TECNO CC6 CAMON 12 Air User Manual
Brand: TECNO
Model: CC6 CAMON 12 Air
Purpose and Package Contents
Thank you for choosing and purchasing the TECNO CC6 CAMON 12 Air smartphone. This device is designed for mobile radiotelephone communication systems operating on GSM 900/1800 standards. It supports packet data transmission technology (GPRS Class B) and enhanced channel data transmission with eight-phase frequency modulation (EDGE), UMTS 900/2000 standards, high-speed packet data access (HSDPA) and uplink (HSUPA), 802.11 b/g/n, and 802.15 (Bluetooth) standards, as well as LTE-FDD high-speed wireless data transmission.
Package Contents:
- Smartphone
- Charger
- USB cable
- User Manual
- Warranty Card
Charger Specifications:
- Input Voltage: 100-240 V
- Current: 500 mA
- Frequency: 50-60 Hz
- Output Voltage: 5 V
- Output Current: 2 A
Smartphone Specifications:
- GSM 900/1800 radiostation
- Bluetooth 5.0 support
- 3G
- Wi-Fi b/g/n
- LTE B3/B7/B20
- Android 9.0 OS
Note: Package contents may be changed without prior notice.
Device Overview
Front View:
- 1. Front Camera
- 2. Volume Key
- 3. Power Key
SIM Card Usage:
Simultaneous operation of both slots in 3G/4G networks is not supported. The SIM card for 3G/4G network operation can be selected from the menu. For nano-SIM, please contact your service provider.
Memory Card and Battery:
The memory card is not included in the package and is sold separately. The phone's battery is non-removable. Attempting to remove it may cause irreversible damage to the device.
SIM Slot Restrictions:
- Do not install other types of SIM cards (including those with adapters).
- Do not install the SIM card in the wrong position (refer to the corner cut).
- Do not use cut SIM cards of other types or sizes.
Failure to comply with these rules will lead to damage of the SIM slot and denial of warranty service.
Official Information
All names of installed third-party applications are registered trademarks. Third-party services installed on the device may request access to personal information. Service data may be sent via mobile networks. This information may be used for warranty activation and software licenses. Please carefully review the privacy policy of third-party applications.
The TECNO CC6 CAMON 12 Air mobile device complies with international requirements for radio frequency radiation exposure. The specific absorption rate (SAR) limit does not exceed 2.0 W/kg. These permissible safe exposure limits were developed by the independent research organization ICNIRP and exclude the possibility of harm to human health.
Some mobile phone functions depend on the services and settings of the mobile operator. Some functions may be enabled or disabled by the operator, and their functional range may be limited by network settings. Information on the availability and cost of specific functions can be clarified with the mobile operator.
Manufacturing Date:
The manufacturing date of the TECNO CB7 device is indicated on the sticker located under the battery. It is represented by the first two symbols of the serial number (S/N), where the first symbol indicates the year of production, and the second indicates the month of production.
Year of Production:
- H - 2018
- I - 2019
Month of Production:
- 1 - January
- 2 - February
- 3 - March
- 4 - April
- 5 - May
- 6 - June
- 7 - July
- 8 - August
- 9 - September
- X - October
- Y - November
- Z - December
The manufacturing date of the charger is indicated on the sticker by the last six symbols of the code: XXX (internal classification) YYYYMM, where YYYY is the year and MM is the month of production. The manufacturing date of the battery is indicated in the format YYYY/MM/DD, representing the year, month, and day of product manufacturing, respectively.
The service life of the equipment is 2 years from the date of sale.
All products sold have a quality certificate indicating the manufacturer's name, the regulatory documentation under which it was produced, the manufacturing date, and the expiration date.
Warning: The manufacturer reserves the right to make changes to this document and the product without notice. The specifications and descriptions provided herein may differ from the actual product specifications and descriptions. Failure to comply with this manual may result in the phone malfunctioning and its warranty being voided.
Warranty Service
The company's warranty obligations and free service apply to TECNO products intended for sale and purchased in the Russian Federation. More detailed information on warranty conditions is provided in the warranty service booklet included with your purchased product.
The authorized service center for TECNO is "MT-Service": http://www.mtservice.ru/
A full list of authorized TECNO service centers is available on the website: http://www.mtservice.ru/service-centers
More information about the company's products is available on the websites:
Operating Rules
Follow the rules for using a mobile phone while driving. Use the "Hands-Free" function or stop the car while talking. Placing the phone in the airbag deployment zone may cause serious injury if the airbag deploys.
It is not recommended to expose the device to high temperatures, pressure, or high humidity. It is not recommended to subject the phone to strong impacts, as this may cause it to malfunction.
The radiation from a mobile phone may cause interference with other communication devices, including regular phones, radio and TV receivers, and office equipment.
Do not place the phone and its accessories in microwave ovens. This may lead to unforeseen consequences, from equipment failure to fire.
Observe the rules for using mobile devices on airplanes, in medical facilities, at gas stations, in chemical plants, and in other places where there are restrictions on mobile communication use due to interference with sensitive equipment or the presence of flammable materials.
Do not disassemble the device and its accessories (battery). This may lead to its malfunction and battery leakage. The phone's battery is non-removable! Attempting to remove it may cause irreversible damage to the device!
Do not cover the phone while charging. This may lead to overheating and ignition of the device.
Protect the smartphone's liquid crystal display from impacts. If the display is damaged and liquid crystal substance gets into your eyes, immediately rinse your eyes with water and consult a doctor.
Using sharp objects to operate the touchscreen may cause it to break.
The radiation from a mobile phone may cause interference with other communication devices, including regular phones, radio and TV receivers, and office equipment.
Using a non-original battery may lead to battery leakage or ignition.
Do not attempt to open the device in any way other than as specified in the manual. Unauthorized self-repair or repair at a non-authorized service center voids the warranty.
When charging, the phone should be placed in a well-ventilated area, away from flammable and explosive objects. Do not charge the device in rooms with high humidity (bathrooms). If water or other liquid gets onto the charging device, immediately unplug it from the outlet.
Dirt and dust in the outlet can interfere with the normal charging process. Remember to wipe the charger from dust.
Adhere to the specified AC voltage values. Incorrect voltage may lead to fire, damage to the phone, and charger. Do not short-circuit the charger. Short-circuiting can cause electric shock, smoke, and device damage.
Do not use the charger if the cable is visibly damaged to avoid fire or electric shock. Do not disassemble or modify the charger.
Do not place heavy objects on the charger cable. When unplugging from the outlet, pull the charger block. Do not pull the cable!
Transportation, Storage, and Disposal
Product transportation is carried out in the manufacturer's packaging using all types of transport over any distance. The product must be packed in packaging, containers, and other components and materials that ensure protection of the phones from damage, spoilage, and loss, to ensure their safety during transportation, transshipment, reloading, transportation, and storage, as well as to exclude access to the contents and the possibility of causing harm to the cargo, baggage, or carrier's property.
Long-term storage of the product is carried out in double packaging: inner and outer. Special packaging paper or polyethylene film is used for internal packaging. Original boxes in which the phones were received from the manufacturer are used as external packaging.
Radiostations and their components must be stored under climatic conditions:
- Ambient air temperature from +5°C to +50°C;
- Relative air humidity up to 80% at +25°C.
Disposal of radiostations and their components with household waste is prohibited and must be carried out at specialized disposal sites.
Security
Warning: The smartphone has anti-theft protection through the entered Google account: E-mail and password. Save this data in another secure location; it will be required later. Losing this data may incur additional costs.
Made in China
EAC
