Laresar L6 Nex Robot Vacuum Cleaner App Quick Start Guide

For any issues with this device, please contact: support09@laresar.us

APP Download and Connection

Scan the QR code or search for the "Laresmart" app in Google Play or the App Store. Compatibility: iOS 10.0 and higher, Android 8.0 and higher.

Note: For a smooth connection, ensure the router, mobile phone, and robot vacuum cleaner are placed close to each other.

APP Connection Steps (AP Mode)

1. Press the 'Wi-Fi' and 'Power' buttons simultaneously for 5 seconds until you hear a sound and the Wi-Fi indicator light flashes.

2. Connect your mobile phone to the "SmartLife-XXXX" Wi-Fi hotspot.

3. Open the Laresmart app and select 'Add L6 Nex device'.

4. Connect to your 2.4 GHz Wi-Fi network and enter the password.

Note: Ensure your Wi-Fi network is 2.4 GHz and that the Wi-Fi account and password are entered correctly.

[Visual Description: A series of screenshots showing the app connection process, from connecting to the hotspot to successfully adding the device.]

App Function Introduction

1. APP Main Interface Introduction

The main interface displays various controls and information:

• 1-Restricted area setting
• 2-Map editing
• 3-More function
• 4-Worked time
• 5-Cleaned area
• 6-Remaining power
• 7-Switch on/off
• 8-Cleaning as required
• 9-Cleaning of selected area
• 10-Cleaning of defined area
• 11-Recharge

2. Intelligent Cleaning (Default Mode)

The robot vacuum cleaner scans the environment, generates a map, and intelligently divides areas. It cleans each area sequentially in a Z-shape pattern and returns to the charging base when finished.

Note: For optimal map building, start the robot from the charging base during the first cleaning session.

3. Cleaning as Required

Select this function in the Laresmart app. Tap a point on the map, and the robot will move to that position and clean a 1.6m x 1.6m square area centered on itself.

4. Cleaning of Selected Area

Use the Laresmart app to select this function. Choose a specific area on the map, and the robot will clean only that designated zone.

Note: To ensure the robot stays within the selected area and for safety, clear any obstacles around the planned zone. This function does not provide safety isolation.

5. Cleaning of Defined Area

Select this function in the Laresmart app. Choose one or more defined areas on the map, and the robot will clean them.

Note: Similar to 'Cleaning of Selected Area', clear obstacles around defined zones for optimal performance and safety. This function does not provide safety isolation.

6. Restricted Area Setting

Use the Laresmart app to edit restricted areas. Select and set zones on the map that the robot should not enter during cleaning.

Notes:

• This feature is for defining cleaning boundaries and should not be used to block hazardous areas.
• If the robot is moved or the home environment changes significantly, the map and restricted areas may become invalid.

How to Use Your L6 Nex

1. Place Charging Dock and Power It

Position the charging dock and plug it in. Ensure any excess power cord is neatly stored in the back of the dock.

[Visual Description: Diagram showing the charging dock placement with recommended clearance zones: 0.5m on each side, 1.5m in front.]

2. Install the Side Brushes

Attach the side brushes to the robot vacuum cleaner.

[Visual Description: Illustration showing how to attach the side brushes to the underside of the robot.]

3. Start Cleaning

Press the power button on the robot unit or use the app control to begin the cleaning cycle.

4. Recharge Method

The robot can recharge automatically after cleaning, automatically recharge when the battery level drops to 15% or below, or be manually sent back to the charging base at any time via the app.

[Visual Description: Icons representing automatic recharge after cleaning, automatic recharge on low battery, and manual recharge.]

Important Safety Precautions

To ensure safe operation and prevent damage:

• Remove any power lines or debris from the floor that could cause the robot to trip.
• Clean carpet tassels or ensure the robot operates on short-hair rugs.
• If furniture has gaps less than 8cm at the bottom, the robot may get stuck. Remove such furniture or clear the path.
• Place a guardrail at the edge of multi-level floors (e.g., duplexes) to ensure the product's safe operation.