Eufy Security SpaceView User Manual
Brand: Eufy
Model: T8300-C
Note: make sure you get the latest firmware upgrade for your baby monitor.
What's in the Box
The following items are included in the package:
- Baby Camera T8300-C
- Wall Mount
- Camera Micro-USB Power Cable (3 m)
- Camera Adapter (5V 2A)
- Mounting Screws
- Wide-Angle Lens
- User manual
Power adapter varies by region.
Camera Features
The baby camera unit includes the following features:
- 1 Standard camera lens: The primary lens for capturing video.
- 2 Microphone: Captures audio from the baby's room.
- 3 Power LED Status indicator: Shows the operational status of the camera.
- 4 Speaker: For two-way audio communication (if supported by the monitor).
- 5 Micro USB port: Used for connecting the power cable.
- 6 Pairing button: Used to initiate the pairing process with the monitor.
Visual Description: The camera is a compact, spherical unit with a rotating head. It is shown from the front, side, and rear to highlight the features. The front view shows the lens and LED indicator. The side view shows the microphone and speaker. The rear view shows the power port and pairing button.
Setting Up the Camera
Camera Installation
To set up the camera:
- Connect the baby camera's Micro USB power cable to the camera adapter (5V 2A).
- Connect the camera adapter to a power outlet.
- Finally, connect the other end of the baby camera's micro USB power cable to the micro USB port on the camera.
Visual Description: An illustration shows the power adapter plugged into a wall socket, the USB cable connecting the adapter to the baby camera, and the camera itself.
Adding a New Baby Camera to the Baby Monitor
- Check the firmware version of the monitor. Ensure your SpaceView Baby Monitor is running firmware version v2.3.0 or above. For the latest firmware updates, contact customer service at: support@eufylife.com.
- On the monitor's menu, navigate to
Camera>Add Camera, and follow the on-screen instructions to start the pairing process. - Press and hold the pairing button on the rear of the camera for 1 second. You should hear a notification prompt indicating the pairing process has begun.
Visual Description: Two screenshots of the monitor interface are shown. The first shows the settings menu with options like 'Night Vision Mode', 'Time Set', 'Language', 'About', etc. The second shows the 'Add Camera' screen with a countdown timer and instructions to push the button on the camera to pair.
Camera Placement (on the Wall Mount)
To mount the camera on a wall:
- Use the monitor to test the desired viewing angle from your chosen mounting spot.
- Mark the screw holes for the wall mount with a pencil.
- Drill 1/5" (approximately 5mm) holes into the wall.
- Insert the provided wall anchors into the drilled holes.
- Insert the mounting screws through the holes in the wall mount and screw them into the anchors.
- Place the camera onto the mounted wall bracket.
Visual Description: An illustration shows the wall mount being attached to a wall. It depicts two installation orientations: 90° vertical installation and 180° horizontal wall installation. Another illustration shows the camera being placed onto the wall mount.
Cycle Camera Functionality
When the monitor has two or more baby cameras linked (up to a maximum of 4), you can enable the 'Cycle Camera' function. The monitor will automatically cycle through the video feeds of each paired camera. Press the OK button on the monitor to manually switch between different cameras.
Visual Description: A screenshot of the monitor interface shows the 'Cycle Cameras' option with a sub-menu allowing selection of intervals (e.g., 5 Secs, 10 Secs, 15 Secs, 30 Secs) or 'Off'.
Replacing the Camera Lens
The Eufy Security SpaceView camera supports interchangeable lenses.
| Lens Type | Usage | Lens Description |
|---|---|---|
| Standard camera lens (default lens) | Recommended for general viewing. Infants are clearly seen within a 2-3m range. The lens angle of view is 62°. | [Image of standard lens: A small, circular lens assembly] |
| Wide-angle lens | Provides a wider view of the room. The lens angle of view is 110°. | [Image of wide-angle lens: A larger, circular lens assembly designed to fit over the standard lens] |
The standard camera lens is not removable. To use the wide-angle lens, simply place it over the standard camera lens and fasten.
Wide-angle Lens Installation
To install the wide-angle lens:
- Place the baby camera on a flat surface. Clean the lens with a soft cloth.
- Place the wide-angle lens over the standard camera lens.
- Turn the wide-angle lens clockwise to fasten it onto the standard camera lens. Stop turning once you feel resistance.
Visual Description: An illustration shows the wide-angle lens being attached to the camera. It indicates the 'Back' and 'Front' of the lens and shows two steps: placing the lens (labeled '1') and turning it clockwise (labeled '2').
Safety Information
Warnings
Strangulation Hazard:
Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m / 3ft away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
Declaration of Conformity
This product complies with the radio interference requirements of the European Community.
Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website: https://www.eufylife.com/.
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. Connection to so-called "power USB" is prohibited.
A statement regarding the AC/DC adapter as a disconnect device is missing in the user manual. The statement shall require a socket outlet that is installed near the equipment and that shall be easily accessible. The adapter shall be installed near the equipment and shall be easily accessible.
Environmental Conditions
Do not use the Device in environments that are too high or too low in temperature. Never expose the Device to strong sunshine or a very wet environment.
- Suitable temperature for T8300-C and accessories: -20°C to 40°C.
- When charging, place the device in an environment with normal room temperature and good ventilation.
- Recommended charging environment temperature range: -10°C to 40°C.
Charger Information
Please ensure to use only the charger offered by the manufacturer. Using an unauthorized charger may cause danger and violate the authorization of the projecter and the guarantee article.
- The charger output voltage/current is 5Vdc/2A. The plug is considered the disconnect device of the adapter.
- If using a third-party charger, the recommended output voltage/current is 5Vdc/2A, and the adapter shall be CE approval type.
Battery Disposal
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
RF Exposure Information
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use the product maintaining a 20cm distance between the device and the human body.
- Operating Frequency Range: 2410-2477MHz
- T8300-C Max Output Power: 18.04dBm
The T3800-C device has also been evaluated to meet general RF exposure requirements and can be used in fixed exposure conditions. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use product that maintain a 20cm distance between the device and human body.
Importer Information (EU)
Importer: Anker Technology (UK) Ltd
Address: Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, United Kingdom B11 2AA
Recycling Information
[Recycling Symbol Description: A symbol showing a product being placed into a recycling bin, indicating that the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling.]
Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The T8300-C device has been evaluated to meet general RF exposure requirements. The T8300-C can be used in fixed exposure condition. The minimum separation distance is 20cm.
Importer Information (US)
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
Telephone: 1-206-383-8247
Customer Service
Warranty
12-month limited warranty
Call Us
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
Email Us
Customer Support: support@eufylife.com
Follow Us
- Facebook: @EufyOfficial
- Twitter: @EufyOfficial
- Instagram: @eufyofficial
