What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Chair
- Seat Rod
- Z-bracket
- 4 x Pneumatic Wheels
- Steering Push/Pull Bar
- Telescopic Bazooka
- 100mm Bowl Camera Riser
- Euro Adapter
- Quad-4 Dolly with Side Boards
- Track Wheel Set with 4 x Balancing Ring (P-TWS-QS)
Doorway Dolly Setup
Firstly, insert 4 Pneumatic Wheels to the wheel rod of the Dolly. Tighten nuts properly with the help of the provided tool to secure it.
NOTE: By correctly using Steering Push/Pull Bars, it is possible to maneuver the Quad Dolly with extreme precision.
Position a single Steering Push/Pull Bar centrally on the steering rod mount located on the rear axle of the dolly. Connect it properly by locking with the provided knob.
Position dual Steering Push/Pull Bars on the steering rod mount located on the rear axle of the dolly. Connect them properly by locking with the provided knob.
NOTE: You can use both Steering Bars together for heavier setups.
Chair Setup
To mount the Chair, you need to connect the Z-Bracket onto the dolly base.
Insert the Seat Rod into the Z-Bracket and lock it securely with the locking knob.
Now attach the Chair with the Z-Bracket and tighten the provided knob to fix it accurately.
NOTE: The Chair is adjustable and moves in a forward/backward position, to provide more comfort to the operator.
NOTE: Additional Side Platforms can be used to extend the size of the Quad-4 Pro Dolly.
Finally, insert 2 Side Boards into the 2 connection rods found on each side of the Main Dolly Platform and secure them appropriately.
NOTE: Mounting of the Euro Adapter enables fitting of various camera mounting accessories such as Bazooka, Risers, and other Adapters etc.
Take out the allen bolts from the dolly base to attach the Euro Adapter.
Place the Euro Adapter by carefully aligning the holes on the dolly. Then tighten the allen bolts back to secure it properly on the base.
Track Wheel Setup
Loosen the nut from the pneumatic wheel, as shown in the images.
Detach the wheel from the quad dolly and insert the provided balancing ring.
Fully secure the balancing ring to the wheel rod, then insert the rod into the track wheel.
Secure the balancing ring to the wheel rod with a tool, as shown in the image. Place the dolly on the track.
NOTE: Dolly track wheels move smoothly on a straight and curved track, as shown in the images.
Final Assembly
YOUR PROAIM QUAD-4 PRO CAMERA DOORWAY DOLLY ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty and Liability
Warranty: PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, PROAIM will repair the product without charge for labor or parts. The warranty does not cover transportation costs, nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.
Liability: PROAIM is not liable for damage caused by products not supplied by PROAIM, or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than PROAIM's authorized company.
Contact Us: In case of any kind of dissatisfaction, please contact PROAIM immediately. PROAIM promises its utmost support and care until the product is used.
