ThermoPro TempSpike XR Wireless Smart Meat Thermometer

1. Introduction

Thank you for purchasing the TempSpike XR Wireless Smart Meat Thermometer. To ensure optimal product performance, please read this manual thoroughly and retain it for future reference.

2. Components

• 1 x Wireless Smart Meat Thermometer (Base Station/Receiver)
• 2 x Stainless Steel Probes
• 1 x USB-C Charging Cable
• 1 x Signal Booster (Optional)
• 1 x User Manual

Visual Description of Components:

The TempSpike XR system includes a central Base Station (Receiver) which features an LCD screen displaying temperatures, meat types, and status icons. It has a built-in rechargeable battery, a USB-C port for charging, a tabletop stand, and a magnetic back. Two stainless steel probes, each with a heat-resistant cable, are used to measure internal meat temperatures. An optional Signal Booster is also provided to extend wireless range.

3. Base Station (Receiver)

3.1 Features

• LCD Screen: Displays all icons and temperatures.
• Backlight: Enhances visibility.
• Dual Probes: Monitors internal temperature of two meats and ambient temperature simultaneously.
• Alarms: Internal and ambient temperature alarms can be set.
• Temperature Range: Internal: 14°F to 212°F (-10°C to 100°C); Ambient: 14°F to 572°F (-10°C to 300°C).
• Battery Level Indicator: Shows remaining battery power.
• Design: Tabletop stand and magnetic back for versatile placement.
• Power: Built-in rechargeable lithium battery, charged via enclosed USB-C cable.

3.2 Buttons

• RESYNC Button: Press once to turn the device on/off. Press and hold to resync a new probe.
• ▲ Button: In PROG Mode or Ambient Temperature Setting Mode, press to increase the target temperature value. Press and hold for 2 seconds for faster increase.
• MEAT Button: Selects meat type: BEEF, VEAL, CHICKEN, PORK, POULT (Poultry), LAMB, FISH, HAM, GBEEF (Ground Beef), GPOUL (Ground Poultry), and PROG (Program - User Defined Temperature).
• PROBE ALARM Button: Cycles between PROBE BLACK and PROBE WHITE. Press and hold for 3 seconds to turn the internal temperature alarm on/off (indicated by an icon).
• AMBIENT ALARM Button: Press to set HIGH ambient temperature; use ▲/▼ to adjust the value when the HIGH icon digit blinks. Press again to set LOW ambient temperature; adjust value when the LOW icon digit blinks. Press again to exit. Settings confirm automatically after 5 seconds of inactivity. Press and hold for 3 seconds to turn the ambient temperature alarm on/off (indicated by an icon).
• TASTE Button: Selects meat doneness level: RARE, MED RARE, MEDIUM, MEDIUM WELL, WELL DONE.
• ▼ Button: In PROG Mode or Ambient Temperature Setting Mode, press to decrease the target temperature value. Press and hold for 2 seconds for faster decrease.
• °F/°C Button: Press to turn the backlight on/off. Press and hold for 3 seconds to switch between °F or °C temperature units. Backlight turns off automatically after 10 seconds of inactivity.
• RESET Button: Located on the back. Press and hold for over 3 seconds to restart the device if any malfunction occurs.

3.3 How to Charge the Base Station and Probes

1. Connect the provided USB-C charging cable to any USB charger to charge the base station. The battery level indicator will scroll during charging and stop when fully charged.

2. The base station also charges the probes. Place the probes into the probe storage holes on the base station. A "BI" sound will confirm charging initiation. The probe battery level indicator will scroll during charging and stop when full. All data will be cleared when probes are placed in storage holes.

3. The base station automatically turns off five minutes after both probes are placed in the storage holes.

3.4 How to Pair the Probe with the Base Station

The base station and probes are pre-paired. If re-pairing is necessary, follow these steps: 1. Press the RESYNC button to turn on the base station. 2. Remove the probe from the base station. 3. Press and hold the RESYNC button for 3 seconds. The temperature measured by the probe will appear on the display, indicating successful pairing. Note: One receiver can only pair with one black probe and one white probe.

3.5 How to Turn on/off the Sound of Button

Button sound is off by default. Press and hold the ▲ and ▼ buttons simultaneously for 3 seconds to turn button sound on or off.

4. Signal Booster (Optional)

4.1 Features

• Extended Range: Increases remote range between receiver and probe from 1,000ft (300M) to 2,000ft (610M) maximumly without obstructions.
• Auto-Sync: Synced with receiver and probe automatically upon power-on; no registration needed.
• Power Button: Press to turn on; press and hold for three seconds to turn off. It turns off automatically in 40 minutes if both probes are in the transmitter and the transmitter is turned off.
• Signal Indicator: Flashes green every four seconds if the signal from the probe is received; flashes red every four seconds if no signal is received.
• Power Indicator: Flashes red for low battery; solid red while charging; solid green when fully charged.
• RESET Button: Press to restart the device if any malfunction.
• Design: Hanging hole and magnetic back.
• Waterproof: IPX6 rated.

5. Purchasing Additional Signal Booster

The model number for the signal booster is TP860B/C. It can be ordered directly from Amazon or ThermoPro customer service. It is not recommended to sync more than one booster to a single receiver as it may affect connection. However, one signal booster can extend the range for multiple receivers.

6. Caution

• Probe Handling: Insert probes deeply into meat, ensuring only the handle is visible, to protect internal electronics from extreme heat.
• Microwave Use: Do NOT use probes in a microwave.
• Removal: Always wear gloves to remove hot probes from meat after cooking.
• Cleaning: Wipe probes with a kitchen towel or rag after each use. Probes can also be rinsed and washed in a dishwasher.
• Storage: After cleaning, place probes in the booster for charging and storage.
• Transmitter Care: Do not immerse the transmitter in water; wipe it with a damp cloth.
• Age Restriction: Not intended for use by persons aged 12 and under.
• Pacemaker Warning: The device contains a magnet that may affect artificial cardiac pacemakers. Users with pacemakers should maintain a distance of at least 1 foot (0.3 meter) from the device.

7. FCC Statement of Compliance

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

8. Declaration of Conformity

Hereby, the manufacturer declares that this product complies with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU and the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://buythermopro.com/eu-declaration-of-conformity/.

9. Disposal of the Electronic Appliance

This electronic appliance should not be disposed of with normal household waste. Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt.

10. Limited One-Year Warranty

ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year from the date of purchase. Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

11. Customer Service

Telephone: 1-877-515-7797 (USA & Canada)
49-215-493-19011 (DE)
44-808-164-1683 (UK)
61-180-057-7492 (AU)

Email: service@buythermopro.com

Hours: Monday-Friday: 8:00am-8:00pm (EST)

12. Specifications

*The stated transmission range is based on tests at an ambient temperature of 77°F or 25°C without any obstructions or electromagnetic interference. Your range can vary depending on the number of obstructions and electromagnetic interference in your environment.