VEVOR Printer Stand User Manual

Product Information

Model No.: STX001-047-01, STX001-047-02

Brand: VEVOR

Tagline: TOUGH TOOLS, HALF PRICE

Contact: CustomerService@vevor.com

Important Safety Information

WARNING:

Please read this manual carefully before using the product. Failure to do so may result in serious injury. SAVE THIS MANUAL.

ASSEMBLY PRECAUTIONS:

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the product.

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy. Do not allow children to play with or approach this item.
2. Use as intended only. Do not sit or stand on the table.
3. Inspect before every use. Do not use it if parts are loose or damaged.
4. Use only on flat, level, and hard surfaces.

Assembly Instructions

For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram of this manual. Unwrap and separate all parts on a clear work area.

TECHNICAL SPECIFICATIONS

PACKAGE CONTENTS

Panels:

• A x1
• B x1
• C x1
• D x1
• E x1
• F x2
• G x1
• H x2
• J x1
• K x1
• L x1
• M x1
• N x1
• P x1
• R x1

Hardware:

• 1 (Screws): 29 pcs
• 2 (Cam Bolts): 29 pcs
• 3 (Cam Locks): 26 pcs
• 4 (Screws): 5 pcs
• 5 (Screws): 2 pcs
• 6 (Screws): 2 pcs
• 7 (Screws): 2 pcs
• 8 (Screw): 1 pc
• 9 (Foot Pads): 2 pcs
• 10 (Foot Pads): 2 pcs
• 11 (Handles): 1 pc
• 12 (Screws): 52 pcs
• 13 (Foot Pad): 1 pc
• 14 (Dowels): 4 pcs
• 15 (Screws): 8 pcs

Assembly Steps:

STEP 1

Attach part G to part D using hardware 1 (x1) and 2 (x1).

STEP 2

Attach part B to part D using hardware 1 (x2), 2 (x2), and 3 (x2).

STEP 3

Attach two parts F to part B using hardware 1 (x4), 2 (x4), and 3 (x4).

STEP 4

Attach part A and part C to the assembly using hardware 1 (x8), 2 (x8), and 3 (x8).

STEP 5

Insert two parts H into the top section.

STEP 6

Attach part E to the front using hardware 1 (x6) and 3 (x6).

STEP 7

Attach foot pads 9 (x2) and 10 (x2) to the bottom. Secure with hardware 12 (x16).

STEP 8

Assemble the drawer runners. Attach parts K (x1) and L (x2) to part M (x1) using hardware 1 (x8) and 2 (x8). Repeat for part N (x1).

STEP 9

Assemble the drawer runners. Attach parts K (x1) and L (x2) to part M (x1) using hardware 1 (x8) and 2 (x8). Repeat for part N (x1). Secure with P (x2).

STEP 10

Attach part P (x2) to the assembled drawer runners using hardware 15 (x8).

STEP 11

Attach part M (x1) to the main body using hardware 7 (x1), 8 (x1), 4 (x2), and 12 (x4).

STEP 12

Attach the drawer slides using hardware 5 (x2), 6 (x2), and 12 (x12).

STEP 13

Assemble the drawers using hardware 5 (x2), 6 (x2), and 12 (x16).

STEP 14

Insert the assembled drawers into the stand using hardware 11 (x2) and 12 (x2).

STEP 15

Attach part R (x1) to the side using hardware 14 (x4).

STEP 16

Attach the door using hardware 11 (x2), 12 (x4), and 13 (x1).

Completion

The VEVOR Printer Stand is now assembled.

Company Information

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E, RANCHO CUCAMONGA, California, 91730 United States of America

EC REP: SHUNSHUN GmbH, Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany

UK REP: Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions, Preston, United Kingdom