ThermoWorks ThermaData® WiFi

Models and Order Codes

Accessories/Related Items

• Bracket/Stand (400-8590)
• Protective Boot (830-880)
• Mounting Magnet (830-800)
• Waterproof Pouches Available (more info online)

Instrument Operation

Connect probes via the sockets located at the side of the instrument. The ThermaData WiFi features an LCD displaying temperature, humidity (model dependent), Wi-Fi connecting status, MAX/MIN recorded temperatures, alarm status, and battery level. Configuring settings and connecting the logger is done through the software.

LED Indicators

• A flashing green LED indicates the logger is active and logging.
• A flashing red LED indicates that customized alarm limits have been exceeded.

Start Button/Audit Check

Pressing the Start button once immediately transmits all current saved data from the instrument to the software. Pending settings are also sent to the instrument, and the transmission/event log is clearly marked.

MAX/MIN Button

Press the MAX/MIN button once to display the maximum temperature and/or humidity (model dependent) reached during recording. Press again to display the minimum temperature and/or humidity recorded.

Open Circuit/Faulty Probe

If a probe develops an 'Open Circuit' fault, the instrument will display 'Err'.

Battery Charging

1. Unscrew and remove the battery cover.
2. Replace batteries, noting the correct polarity.
3. Replace the battery cover, then tighten the battery screw securely.
4. Dispose of old batteries appropriately.

Replacing batteries does not require Wi-Fi settings to be reconfigured.

Software

ThermoWorks Cloud

Create an account at cloud.thermoworks.com. Select your service level to track graphs, locations, users, and set up notifications. Access your data from any smart device, desktop, or internet-connected device. Full operating instructions are in the ThermoWorks Help Center.

ThermaData Studio

Download and install ThermaData Studio from www.thermoworks.com/software. Use your Wi-Fi network to pass data directly to your PC. View, print, and export graphs. Create a Probe Map for live monitoring. Full operating instructions are in the Help File within ThermaData Studio.

Warning

IPA and other solvents may damage the instrument's case and screen.

Environmental conditions may affect signal strength.

Guarantee

ThermaData WiFi has a two-year warranty against defects in components or workmanship. ThermoWorks will repair or replace defective products free of charge during this period. This warranty does not apply to probes, which have a six-month warranty. Full liability details are available in ThermoWorks' Terms & Conditions of Sale at www.thermoworks.com/product-warranty.

For warranty, service, and technical assistance, contact ThermoWorks' Technical Support at (801) 756-7705 or email at techsupport@thermoworks.com.