RMA) number. Return the product postage paid, with a copy of your sales receipt, to ATN Corporation at the address above. Ensure the product is fully insured with correct postage. ATN is not responsible for improper postage or missing/damaged merchandise during shipment. Mark the RMA# clearly on the outside of the shipping box. Include a letter with your RMA#, Name, Return Address, reason for service, contact information, and proof of purchase. Returns without an RMA may be refused or significantly delayed. Estimated warranty service time is 10-20 business days. End-user is responsible for return postage. ATN will cover return postage within the continental USA for warranty repairs if the product is covered by the warranty. ATN will return products via domestic UPS ground or mail. Any other shipping method requested will be at the customer's expense.