User Manual

Purpose and Package Contents

Thank you for choosing and purchasing the TECNO CB7 smartphone, marketed as CAMON 11S. The TECNO CB7 CAMON 11S smartphone is designed for operation within GSM 900/1800 mobile radiotelephone communication systems as an end-user subscriber device with support for packet data transmission (GPRS class B) and enhanced channel data transmission with octal phase modulation (EDGE), UMTS 900/2000 standards, and high-speed packet data access (HSDPA) and uplink (HSUPA) standards, 802.11 b/g/n and 802.15 (Bluetooth) standards, as well as the high-speed wireless data transmission standard (LTE-FDD).

The purchased product package includes:

• Smartphone
• Charger
• USB cable
• User Manual
• Warranty Card

Basic specifications of the charger:

• Input voltage: 100-240 V
• Current: 500 mA
• Frequency: 50-60 Hz
• Output voltage: 5 V
• Output current: 2 A

Basic specifications of the smartphone:

• Subscriber station GSM 900/1800
• Bluetooth 5.0 support
• 3G
• Wi-Fi b/g/n
• LTE B3/B7/B20
• Android OS Version 9.0

Note: The package contents may be changed without prior notice.

Getting Started with the Phone

Front Camera

Volume Key

Power Key

SIM/Memory Card Slot

SIM/Memory Card Slot

Attention! Simultaneous operation of both slots in 3G/4G networks is not supported. The SIM card for 3G/4G network operation can be selected from the menu. To obtain a nano-SIM, please contact your service provider.

Attention! The memory card is not included in the delivery package and is sold separately! The phone's battery is non-removable! Attempts to remove it yourself may lead to irreversible damage to the device!

Attention! Do not insert the following into the SIM slot:

• Other types of SIM cards (including those with adapters).
• SIM cards in the incorrect position (see the corner cut-out position).
• Cut SIM cards of a different type and size.

Failure to comply with these rules will lead to damage of the SIM slot and denial of warranty service.

OFFICIAL INFORMATION

All names of installed third-party applications are registered trademarks. Services of third parties installed on the device may request access to personal information. Service data may be sent via mobile networks. This information may be used to activate warranty and software licenses. Please carefully review the privacy policy of third-party applications.

The TECNO CB7 CAMON 11S mobile device complies with international requirements for radio frequency range exposure. The specific absorption rate (SAR) limit does not exceed 2.0 W/kg. These permissible limits for safe exposure were developed by an independent scientific research organization ICNIRP and exclude the possibility of harm to human health.

Some mobile phone functions depend on the services and settings of the cellular operator. Some functions may be enabled or disabled by the operator, and their functional range may be limited by network settings. Information about the availability and cost of these functions can be clarified with the cellular operator.

The manufacturing date of the TECNO CB7 device is indicated on the sticker located under the battery. It is represented by the first two symbols of the S/N serial code, where the first symbol indicates the year of production, and the second indicates the month of manufacture.

First symbol - year:

• H - 2018
• I - 2019

Second symbol - month:

• 1 - January
• 2 - February
• 3 - March
• 4 - April
• 5 - May
• 6 - June
• 7 - July
• 8 - August
• 9 - September
• X - October
• Y - November
• Z - December

The manufacturing date of the charger is indicated on the sticker by the last six symbols of the code: XXX (internal classification) YYYYMM, where YYYY is the year, and MM is the month of product manufacturing. The manufacturing date of the battery is indicated in the format YYYY/MM/DD, which represents the year, month, and date of product manufacturing, respectively.

The service life of the equipment is 2 years from the date of sale.

All products sold have a quality certificate indicating the manufacturer's name, the regulatory documentation according to which it was produced, the manufacturing date, and the expiration date.

Attention!

The manufacturer reserves the right to make changes to this document and the product without prior notice. All specifications and descriptions provided here may differ from the actual product specifications and descriptions. Failure to comply with this manual may lead to the phone malfunctioning and its removal from further warranty service.

