Required Tools
? Screwdriver
? Hammer
? Level
? Wrench
Drill
? Measuring tape
10mm tool
Installation Kit
- A1
- 8x60 (x4)
- A2
- Ø10x60 (x4)
- A3
- M8 (x4)
- B1
- M6 (x4)
- B2
- Ø8x10 (x4)
- B3
- Ø8x20 (x4)
- C1
- M6x12 (x4)
- C2
- M6x20 (x4)
- D1
- M8x12 (x4)
- D2
- M8x20 (x4)
- D3
- M8x30 (x4)
- D4
- M8x50 (x4)
- E1
- M4x12 (x4)
- E2
- M4x20 (x4)
- F1
- Ø8.5 (x4)
- F2
- M8 (x4)
- F3
- M8, M6 (x1)
- F4
- 6x6 (x1)
- F5
- 4x4 (x1)
- H1
- (x1)
- H2
- M6x6 (x4)
Installation Steps
-
Step 1: Preparation
Gather all required tools and components from the installation kit. Ensure you have a clear workspace.
Visual shows various screws, bolts, and tools laid out. -
Step 2: Wall mounting the bracket
Attach the wall bracket (H1) to the wall using appropriate screws and wall anchors if necessary. Ensure the bracket is level and securely fastened. A 10 mm measurement is indicated for alignment.
Visual shows the wall bracket (H1) being attached to a wall, with arrows indicating screw placement and a 10mm measurement guide. -
Step 3a: Mounting on TV
Select the correct screws (C1, C2, D1-D4, E1-E2) and spacers (B1, B2, B3) based on your TV's backside (flat or curved). Attach the TV mounting arms to the back of the TV. Note: Washers are not needed for D-screws.
Visual shows two scenarios: attaching mounting arms to a flat TV backside using screws C1, D1, D4, E1 and spacer B1; and to a curved TV backside using screws C2, D2, D4, E2 and spacer B1. It also shows alternative screw/spacer combinations for curved TVs (D3, D4 with B3). A note indicates no washer for D-screws. -
Step 3b: VESA variation
This section supports VESA mounting patterns: 300x200 and 400x300.
Visual shows two VESA patterns: 300x200 and 400x300. -
Step 4: Mounting TV on bracket
Carefully lift the TV and hook it onto the wall bracket. Ensure a 3 mm gap between the TV and the bracket. Secure the TV using parts F5, F3, F4, and H2.
Visual shows the TV being attached to the wall bracket, with a 3mm gap indicated. Parts F5, F3, F4, and H2 are shown for securing. -
Step 5: Adjustments
Adjust the TV's position for optimal viewing. The bracket allows for tilt adjustment (-12/+2°), swivel (180°), and rotation (-/+3°).
Visual shows the TV bracket with indicators for tilt adjustment (-12/+2°), 180° swivel, and +/-3° rotation. Parts F5, F3, F4, H2 are shown in the adjustment mechanism.
Need More Help?
Scan the QR code or visit our website for downloads and further assistance.
Website: www.hama.com
Product Code: 00220841
? Scan for Downloads
Recycling information: PAP, Raccolta Carta
| hama.com
