Getting Connected
- 2.4GHz Receiver: Connect the receiver to your device's USB port. Press FN + R for 3 seconds to pair.
- Bluetooth: Switch the toggle to Bluetooth mode. Press FN + Q for 3 seconds to pair with the device named 'Lemokey P2 HE'.
- Wired Connection: Switch the toggle to Cable mode and connect using the provided cable.
For optimal wireless performance, use the included extension adapter to position the 2.4GHz receiver closer to the keyboard.
Lemokey Launcher App
Visit launcher.lemokey.com to access the Lemokey online launcher app. This application allows users to remap keys, adjust actuation points, assign multiple commands, and enter game controller mode.
Note: The online launcher app currently supports the latest versions of Chrome, Edge, and Opera browsers.
Troubleshooting & Updates
Factory Reset: Power on the keyboard, then press and hold FN + J + Z for 3 seconds. The backlight will flash red, indicating a reset.
Firmware Update: Visit launcher.lemokey.com, ensure the keyboard is in Cable/Wired mode, and follow the 'Firmware Update' instructions.
For step-by-step guides, search for "firmware" on lemokey.com.
Warranty Information
Lemokey keyboards are highly customizable. During the warranty period, Lemokey will replace defective keyboard components, not the entire keyboard.
If you encounter issues, please reach out to support at support@lemokey.com.
