Lemokey P1 HE Wireless Magnetic Switch Keyboard

Product Overview

Fully Assembled Version

The fully assembled version includes the following components:

Keyboard:

• 1 x Fully Assembled Keyboard
• 1 x Case
• 1 x PCB
• 1 x Aluminum Plate
• 1 x Sound Absorbing Foam
• 1 x EPDM Foam
• 1 x Bottom Case PET Film
• 12 x 50° Gaskets Silicone Beans Installed
• 4 Sets x Stabilizers
• 1 Set x Keycaps (PBT Double-shot)
• 1 Set x Magnetic Switches

Cable:

• 1 x Type-A to Type-C Cable

Receiver:

• 1 x Type-A 2.4GHz Receiver
• 1 x Extension Adapter For Receiver

Tools:

• 1 x Keycap-Switch Puller
• 1 x Screwdriver
• 1 x Hex Key

Diagram of the keyboard layout, showing all keys.

Quick Start Guide

The default system for this product is Windows.

1. Connect 2.4GHz Receiver

Connect the 2.4GHz receiver to your device's USB port.

Switch the toggle to the 2.4GHz mode.

Diagram showing a laptop connecting to a USB port with the 2.4GHz receiver. Another diagram shows the mode toggle switch set to 'G / BT' with 'G = 2.4GHz' indicated. A keyboard layout diagram highlights the relevant keys.

Note: For the best wireless experience, use the extension adapter for the receiver and place it close to your keyboard for lower latency and fewer signal interferences.

2. Connect Bluetooth

Switch the toggle to the Bluetooth option.

Press FN + 1 (for 4 seconds) to activate Bluetooth pairing. The Bluetooth indicator will flash.

Search for the device named "Lemokey P1 HE" on your device and connect.

Diagram showing a laptop and keyboard. The mode toggle switch is shown set to 'G / BT' with 'BT = Bluetooth' indicated. A keyboard layout diagram highlights the 'FN + 1' keys.

3. Connect Cable

Connect the keyboard using the provided Type-C cable.

Switch the toggle to Cable mode.

Diagram showing a laptop, a USB Type-C cable, and the keyboard. The mode toggle switch is shown set to 'G / BT' with 'Cable' indicated.

4. The Lemokey Launcher App

Visit launcher.lemokey.com to use the online Launcher web app.

This software allows you to remap keys, create macro commands, or flash the firmware.

If the Launcher cannot recognize your keyboard, please contact support for instructions.

Notes:

• The online Launcher can only run on the latest versions of Chrome, Edge, and Opera browsers.
• The Launcher only works when the keyboard is connected by wire to the computer.

Icon representing the Lemokey Launcher App with a rocket ship.

Advanced Features & Settings

5. Set Up Mac Layer

Use the online launcher app to remap your Windows keys to Mac keys.

Diagram showing the keyboard layout and the Lemokey app icon.

6. The Backlight

Change Lighting Effect: Press FN + Q.

Turn Backlight On/Off: Press FN + Tab or FN + Knob (press).

Diagrams highlighting the FN + Q keys and FN + Tab keys on the keyboard.

7. Adjust Backlight Brightness

Increase Brightness: Press FN + W.

Decrease Brightness: Press FN + S.

Diagrams highlighting the FN + W keys and FN + S keys on the keyboard.

8. Adjust Backlight Speed

Increase Speed: Press FN + T.

Decrease Speed: Press FN + G.

Diagrams highlighting the FN + T keys and FN + G keys on the keyboard.

Key Layers and Descriptions

Default Key Layout (Layer 0)

Layer 0 is the default layer.

Diagram of the default keyboard layout.

Key definitions: LWIN = Left Windows, LALT = Left Alt, RALT = Right Alt, RCTL = Right Ctrl.

Layer 1

Layer 1 is activated when you press the FN/MO(1) key.

Diagram of the keyboard layout showing Layer 1 key functions.

Layer 2 / Layer 3

These are blank layers.

Diagram showing blank keyboard layers.

