JBC PHST Table-Built-In Panel for PHS

Packing List

The following items should be included:

• Table-Built-In Panel for PHS: 1 unit
• Windowed Cover for PHS: 1 unit
• Small Cover for PHS: 1 unit
• Cover for Console: (implied, used for console protection)
• Screws (Velox 4x20 - zinc plated in black): 6 units
• Manual (Ref. 0019676): 1 unit

Features

The PHST comes with four covers, which can be used interchangeably depending on your needs. The Table-Built-In Panel for PHS is designed to accommodate the preheater unit and its console and to be integrated into the workbench.

Covers Included:

• Cover for PHS
• Cover for Console
• Windowed Cover for PHS
• Small Cover for PHS

Diagram Description: A diagram shows the panel with distinct recessed areas for a "Preheater Unit*" and a "Console*". Asterisks indicate these components are not included and are sold separately.

Options

Cover and protect the work space using the different covers provided with PHST. The console can be covered by the console cover. For the other three PHS covers, see the following usage options:

Option 1:

While working with the preheater, the side area next to the heating zone can be covered using the windowed cover for PHS.

Diagram Description: Shows the panel with the windowed cover in place, exposing a central area.

Option 2:

When work is no longer in progress, the entire preheater area can be covered. The cover protects the preheater and keeps more space free on the workbench.

Diagram Description: Shows the panel with the full "Cover for PHS" in place, covering the entire main recess.

Option 3:

While working with the preheater and the support, the side area next to the support can be covered using the small cover for PHS.

Diagram Description: Shows the panel with the small cover in place, covering a side section.

Assembly

Note: If the preheater is used the other way round, all preheater covers can also be fitted the other way round.

Diagram Description: Two diagrams show the panel with the heating area oriented on the right side and on the left side.

Assembly Instructions:

1. Cut an opening on your work table according to the dimensions shown in the "Opening Dimensions for Panel Installation" section.
2. Fit the panel into the opening.
3. Fix the panel to your workbench with the supplied screws.

Opening Dimensions for Panel Installation

Diagram Description: A technical drawing displays the dimensions for cutting an opening in a workbench to install the PHS-STA panel. It shows a side view and a top view of the panel within a workbench cutout. Key dimensions are provided in millimeters and inches:

• Overall panel dimensions: 602 mm (23.7 in) x 302 mm (11.89 in).
• Recess depth: 12 mm (0.47 in).
• Corner radii: R5 and R21.
• Cutout dimensions: 543 mm (21.38 in) x 278 mm (10.94 in).
• Recess for the panel edge: 29.5 mm (1.16 in).
• Thickness of the panel edge: 1.6 mm (0.06 in).
• Labels indicate "Workbench", "Recess", and "Opening".

Notes

A section for user notes is provided.

Specifications

PHST Table-Built-In Panel for PHS

Reference: PHS-STA

• Product Dimensions (L x W): 602 x 302 mm (23.7 x 11.9 in)
• Package Dimensions (L x W x H): 640 x 350 x 120 mm (25.2 x 13.78 x 4.72 in)

Complies with CE standards.

ESD Safe.

Warranty

JBC's 2-year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor.

The warranty does not cover product wear or misuse.

For the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.

Disposal

This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

Icon Description: The WEEE symbol ([recycle symbol]) is displayed.

Icon Description: CE and EAC conformity marks are displayed.