Quick Installation Guide
Required Tools
- [wrench] 8 mm
- [drill] 10 mm
Installation Kit
| Part | Description | Quantity |
|---|---|---|
| A1 | 6x50 | x4 |
| A2 | Ø8x50 | x4 |
| A3 | M6 | x4 |
| B1 | M6 | x4 |
| B2 | Ø8x10 | x4 |
| B3 | Ø8x20 | x4 |
| C1 | M6x12 | x4 |
| C2 | M6x20 | x4 |
| D1 | M8x12 | x4 |
| D2 | M8x20 | x4 |
| D3 | M8x30 | x4 |
| E1 | M4x12 | x4 |
| E2 | M4x20 | x4 |
| E3 | M4x45 | x4 |
| F1 | [spacer/template] | x1 |
Installation Steps
1. Drilling the Holes
Mark the desired position on the wall. Use a drill with an 8mm or 10mm drill bit to create four holes at the marked locations. Insert wall plugs (A2) into the drilled holes.
Diagram description: Wall marking, drilling process, inserting wall plugs.
2. Wall Mounting the Bracket
Align the wall bracket with the holes. Secure the bracket to the wall using screws (A1) and wall plugs (A2).
Diagram description: Bracket aligned with wall, screws (A1) inserted through bracket into wall plugs (A2).
3. Mounting on Backside of the TV
Attach the TV brackets (B1, B2, B3) to the back of your TV using the appropriate screws (C1/C2, D1/D2/D3, E1/E2/E3) and washers. Refer to the diagrams for specific screw and washer combinations based on your TV's backside (flat or curved). Note: Washers are not needed for D-screws.
Diagram description: Flat TV backside configuration (B1 + C1, D1, E1, E3), Curved TV backside configuration (B1 + C2, D2, E2, E3), and other bracket (B2, B3) and screw (D3, E3) combinations.
4. Adjustment & Fixing
Lift the TV and hang the attached brackets onto the wall mount. Ensure it is securely seated. Secure the TV to the wall mount using the provided locking mechanism or screw.
Diagram description: TV being hung on the wall mount, final locking screw being tightened.
| hama.com