Key Description

Connectivity Modes

2.4GHz Mode

1. Connect the 2.4GHz receiver to your device's USB port.
2. Switch the toggle to the 2.4GHz option ('G'). The keyboard will automatically connect.

Bluetooth Mode

1. Switch the toggle to the Bluetooth option.
2. Press FN + 1 for 4 seconds to activate Bluetooth pairing (indicator flashes).
3. Search for "Lemokey P1 HE" on your device and connect.

This keyboard supports pairing up to 3 devices simultaneously via key combinations FN + 1, FN + 2, or FN + 3.

Wired Mode

1. Switch the toggle to the Cable option.
2. Connect the keyboard with the provided USB Type-C cable.
3. Backlighting will turn on.

Note: Under Wired Mode, the keyboard will not enter Battery Saver Mode.

Switching Bluetooth Devices

Short press key combinations FN + 1 / FN + 2 / FN + 3 to switch between paired devices.

Reconnecting

1. Switch the keyboard to the Bluetooth option.
2. The Bluetooth indicator flashes and automatically pairs with the last paired device.
3. If the indicator is off, press any button to re-enter connection mode.

The keyboard must have been previously paired to perform this function.

Turning Off the Keyboard

Switch the mode toggle to Cable and unplug the power cable.

Troubleshooting

Pairing Issues (Bluetooth)

If unable to pair, confirm the device is Bluetooth-capable. Restart the device and try pairing again.

On Windows, new Bluetooth connections may require software updates. Wait at least 20 minutes after pairing before restarting the computer.

Ensure your device is configured to accept Bluetooth connections (Windows) and supports external keyboards (HID profile).

My keyboard isn't working in Bluetooth mode:

• For Computer/Smartphone: Go to Bluetooth settings, select the keyboard, remove/delete/unpair it, then restart your device.
• For Keyboard: Turn the keyboard off and back on, then reconnect.

Pairing Issues (2.4GHz)

Ensure the toggle is set to 2.4 GHz. Remove the receiver, press FN + 4 for 4 seconds to force pair, then reinsert the receiver. Keep the keyboard within 20 cm of the receiver for optimal pairing.

Wireless Connection Interruption

Check if the keyboard is resting on a metal surface that might interfere with the wireless signal.

Third-Party Input Tools Incompatibility

Due to compatibility, version, brand, and driver differences in Windows/Android OS, third-party input tools may be affected. Ensure your operating system and drivers are up to date.

Function Keys or Multimedia Keys Not Working

Functions of certain keys may be disabled due to compatibility, system version, brand, or driver issues.

Function Keys: F1 / F2 / F3 / F4 / F5 / F6 / F7 / F8 / F9 / F10 / F11 / F12

Multimedia Keys: Play/Pause, Next, Previous, Mute, Volume Up, Volume Down, Screen Brightness Up, Screen Brightness Down, RGB Toggle, RGB Mode Next, RGB Mode Previous, Hue Increase, Hue Decrease, RGB Speed Increase, RGB Speed Decrease, Battery Life, N-key rollover.

Diagram showing the multimedia keys and their symbols.

Specifications

Technical specifications are subject to change without notice.

LED Status Overview

Warranty

The keyboard is highly customizable and easy to assemble. If any component has an issue during the warranty period, only the defective parts will be replaced, not the entire keyboard.

Image of a 'WARRANTY' seal.

Safety Precautions

• Do not place the product, accessories, or packaging where children can reach them to prevent accidental choking hazards.
• Keep the product dry to avoid corrosion.
• Do not expose the product to extreme temperatures below -10°C (14°F) or above 50°C (122°F) to maintain the lifespan of the keyboard or battery.

Find Us

Website: https://www.lemokey.com

Support Email: support@lemokey.com

Social Media: Facebook | Instagram | X (Twitter)

Designed by Lemokey

Made in China

Execution Standard: GB/T 14081-2010
After-sales Hotline: 400-0766268
Address: Room 201, Building 2, 24 Dafu Road, Wenkeng Industrial Zone, Bantian Street, Longgang District, Shenzhen City, China