Quick Installation Guide
Required tools
- 10mm drill bit
- 13mm drill bit
Installation kit
The following components are included in the installation kit:
| Part | Description |
|---|---|
| A1 | 8x70 (x3) |
| A2 | Ø10x60 (x3) |
| A3 | M8 (x3) |
| B1 | M6 (x4) |
| B2 | Ø8x10 (x4) |
| B3 | Ø8x20 (x4) |
| C1 | M6x12 (x4) |
| C2 | M6x20 (x4) |
| D1 | M8x12 (x4) |
| D2 | M8x20 (x4) |
| D3 | M8x30 (x4) |
| D4 | M8x50 (x4) |
| E1 | M4x12 (x4) |
| E2 | M4x20 (x4) |
| F1 | M6x12 (x2) |
| F2 | M6 (x2) |
| F3 | M6x8 (x8) |
Installation Steps
1a Drilling the holes
Mark the desired position on the wall. Use the bracket as a template to mark the drilling points, ensuring they are level. Drill holes with a 10mm diameter and a depth of 70mm.
1b Wall mounting the bracket
Insert suitable wall plugs (not supplied) into the drilled holes. Mount the wall bracket (A1) onto the wall using screws (A3). Ensure the bracket is securely fastened.
2 Fixing the screws
Attach the TV mounting plate to the wall bracket. This plate is compatible with VESA mounting patterns of 300x300mm and 400x400mm. Use screws (F3) for this step.
3 Mounting on backside of the TV
Attach the TV arms to the rear of the television. For flat-screen TVs, use screws C1, D1, D4, E1 along with component B1. For curved TVs, use screws C2, D2, D4, E2 along with component B1. Note: Washers are not required for the D-type screws.
4a Adjustment
Adjust the TV bracket to the desired viewing angle, including tilt and swivel.
4b Fixing
Secure the TV to the wall bracket using screws F1 and F2.
Do you need more help?
If you require further assistance, please scan the QR code or visit our support website:
