HOMCOM
Model: 839-622V00 / 839-622V70
⏱️ 30 min assembly | ? 5 Steps | ⚖️ 240 kg max load
Important Information
For Future Reference: Read Carefully.
Only for domestic use
Instructions for use:
- Place the sofa stably on a flat floor.
- Stay away from open flames or heat sources.
- Avoid overloading the sofa.
Precautions before assembly:
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Check the seating regularly.
Storage conditions:
- Store fabric completely dry in a clean, dry place to avoid the risks of mold.
Safety Warning: Beware of crushing and cutting hazards during assembly. ⚠️
The manufacturer declines all responsibility for damages due to improper installation or weather. If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Cushion Restoration
Your sofa cushions are vacuum-packed for shipping. To restore their shape, follow these steps:
Step 1: Carefully open the vacuum bag, avoiding damage to the cushion.
[Visual: Bag being cut open with scissors]
Step 2: Gently press from the sides to let air enter.
[Visual: Hands pressing the sides of the cushion to allow air in]
Step 3: Press from the front to ensure even expansion.
[Visual: Hands pressing the front of the cushion to ensure uniform expansion]
Step 4: Adjust each section until the surface is even.
[Visual: Hands smoothing and adjusting the cushion surface]
Step 5: Place in a dry, ventilated area for 72-96 hours to reach optimal use condition.
[Visual: Warning symbol indicating dry, ventilated placement]
Parts and Hardware
Parts:
Hardware:
Assembly Instructions
General Instruction: Pre-install all screws to 50% depth first, then fully tighten to 100% after ensuring proper alignment.
Step 01: Attach part D to the main frame using screws J and part G.
[Visual: Diagram showing part D being secured to the base frame with screws J and G]
Step 02: Attach the seat base (Part C) to the frame using screws H, M, washers K, and the Allen key N.
[Visual: Diagram showing Part C being attached to the frame with hardware H, M, K, N]
Step 03: Attach the backrests (Parts A and B) to the frame using screws I and washers L.
[Visual: Diagram showing Parts A and B being attached to the frame with hardware I, L]
Step 04: Attach the legs (Part F) to the bottom of the sofa.
[Visual: Diagram showing legs F being screwed into the base]
Step 05: Insert the cushions (Part E) into the sofa.
[Visual: Diagram showing cushions E being placed onto the sofa]
Assembly Complete
Your HOMCOM 2-Seater Sofa is now assembled and ready for use.
[Visual: Illustration of the fully assembled 2-seater sofa]
Contact and Support
For questions or support, please contact the appropriate regional customer care center:
United States (US)
Imported by Aosom LLC
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Canada (CA)
Imported by Aosom Canada Inc.
Phone: 416-792-6088
Email: customerservice@aosom.ca
Germany (DE)
MH Handel GmbH
Phone: +49 40 87408465
Email: service@aosom.de
Italy (IT)
AOSOM Italy srl
Phone: 0039-0249471447
Email: clienti@aosom.it
Spain (ES)
SPANISH AOSOM, S.L.
Phone: 0034-931294512
Email: atencioncliente@aosom.es
United Kingdom (UK)
MH STAR UK LTD
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
France (FR)
MH FRANCE
Phone: 0033-1-84166106
Email: aosom@mhfrance.fr
Recycling Information: Please refer to Adresses sur quefairedemesdechets.fr for disposal information.