WARRANTY SERVICE

The company's warranty obligations and free service maintenance apply to TECNO products intended for sale and purchased in the Russian Federation. More detailed information on warranty conditions is provided in the warranty service booklet included with your purchased product.

The authorized TECNO service center is "Pro-Service": www.pro-service.su

A full list of authorized TECNO service centers is available on the website: pro-service.su/centers

Attention!

More detailed information about the company's products is available on the websites:

• www.tecno-mobile.com/ru
• www.facebook.com/TECNOMobileRussia
• www.vk.com/tecnomobilerussia
• www.instagram.com/tecnomobilerussia/

OPERATING RULES

Follow the rules for using mobile communication while driving. Use the "Hands-Free" function or stop the car while talking. Positioning the phone in the airbag deployment zone may cause serious injury in case of airbag activation.

It is not recommended to expose the device to high temperatures, pressure, or high humidity. It is not recommended to subject the phone to strong impacts, as this may lead to its malfunction.

The radiation from the mobile phone may cause interference with other communication devices, including ordinary telephones, radio and television receivers, and office equipment.

Do not place the phone and its accessories in microwave ovens. This may lead to unforeseen consequences, from equipment failure to fire.

You must comply with the rules for using mobile devices on airplanes, in medical facilities, at gas stations, in chemical production facilities, and other places where there are restrictions on mobile communication use due to interference with sensitive equipment or the presence of flammable materials.

Do not disassemble the device and its accessories (battery). This may lead to its failure and battery leakage. The phone's battery is non-removable! Attempts to remove it yourself may lead to irreversible damage to the device!

Do not cover the phone while charging. This may lead to overheating of the device and ignition.

Protect the smartphone's liquid crystal display from impacts. In case of display damage and liquid crystal substance getting into the eyes, immediately rinse your eyes with water and consult a doctor.

Using sharp objects to control the touchscreen may lead to its breakage.

The radiation from the mobile phone may cause interference with other communication devices, including ordinary telephones, radio and television receivers, and office equipment.

Using a non-original battery may lead to battery leakage or ignition.

Do not attempt to open the device in a way other than specified in the manual.

Self-repair or repair of the phone at an unauthorized service center voids the warranty.

When charging, the phone should be placed in a well-ventilated area, away from flammable and explosive objects. Do not charge the device in rooms with high humidity (bathrooms). If water or other liquid gets on the charger, immediately unplug it from the outlet.

Dirt and dust in the outlet may interfere with the normal charging process. Remember to wipe the charger from dust.

Adhere to the specified AC voltage values. Incorrect voltage may lead to fire, damage to the phone, and the charger. Do not short-circuit the charger. Short-circuiting leads to electric shock, smoke, and device damage.

Do not use the charger if the cable is visibly damaged to avoid fire or electric shock. Do not disassemble or modify the charger.

Do not place heavy objects on the charger cable. When unplugging from the outlet, pull the charger block. Do not pull the cable!

TRANSPORTATION, STORAGE, UTILIZATION

Product transportation is carried out in the manufacturer's packaging using all types of transport over any distance. The product must be packed in containers, vessels, and other materials that ensure protection of the phones from damage, spoilage, and loss, to ensure their safety during transportation, handling, transshipment, transportation, and storage, as well as to prevent access to the contents and the possibility of damage to cargo, baggage, or carrier property.

Long-term storage of the product is carried out in double packaging: internal and external. For internal packaging, special wrapping paper or polyethylene film is used. The external packaging uses original boxes in which the phones were received from the manufacturer.

Subscriber stations and their комплектующие should be stored under climatic conditions:

• Ambient air temperature from +5°C to +50°C;
• Relative air humidity up to 80% at +25°C.

Disposal of subscriber stations and their комплектующие together with household waste is prohibited and is carried out at special disposal sites.

Attention!

The smartphone has anti-theft protection through the entered Google account: E-mail and password. Save this data in another secure location; it will be required later. Loss of this data may incur additional costs.

Made in China

EAC