Honeywell Home DC515XXP2/BS Doorbell Installation Guide

Getting Started

This guide provides instructions for installing your Honeywell Home doorbell. The package includes the following components:

• Doorbell Button (x1)
• Doorbell Receiver (x1)
• Mounting Bracket (x1)
• CR2032 Battery (x1)
• Screws (x2)
• Screwdriver (x1)

Installation Steps:

1. Mounting the Doorbell Button: Choose a suitable location for the doorbell button. Use the provided screws and screwdriver to attach the mounting bracket to the wall. Ensure the bracket is securely fastened.
2. Attaching the Doorbell Button: Align the doorbell button with the mounting bracket and push it firmly until it clicks into place.
3. Installing the Battery: Open the battery compartment on the back of the doorbell button. Insert the CR2032 battery, ensuring the positive (+) terminal is correctly oriented. Close the battery compartment.
4. Testing the Doorbell: Press the doorbell button to test its functionality. The receiver should chime.

Diagrams illustrating installation:

• A diagram shows the doorbell button being mounted to a wall with screws.
• A diagram shows the CR2032 battery being inserted into the doorbell button.
• A diagram shows the doorbell button being attached to the mounting bracket.
• A diagram shows the doorbell button being tested.

Optional Features

The Honeywell Home doorbell offers several optional features:

• Chime Selection: Choose from various chime melodies including "Hello", "Ding dong", "Westminster", "Marimba", "Piano", "Bell", "Telephone", "Soft alert", "Glocken", "Clock ding dong", and "Contemporary".
• Volume Control: Adjust the volume of the chime to your preference.
• Mute Function: Temporarily mute the doorbell chime.
• Sleep Mode: Set the doorbell to not chime during specific hours.

Diagrams illustrating optional features:

• A table lists optional features and their corresponding settings.
• Diagrams show how to select different chime sounds and adjust volume.
• A diagram illustrates setting a sleep mode for the doorbell.

Troubleshooting

If you encounter issues with your doorbell, refer to the following troubleshooting tips:

• No chime when button is pressed: Ensure the battery is correctly installed and has sufficient power. Check that the doorbell button and receiver are within range.
• Low volume: Adjust the volume settings on the receiver.
• Intermittent chime: Check for potential sources of interference. Ensure the battery is fresh.

For further assistance, download the full guide from livewell.honeywellhome.com.

Product Information

Manufacturer: Resideo Technologies, Inc.

Trademark License: Honeywell Home trademark is used under license from Honeywell International Inc.

Model: DC515XXP2/BS

Website: livewell.honeywellhome.com