ThermoPro TempSpike Plus TP-972

Introduction

This user manual provides detailed information about the TempSpike Plus device, a high-precision thermometer for both professional and home use. The manual covers everything from setup to troubleshooting to make usage as simple as possible.

Functions

The TempSpike Plus consists of a booster unit and wireless probes. The device is designed for accurate temperature measurement in various cooking applications.

Device Components:

• Probe: Inserts into food, measures both internal and ambient temperatures, IP67 waterproof.
• Booster: Receives temperature signals from probes and transmits them to a smart device. Also serves as a charging station for the probes.
• LCD Display: Shows temperature readings and device status.
• S Button: Controls power, pairing, and mode switching.
• Backlight Button: Activates the display backlight.
• USB-C Charging Port: For charging the booster.
• Magnets: For attaching the booster to metallic surfaces.
• Ambient Temperature Sensor: Located on the probe.
• Internal Temperature Sensor: Located within the probe.

Booster Functionality:

• The Booster receives temperature signals from the probes and relays them to your smart device.
• It also acts as a power source to charge the probes.

Probe Functionality:

• The probe can be inserted into meat, simultaneously measuring internal and ambient temperatures. It is IP67 waterproof.
• S Button: A short press turns on the Booster. When the Booster is on, a short press of the S button cycles through displaying the meat's internal temperature, ambient temperature, and automatic switching between the two on the LCD.
• If an alarm sounds from the Booster, it can be silenced by pressing the S button.
• A long press (3 seconds) of the S button initiates pairing of the booster with the probe.
• If probes are not appearing on the display or not connecting to the smart device, remove both probes and hold the S button for 10 seconds to perform a reset.

The device features a durable and waterproof design.

Accessories

1. 2x Wireless Probes
2. 1x Booster
3. 1x USB-C Charging Cable
4. 1x User Manual

Usage

Follow these steps to set up your TempSpike Plus and cook like a pro!

Step 1: Download the Application

Download the "TempSpike" application. Scan the QR code provided (or search for "TempSpike" in the iOS App Store or Google Play Store) and install the application on your smart device.

Step 2: Enable Bluetooth

Turn on Bluetooth in your device's Settings menu. If Bluetooth is already enabled, you can skip this step.

Step 3: Charge the Device

Fully charge the booster and probes. Connect the included USB charging cable to a USB power adapter. The booster's LCD display will show the charging status.

Step 4: Pair Probe with Booster

The probes are pre-paired with the booster via Bluetooth from the factory. After removing a probe, the temperature measured by that probe will appear on the LCD display.

Manual Probe Pairing:

For a new probe or a new booster, follow these steps:

1. Remove the probe from the booster.
2. Press and hold the S button until the temperature appears on the display. This indicates successful pairing.

Step 5: Pair with Smartphone

1. Turn on the booster by pressing the S button or removing a probe.
2. Launch the application and press the "Add Device" button. Select "Twin TempSpike Plus" from the list.

Step 6: Start Cooking

1. Insert the probe into the meat deep enough so that only the handle is visible.
2. Set the desired temperature, or select the meat type and cooking level within the application.
3. When the temperature reaches the target value, an alarm will sound from the application and/or the booster.

Warnings

• The probes contain sensitive electronics. Avoid extreme heat; always insert the probe so that only the handle remains outside.
• Do not use the TempSpike in a microwave oven.
• The range between the booster and probe can be up to 140 meters (460 ft) in open terrain, but can be drastically reduced in enclosed spaces (up to 4 meters/14 ft). Therefore, place the booster as close as possible to the probes.
• It is recommended to use gloves to remove probes after cooking.
• After use, wipe the probes with a paper towel or cloth. They can also be washed in a dishwasher.
• After use, always place them back in the booster for charging and storage.

Pacemaker Warning

The magnet in the booster may affect pacemaker operation. Maintain a distance of at least 30 cm (1 ft) from the device.

Note

This device complies with Part 15 of the FCC Rules. These rules are intended to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If interference occurs:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

The manufacturer declares that this product complies with the essential requirements of Directive 2014/53/EU on radio equipment and Directive 2014/30/EU on electromagnetic compatibility. The full declaration is available here: https://buythermopro.com/eu-declaration-of-conformity/

Electronic Waste Disposal

This electronic device should not be disposed of with household waste. Please hand it over to an official collection point or local recycling center. For questions, please contact your municipality.

[Symbol: Crossed-out wheeled bin]

Technical Specifications

* The specified range was determined based on tests conducted at 77°F (25°C) without obstacles and electromagnetic interference. Actual range may vary depending on the number of obstacles and environmental interference.

Distributor

Sunnysoft s.r.o.
Kovanecká 2390/1a
190 00, Prague 9 - Libeň
www.sunnysoft.cz