TECNO CAMON 12 User Manual

Introduction and Package Contents

Thank you for choosing and purchasing the TECNO CC7 smartphone, marketing name – CAMON 12. The TECNO CC7 CAMON 12 smartphone is designed to operate as part of a mobile radiotelephone system of the GSM 900/1800 standard as a terminal subscriber device with support for packet data transmission mode (GPRS class B) and enhanced channel data transmission with eight-phase frequency modulation (EDGE), UMTS 900/2000 standards and high-speed packet access mode on the downlink (HSDPA) and uplink (HSUPA), 802.11 b/g/n and 802.15 (Bluetooth) standards, as well as the high-speed wireless data transmission standard (LTE-FDD).

The purchased product package includes:

• Smartphone
• Charger
• USB cable
• User manual
• Warranty card

Main smartphone specifications:

• GSM 900/1800 radiotelephone
• Bluetooth 5.0 support
• 3G
• Wi-Fi b/g/n
• LTE B3/B7/B20
• OS Version: Android 9.0

Main charger specifications:

• Input voltage: 100-240 V
• Current: 500 mA
• Frequency: 50-60 Hz
• Output voltage: 5V
• Output current: 2 A

Note: The package contents may be changed without prior notice.

Getting Started with the Phone

The phone has the following components:

1. Front camera
2. Volume button
3. Power button

Important: Simultaneous operation of both SIM slots in 3G/4G networks is not supported. A SIM card for 3G/4G network operation can be selected from the menu. For nano-SIM, please contact your service provider.

Important: A memory card is not included in the delivery package and is sold separately! The phone's battery is non-removable! Attempts to remove it yourself may lead to irreversible damage to the device!

Important: The SIM slot prohibits:

• Installing other types of SIM cards (including those with adapters).
• Installing a SIM card in the wrong position (see the corner cut position).
• Using cut SIM cards of a different type and size.

Failure to comply with these rules will lead to damage of the SIM slot and refusal of warranty service.

Official Information

All names of installed third-party applications are registered trademarks. Third-party services installed on the device may request access to personal information. Service data may be sent via mobile networks. This information may be used for warranty activation and software licenses. Please carefully review the privacy policy of third-party applications.

The TECNO CC7 CAMON 12 mobile device complies with international requirements for radiofrequency exposure. The specific absorption rate (SAR) limit does not exceed 2.0 W/kg. These permissible limits for safe exposure were developed by the independent research organization ICNIRP and exclude the possibility of harm to human health.

Some functions of the mobile phone depend on the services and settings of the mobile operator. Some functions may be enabled or disabled by the operator, and their functional range may be limited by network settings. Information about the availability and cost of various functions can be clarified with the mobile operator.

The manufacturing date of the TECNO CC7 device is indicated on the label located under the battery. It is represented by the first two symbols of the S/N serial code, where the first symbol indicates the year of production, and the second symbol indicates the month of production.

Year of production:

• H – 2018
• I – 2019

Month of production:

• 1 – January
• 2 – February
• 3 – March
• 4 – April
• 5 – May
• 6 – June
• 7 – July
• 8 – August
• 9 – September
• X – October
• Y – November
• Z – December

The manufacturing date of the charger is indicated on the label by the last six symbols of the code: XXX (internal classification) YYYYMM, where YYYY is the year and MM is the month of product manufacturing. The manufacturing date of the battery is indicated in the format YYYY/MM/DD, which represents the year, month, and day of product manufacturing, respectively. The service life of the equipment is 2 years from the date of sale.

All products sold have a quality certificate indicating the name of the manufacturer, the regulatory documentation according to which it was produced, the manufacturing date, and the end of the sales period.

Attention! The manufacturer reserves the right to make changes to this document and the product without prior notice. All specifications and descriptions provided herein may differ from the actual product specifications and descriptions. Failure to comply with this manual may lead to the phone malfunctioning and its warranty service being terminated.

