Hama TV Wall Bracket
Model: 00118106
Product Overview
Thank you for choosing a Hama product. This document provides comprehensive operating instructions and safety notes for the Hama TV Wall Bracket (Model 00118106). Please read all instructions carefully before installation and keep them for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Specifications
Maximum Load Capacity | 25 kg |
---|---|
Screen Size | 48-122 cm (19" - 48") |
Depth | 2.3 cm |
Wall Mounting Plate Dimensions | 22.0 x 9.6 cm |
Mounting Holes | According to VESA standard up to 200x200 |
Package Contents
- TV wall bracket
- TV support arms (2x)
- Installation kit (see contents, Fig. 1)
- These operating instructions
[Note] Please check that the installation kit is complete before installing the bracket and ensure that none of the parts are faulty or damaged.
Required Tools
- Drill (with 8 mm drill bit)
- Screwdriver
- Wrench (for 10 mm nuts)
- Measuring tape
- Pencil
- Level
Installation Kit Components
- (A1) 6x50 (x4)
- (A2) Ø8x40 (x4)
- (A3) M6 (x4)
- (B1) M6 (x4)
- (B2) Ø8x10 (x4)
- (B3) Ø8x20 (x4)
- (C1) M6x12 (x4)
- (C2) M6x20 (x4)
- (D1) M8x12 (x4)
- (D2) M8x20 (x4)
- (D3) M8x30 (x4)
- (E1) M4x12 (x4)
- (E2) M4x20 (x4)
- (E3) M4x45 (x4)
- (F1) Spacer (x1)
Safety Notes
[Warning] Given the multitude of terminal devices and wall structures, the supplied mounting kit may not cover all options. Screws may occasionally be too long. Supplied wall plugs are for concrete and solid brick walls only. Read your terminal device's instructions for suitable fasteners. If supplied kit lacks suitable fasteners, purchase from a specialist dealer. If wall material differs, purchase suitable mounting materials. Never apply force during mounting; it can damage the device or bracket. If in doubt, have it mounted by a qualified technician. Do not mount above locations where persons might linger. Periodically check the bracket's security and safety (at least quarterly). Do not exceed maximum load capacity or dimensions. Load symmetrically. Maintain safety clearance. Remove load and stop use if damaged.
Installation Instructions
[Note] Only mount the TV wall bracket with the help of a second person.
Different end devices have different connection options. Ensure necessary connections remain accessible after installation.
The same mounting kit is included with all Hama TV wall brackets. Unneeded parts may be left over; keep them for future use.
[Warning] This product is suitable for wall mounting only. Before installing, ensure the wall is suitable for the weight and check for electrical wires, water, gas, or other lines at the installation location. Note that provided wall anchors are for concrete and solid brick walls only. Observe other warnings and safety instructions.
Proceed step-by-step according to the illustrated installation instructions (Fig. 1 ff.).
Step 1: Prepare the Wall and Mount Bracket
Mark the wall for drilling. Use an 8 mm drill bit to create holes. Ensure the wall is suitable and free of utilities.
Attach the wall bracket using appropriate screws (e.g., A1, A2, A3, B1, C1, D1, E1) and wall plugs.
Step 2: Attach Support Arms to the TV
For flat TV backside: Use screws B2, B3, C1, C2, D1, D2, D3, E1, E2, E3 and B1. Ensure screws are the correct length and hand-tightened.
For curved TV backside: Use screws C2, D2, E2, E3 and B1, B2. Ensure screws are the correct length and hand-tightened.
Use spacer (F1) if the TV back is uneven.
Step 3: Mount TV to Bracket
Hook the support arms onto the wall bracket. Secure by tightening screws (e.g., C1, D1, E1, E3).
[Note] Ensure the bracket lies flat and evenly on the back of the TV. Use enclosed spacers for unevenness. Ensure all screws have the proper length and are hand-tight.
Setting and Maintenance
[Note] Bracket is not adjustable.
Check bracket security and safety regularly (at least every three months). Clean with water or standard household cleaners.
To secure, insert carrying arms into the wall plate and tighten both screws.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.