ThermoPro TP610 Dual Probe Meat Thermometer

1. Product Overview

Components:

• LCD Display
• LOCK/▼ Button
• ON/OFF/LIGHT/▲ Button
• SET/°C/°F Button
• Probe 1: Folding Probe
• Probe 2: Wired Probe
• USB Charging Port
• Bottle Opener
• Battery Indicator
• Built-in Magnet

Key Definitions:

LCD Display

Displays the current temperature of both probes.

LOCK/▼ Button

Press once to lock Probe 1's temperature for 5 seconds, press again to unlock. When using Probe 2, press ▼ to decrease target temperature. Press and hold to rapidly scroll digits.

ON/OFF/LIGHT/▲ Button

Press once to turn on. Press again for backlight, press again to turn off backlight. Press and hold for 2 seconds to turn off the thermometer. When using Probe 2, press ▲ to increase target temperature. Press and hold to rapidly scroll digits.

SET/°C/°F Button

Press once to set Probe 2 target temperature. Press and hold for 3 seconds to switch between °C and °F.

Probe 1-Folding Probe

Insert into food to get internal meat temperature.

Probe 2-Wired Probe

Insert into food to get internal meat temperature.

USB Charging Port

For charging the device.

Bottle Opener

Integrated bottle opener.

Battery Indicator

Displays remaining battery life.

Built-in Magnet

Allows attachment to magnetic surfaces.

2. Specifications

• Temperature Range: -58°F~572°F (-50°C~300°C). Displays LLL or HHH if outside this range.
• Resolution: 0.1°C/°F
• Temperature Accuracy: ±0.9°F from 32°F to 212°F (±0.5°C from 0°C to 100°C), otherwise ±3.0°F (±1.7°C).
• Auto-off Feature: 10 Minutes
• Battery: Built-in Lithium Rechargeable Battery
• Display: 180° Auto-Rotating Display
• Waterproof: IPX5
• Other Features: Built-in Magnet, Backlight

3. How to Use Folding Probe to Monitor Temperature

The thermometer features a folding probe for easy storage and use.

1. Pull the probe away from the thermometer body to turn it on. Fold the probe back to turn it off.
2. Press and hold the °C/°F button for 3 seconds to switch between Celsius (°C) and Fahrenheit (°F). The selected unit will be saved.
3. Insert the tip of the probe into the thickest part of the food being cooked.
4. Wait for the temperature reading to stabilize on the display. The reading is shown with a 180° viewing angle.
5. Press the LOCK button to hold the current temperature reading for 5 seconds.
6. The thermometer will automatically turn off if the probe is not folded in and no button has been pressed for 10 minutes.

Textual Description of Thermometer Image: A silver digital meat thermometer with a folding probe. The display shows two temperature readings, labeled P1 and P2, with numerical values. Below the display are three buttons: LOCK, ON/OFF/LIGHT/▲, and SET/°C/°F. The folding probe is extended, and a wired probe is connected to the side.

4. How to Use the Wired Probe to Monitor Temperature

1. Plug the wired probe into the corresponding socket on the side of the thermometer.
2. Ensure the probe cable is free of knots and the sensor plug is firmly and completely inserted into the socket. If the probe is not properly connected or is crimped, the display will show "HHH".
3. Press the SET button; the displayed temperature will begin to flash, indicating it's ready to set a target temperature.
4. Use the ▲/▼ buttons to adjust the target temperature. Press and hold the button to rapidly scroll through digits. Press SET again to confirm the target temperature.
5. Insert the probe tip into the thickest part of the meat, avoiding bone or gristle.
6. Place food into the cooking appliance. Before closing the door or lid, ensure there is enough slack in the steel mesh cable to prevent the probe from being pulled out. The thermometer should be placed outside the appliance on a stable surface, securely connected to the probes.
7. An alarm will sound when the internal food temperature reaches the target temperature. Press any button to stop the alarm.
8. Before removing food, disconnect the steel mesh cables from the thermometer. Do not touch hot probes or wires with bare hands during or after cooking; always wear heat-resistant gloves.

5. Helpful Hints

• When measuring different foods, it may be desirable to cool the probe tip first with cold water.
• Wipe the probe tip clean between readings, especially when measuring different foods or meats.
• The thermometer is designed for temporary, handheld use. Do NOT leave it in an oven or in extremely hot foods/liquids (over 572°F) for more than 1 minute.
• If the unit displays LLL or HHH, wait for the probe to reach room temperature. If the issue persists, the internal probe wire may be short-circuited due to moisture or heat damage.
• Do not immerse the probe or cable in water during cleaning. The probe/cable connection is not waterproof.
• Do not allow the probe or wire to contact flames.
• If the temperature reading seems too high or increases too quickly, check that the probe tip is not poking through the food. Reposition the tip to the center of the thickest part of the food, avoiding bone or fatty areas.
• Clean the stainless steel probe with hot water and soap, then rinse.
• To prevent damage, do not place the thermometer on a hot surface.
• Not intended for use by persons under 12 years of age.

6. Declaration of Conformity

The manufacturer declares that this product complies with the basic requirements and applicable regulations of the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsmall.com/eu-declaration-of-conformity/

7. Disposal of the Electronic Appliance

This electronic appliance should not be disposed of with normal household waste. Dispose of the unit at an approved facility or your local recycling center, observing current rules and regulations. Contact your local council if in doubt.

[crossed-out-wheelie-bin]

8. Limited One-Year Warranty

ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for one year from the date of purchase.

REGISTER your product after purchase to RECEIVE AN EXTENDED 3 YEARS Warranty on our website: https://itronicsmall.com/pages/garantie-registration

For repair or service under warranty, contact Customer Service by phone or email for packing and shipping instructions. This warranty grants specific legal rights, and you may have other rights that vary by state.

9. Customer Service

Call or Text: 1-877-515-7797 (USA & Canada Only) | 44-808-164-1683 (UK)

Email: service@buythermopro.com

Hours: Weekdays 8:00 AM - 8:00 PM EST (USA & Canada Only)

Hours: Weekdays 1:00 PM - 12:00 PM CET (France)

Hours: Weekdays 1:00 PM - 12:00 PM CET (UK)