Warranty Service

The company's warranty obligations and free service apply to TECNO products intended for sale and purchased within the Russian Federation. More detailed information on warranty service conditions is provided in the warranty service booklet included with your purchased product.

The authorized TECNO service center is "MT-Service": http://www.mtservice.ru/

A full list of authorized TECNO service centers is available on the website: http://www.mtservice.ru/service-centers

Attention! More detailed information about the company's products is available on the websites:

• www.tecno-mobile.com/ru
• www.facebook.com/TECNOMobileRussia
• www.vk.com/tecnomobilerussia
• www.instagram.com/tecnomobilerussia

Operating Rules

Follow the rules for using mobile communication while driving. Use the "Hands-Free" function or stop the car while talking. The phone's position in the airbag deployment zone can lead to serious injury in the event of airbag deployment.

It is not recommended to expose the device to high temperatures, pressure, or high humidity. It is not recommended to subject the phone to strong impacts, as this may lead to its failure.

Mobile phone radiation may cause interference with other communication devices, including ordinary telephones, radio and television receivers, and office equipment.

Do not place the phone and its accessories in microwave ovens. This may lead to unforeseen consequences, from equipment failure to fire.

It is necessary to observe the rules for using mobile devices in airplanes, medical facilities, gas stations, chemical production facilities, and other places where there are restrictions on the use of mobile communication due to interference with sensitive equipment or the presence of flammable materials.

Do not disassemble the device and its accessories (battery). This may lead to its failure and battery leakage. The phone's battery is non-removable! Attempts to remove it yourself may lead to irreversible damage to the device!

Do not cover the phone while charging. This may lead to overheating and ignition of the device.

Protect the smartphone's liquid crystal display from impacts. In case of display damage and contact of liquid crystal substance with eyes, rinse eyes immediately with water and consult a doctor.

Using sharp objects to operate the touchscreen may lead to its malfunction.

Mobile phone radiation may cause interference with other communication devices, including ordinary telephones, radio and television receivers, and office equipment.

Using a non-original battery may lead to battery leakage or ignition.

Do not attempt to open the device in any way other than as indicated in the manual. Unauthorized self-repair or repair of the phone at an unauthorized service center voids the warranty.

During charging, the phone should be placed in a well-ventilated area, away from flammable and explosive objects. Do not charge the device in rooms with high humidity (bathrooms). If water or other liquid gets on the charger, immediately unplug it from the outlet.

Dirt and dust in the outlet may interfere with the normal charging process. Do not forget to wipe the charger from dust.

Adhere to the specified AC voltage values. Incorrect voltage may lead to fire, damage to the phone, and charger. Do not short-circuit the charger. Short-circuiting leads to electric shock, smoke, and device damage.

Do not use the charger if the cable is visibly damaged to avoid fire or electric shock. Do not disassemble or modify the charger.

Do not place heavy objects on the charger cable. When unplugging from the outlet, pull the charger block. Do not pull the cable!

TRANSPORTATION, STORAGE, UTILIZATION

Product transportation is carried out in the manufacturer's packaging by all modes of transport over any distance. The product must be packed in containers, enclosures, and other components and materials that ensure protection of phones from damage, spoilage, and loss, in order to ensure their safety during transportation, handling, transshipment, and storage, as well as to prevent access to the contents and the possibility of causing harm to cargo, baggage, or carrier property.

Long-term storage of products is carried out in double packaging: internal and external. Special packaging paper or polyethylene film is used for internal packaging. Original boxes in which the phones were received from the manufacturer are used as external packaging.

Subscriber radiostations and their комплектующие must be stored under climatic conditions:

• ambient air temperature from +5°C to +50°C;
• relative air humidity up to 80% at +25°C.

Disposal of subscriber radiostations and their комплектующие together with household waste is prohibited and is carried out at special disposal points.

Attention! The smartphone has anti-theft protection implemented through the entered Google account: E-mail and password. Save this data in another secure location; it will be required later. Loss of this data may incur additional costs.

Made in China